Journal article · 2024 · Open access
Influence of V concentration in TiAlSiVN coating on self-lubrication, friction and tool wear during two-pass dry turning of austenitic steel 316 L
Tribology International, 193, 109355 · Published 2 February 2024 · DOI 10.1016/j.triboint.2024.109355
In brief
“Influence of V concentration in TiAlSiVN coating on self-lubrication, friction and tool wear during two-pass dry turning of austenitic steel 316 L” is a 2024 journal article by Ch Sateesh Kumar and 4 co-authors, published in Tribology International. OpenAlex counts 23 citations as of 17 November 2026, which puts it in the top 2% of works published in 2024 by citations. It is open access under a CC BY-NC licence: the full text is free to read at Tribology International.
- Citations
- 23
- Most cited in
- 2025 (8)
- Field-weighted impact
- 2.93
- References
- 42
- Authors
- 5
Abstract
The present work investigates the performance of TiAlSiVN coating with 5 and 11 at% of V concentration deposited on the Al2O3/SiC cutting tools during dry turning of austenitic 316 L stainless steel. The maximum flank wear reduction compared to the uncoated tool for coated tools with 11% and 5% V concentration was 85% and 67%, respectively. The Raman analysis indicated the formation of V2O5 in the cutting zone, which helps to reduce friction and machining forces for the coated tools. Overall, the presence of higher V content (11 at.%) enhances the self-lubrication behaviour of the TiAlSiVN coating, accounting to lower fluctuations in cutting forces, superior surface finish, and lower flank wear when compared to the TiAlSiV5N coated and uncoated cutting tools.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Kumar, C. S., Urbikaín, G., Fernandes, F., AL-Rjoub, A., & de Lacalle, L. N. L. (2024). Influence of V concentration in TiAlSiVN coating on self-lubrication, friction and tool wear during two-pass dry turning of austenitic steel 316 L. Tribology International, 193, 109355. https://doi.org/10.1016/j.triboint.2024.109355
MLA 9
Kumar, Ch Sateesh, et al. “Influence of V concentration in TiAlSiVN coating on self-lubrication, friction and tool wear during two-pass dry turning of austenitic steel 316 L.” Tribology International, vol. 193, 2024, p. 109355. https://doi.org/10.1016/j.triboint.2024.109355.
Chicago
Kumar, Ch Sateesh, Gorka Urbikaín, Filipe Fernandes, A. AL-Rjoub, and Luís Norberto López de Lacalle. 2024. “Influence of V concentration in TiAlSiVN coating on self-lubrication, friction and tool wear during two-pass dry turning of austenitic steel 316 L.” Tribology International 193: 109355. https://doi.org/10.1016/j.triboint.2024.109355.
Harvard
Kumar, C. S. et al. (2024) ‘Influence of V concentration in TiAlSiVN coating on self-lubrication, friction and tool wear during two-pass dry turning of austenitic steel 316 L’, Tribology International, 193, p. 109355. doi:10.1016/j.triboint.2024.109355.
IEEE
C. S. Kumar, G. Urbikaín, F. Fernandes, A. AL-Rjoub, and L. N. L. de Lacalle, “Influence of V concentration in TiAlSiVN coating on self-lubrication, friction and tool wear during two-pass dry turning of austenitic steel 316 L,” Tribology International, vol. 193, p. 109355, 2024, doi: 10.1016/j.triboint.2024.109355.
BibTeX
@article{kumar2024influence,
title = {{Influence of V concentration in TiAlSiVN coating on self-lubrication, friction and tool wear during two-pass dry turning of austenitic steel 316 L}},
author = {Kumar, Ch Sateesh and Urbikaín, Gorka and Fernandes, Filipe and AL-Rjoub, A. and de Lacalle, Luís Norberto López},
journal = {Tribology International},
year = {2024},
volume = {193},
pages = {109355},
doi = {10.1016/j.triboint.2024.109355},
url = {https://doi.org/10.1016/j.triboint.2024.109355}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2024 | 7 | |
| 2025 | 8 | |
| 2026 | 8 |
Its field-weighted citation impact is 2.93: it has been cited 2.93 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- vanadium content
- self-lubrication
- friction
- tool wear
- dry turning
- austenitic stainless steel 316L
- flank wear
- cutting force
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Kumar, C. S., Urbikaín, G., Fernandes, F., AL-Rjoub, A., & de Lacalle, L. N. L. (2024). Influence of V concentration in TiAlSiVN coating on self-lubrication, friction and tool wear during two-pass dry turning of austenitic steel 316 L. Tribology International, 193, 109355. https://doi.org/10.1016/j.triboint.2024.109355
How many times has this paper been cited?
23 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Tribology International: sign in and open the full text from this page.
Who wrote this paper?
Ch Sateesh Kumar, Gorka Urbikaín, Filipe Fernandes, A. AL-Rjoub, Luís Norberto López de Lacalle.
What is the DOI of this paper?
10.1016/j.triboint.2024.109355, permanently at https://doi.org/10.1016/j.triboint.2024.109355. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.