Journal article · 2025 · Open access

Performance evaluation of TiAlSiN and TiSiN/TiSiVN coatings during high-speed dry turning of AISI 316 L considering the role of vanadium-based tribo-oxides

Ch Sateesh Kumar, Luís Norberto López de Lacalle, A. Cavaleiro, Diogo Cavaleiro, Mitjan Kalin, Ramanand Prajapati, Filipe Fernandes

Surface and Coatings Technology, 516, 132774 · Published 8 October 2025 · DOI 10.1016/j.surfcoat.2025.132774

Open full textCite this paper

In brief

“Performance evaluation of TiAlSiN and TiSiN/TiSiVN coatings during high-speed dry turning of AISI 316 L considering the role of vanadium-based tribo-oxides” is a 2025 journal article by Ch Sateesh Kumar and 6 co-authors, published in Surface and Coatings Technology. OpenAlex counts 8 citations as of 17 November 2026, which puts it in the top 2% of works published in 2025 by citations. It is open access under a CC BY-NC-ND licence: the full text is free to read at Surface and Coatings Technology.

Citations
8
Most cited in
2026 (8)
Field-weighted impact
1.83
References
50
Authors
7

Abstract

This study investigates the tribo-mechanical performance of uncoated, TiAlSiN-coated, and TiSiN/TiSiVN multilayer-coated Al 2 O 3 /SiC ceramic tools during dry turning of AISI 316 L austenitic steel across three successive passes at varying cutting speeds. Key machining outputs, including cutting forces, surface roughness, cutting temperature, and tool wear (flank and crater), were analyzed with a focus on oxide formation and self-lubricating mechanisms. The TiSiN/TiSiVN-coated tool exhibited the most favorable performance, showing only ∼15 % increase in cutting force across passes, ∼9 % improvement in flank wear resistance compared to TiAlSiN, and ∼ 17 % lower wear progression relative to the uncoated tool at 350 m/min. Surface roughness and cutting temperature trends further confirmed the coating's superiority, attributed to the formation of V₂O₅ tribo-oxides, which reduce friction and thermal degradation. EDS and SEM analyses validated the wear protection mechanisms, highlighting the adaptive role of vanadium-based layers in mitigating adhesion and thermal fatigue. The results establish TiSiN/TiSiVN as a promising candidate for high-speed dry machining due to its superior mechanical-chemical synergy and wear resistance. • Cutting Forces progressively increased across passes for all tools; however, TiSiN/TiSiVN exhibited the lowest rise (∼15%) • TiSiN/TiSiVN displayed the smallest percentage increase (∼12%) in coefficient of friction owing to the lubricating effect of V₂O₅ films. • TiSiN/TiSiVN coated tool accounted to ∼30% lower Ra values compared to the uncoated tool • TiSiN/TiSiVN maintained thermal control with ∼20–25% lower temperature rise due to oxide barrier layers.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Kumar, C. S., de Lacalle, L. N. L., Cavaleiro, A., Cavaleiro, D., Kalin, M., Prajapati, R., & Fernandes, F. (2025). Performance evaluation of TiAlSiN and TiSiN/TiSiVN coatings during high-speed dry turning of AISI 316 L considering the role of vanadium-based tribo-oxides. Surface and Coatings Technology, 516, 132774. https://doi.org/10.1016/j.surfcoat.2025.132774

MLA 9

Kumar, Ch Sateesh, et al. “Performance evaluation of TiAlSiN and TiSiN/TiSiVN coatings during high-speed dry turning of AISI 316 L considering the role of vanadium-based tribo-oxides.” Surface and Coatings Technology, vol. 516, 2025, p. 132774. https://doi.org/10.1016/j.surfcoat.2025.132774.

Chicago

Kumar, Ch Sateesh, Luís Norberto López de Lacalle, A. Cavaleiro, Diogo Cavaleiro, Mitjan Kalin, Ramanand Prajapati, and Filipe Fernandes. 2025. “Performance evaluation of TiAlSiN and TiSiN/TiSiVN coatings during high-speed dry turning of AISI 316 L considering the role of vanadium-based tribo-oxides.” Surface and Coatings Technology 516: 132774. https://doi.org/10.1016/j.surfcoat.2025.132774.

Harvard

Kumar, C. S. et al. (2025) ‘Performance evaluation of TiAlSiN and TiSiN/TiSiVN coatings during high-speed dry turning of AISI 316 L considering the role of vanadium-based tribo-oxides’, Surface and Coatings Technology, 516, p. 132774. doi:10.1016/j.surfcoat.2025.132774.

IEEE

C. S. Kumar et al., “Performance evaluation of TiAlSiN and TiSiN/TiSiVN coatings during high-speed dry turning of AISI 316 L considering the role of vanadium-based tribo-oxides,” Surface and Coatings Technology, vol. 516, p. 132774, 2025, doi: 10.1016/j.surfcoat.2025.132774.

BibTeX

@article{kumar2025performance,
  title     = {{Performance evaluation of TiAlSiN and TiSiN/TiSiVN coatings during high-speed dry turning of AISI 316 L considering the role of vanadium-based tribo-oxides}},
  author    = {Kumar, Ch Sateesh and de Lacalle, Luís Norberto López and Cavaleiro, A. and Cavaleiro, Diogo and Kalin, Mitjan and Prajapati, Ramanand and Fernandes, Filipe},
  journal   = {Surface and Coatings Technology},
  year      = {2025},
  volume    = {516},
  pages     = {132774},
  doi       = {10.1016/j.surfcoat.2025.132774},
  url       = {https://doi.org/10.1016/j.surfcoat.2025.132774}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization

  • TiAlSiN coating
  • 316L stainless steel
  • cutting force
  • surface roughness
  • cutting temperature
  • tool wear
  • flank wear
  • crater wear

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Kumar, C. S., de Lacalle, L. N. L., Cavaleiro, A., Cavaleiro, D., Kalin, M., Prajapati, R., & Fernandes, F. (2025). Performance evaluation of TiAlSiN and TiSiN/TiSiVN coatings during high-speed dry turning of AISI 316 L considering the role of vanadium-based tribo-oxides. Surface and Coatings Technology, 516, 132774. https://doi.org/10.1016/j.surfcoat.2025.132774

How many times has this paper been cited?

8 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Surface and Coatings Technology: sign in and open the full text from this page.

Who wrote this paper?

Ch Sateesh Kumar, Luís Norberto López de Lacalle, A. Cavaleiro, Diogo Cavaleiro, Mitjan Kalin, Ramanand Prajapati, Filipe Fernandes.

What is the DOI of this paper?

10.1016/j.surfcoat.2025.132774, permanently at https://doi.org/10.1016/j.surfcoat.2025.132774. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.