Journal article · 2023 · Open access

Investigating the self-lubricating properties of novel TiSiVN coating during dry turning of Ti6Al4V alloy

Ch Sateesh Kumar, Gorka Urbikaín, Pablo Fernández-Lucio, Luís Norberto López de Lacalle, Cristian Pérez-Salinas, S. Gangopadhyay, Filipe Fernandes

Wear, 532-533, 205095 · Published 14 August 2023 · DOI 10.1016/j.wear.2023.205095

Open full textCite this paper

In brief

“Investigating the self-lubricating properties of novel TiSiVN coating during dry turning of Ti6Al4V alloy” is a 2023 journal article by Ch Sateesh Kumar and 6 co-authors, published in Wear. OpenAlex counts 33 citations as of 17 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at Wear.

Citations
33
Most cited in
2024 (13)
Field-weighted impact
2.77
References
38
Authors
7

Abstract

The machining of titanium alloys like Ti6Al4V has been challenging owing to their low thermal conductivity, making them highly difficult-to-cut. Many techniques have been adopted to improve machinability of Ti6Al4V titanium alloy and the durability of the cutting tools during its machining. Thus, to improve their machinability, the current work investigates the applicability of TiSiVN self-lubricating coating deposited on Al2O3–SiC ceramic cutting tools during continuous turning of Ti6Al4V alloy under dry cutting environment. The TiSiVN coating accounted for lower surface roughness and cutting temperatures under all conditions. Due to the formation of V2O5 at high temperatures that were observed during oxidation and machining tests in EDS and Raman spectroscopy, the TiSiVN coating helped in reducing friction and, thus, retained the crater wear area. In contrast, the worn area on the crater surface reduced for uncoated and TiSiN coated cutting tools due to a significant increase in nose depth decrement with increasing cutting speed. Furthermore, increased nose depth decrement resulted in the drop of machining forces when using TiSiN coated and uncoated cutting tools. However, the coating delamination due to oxidation was apparent which reduced the effectiveness of lubricious phases present in the cutting zone for TiSiVN coated tool.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Kumar, C. S., Urbikaín, G., Fernández-Lucio, P., de Lacalle, L. N. L., Pérez-Salinas, C., Gangopadhyay, S., & Fernandes, F. (2023). Investigating the self-lubricating properties of novel TiSiVN coating during dry turning of Ti6Al4V alloy. Wear, 532-533, 205095. https://doi.org/10.1016/j.wear.2023.205095

MLA 9

Kumar, Ch Sateesh, et al. “Investigating the self-lubricating properties of novel TiSiVN coating during dry turning of Ti6Al4V alloy.” Wear, vol. 532-533, 2023, p. 205095. https://doi.org/10.1016/j.wear.2023.205095.

Chicago

Kumar, Ch Sateesh, Gorka Urbikaín, Pablo Fernández-Lucio, Luís Norberto López de Lacalle, Cristian Pérez-Salinas, S. Gangopadhyay, and Filipe Fernandes. 2023. “Investigating the self-lubricating properties of novel TiSiVN coating during dry turning of Ti6Al4V alloy.” Wear 532-533: 205095. https://doi.org/10.1016/j.wear.2023.205095.

Harvard

Kumar, C. S. et al. (2023) ‘Investigating the self-lubricating properties of novel TiSiVN coating during dry turning of Ti6Al4V alloy’, Wear, 532-533, p. 205095. doi:10.1016/j.wear.2023.205095.

IEEE

C. S. Kumar et al., “Investigating the self-lubricating properties of novel TiSiVN coating during dry turning of Ti6Al4V alloy,” Wear, vol. 532-533, p. 205095, 2023, doi: 10.1016/j.wear.2023.205095.

BibTeX

@article{kumar2023investigating,
  title     = {{Investigating the self-lubricating properties of novel TiSiVN coating during dry turning of Ti6Al4V alloy}},
  author    = {Kumar, Ch Sateesh and Urbikaín, Gorka and Fernández-Lucio, Pablo and de Lacalle, Luís Norberto López and Pérez-Salinas, Cristian and Gangopadhyay, S. and Fernandes, Filipe},
  journal   = {Wear},
  year      = {2023},
  volume    = {532-533},
  pages     = {205095},
  doi       = {10.1016/j.wear.2023.205095},
  url       = {https://doi.org/10.1016/j.wear.2023.205095}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202311
20241313
202588
20261111

Its field-weighted citation impact is 2.77: it has been cited 2.77 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization

  • self-lubricating coatings
  • Ti-6Al-4V
  • titanium alloy machining
  • dry turning
  • machinability
  • cutting temperature
  • surface roughness
  • coating oxidation

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Kumar, C. S., Urbikaín, G., Fernández-Lucio, P., de Lacalle, L. N. L., Pérez-Salinas, C., Gangopadhyay, S., & Fernandes, F. (2023). Investigating the self-lubricating properties of novel TiSiVN coating during dry turning of Ti6Al4V alloy. Wear, 532-533, 205095. https://doi.org/10.1016/j.wear.2023.205095

How many times has this paper been cited?

33 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Wear: sign in and open the full text from this page.

Who wrote this paper?

Ch Sateesh Kumar, Gorka Urbikaín, Pablo Fernández-Lucio, Luís Norberto López de Lacalle, Cristian Pérez-Salinas, S. Gangopadhyay, Filipe Fernandes.

What is the DOI of this paper?

10.1016/j.wear.2023.205095, permanently at https://doi.org/10.1016/j.wear.2023.205095. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.