Journal article · 2026 · Open access
Influence of vanadium on wear suppression in TiAlSiVxN-coated ceramic tools during dry turning of 42CrMo4 steel
Tribology International, 226, 112717 · Published 17 September 2026 · DOI 10.1016/j.triboint.2026.112717
In brief
“Influence of vanadium on wear suppression in TiAlSiVxN-coated ceramic tools during dry turning of 42CrMo4 steel” is a 2026 journal article by Ch Sateesh Kumar and 4 co-authors, published in Tribology International. OpenAlex counts 0 citations as of 17 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at Tribology International.
- Citations
- 0
- References
- 46
- Authors
- 5
Abstract
Crater wear is one of the dominant failure mechanisms limiting the performance of ceramic cutting tools during high-speed dry machining. In this study, the effect of vanadium incorporation into TiAlSiN coatings on the evolution of crater wear during dry turning of 42CrMo4 steel was investigated. TiAlSiN, TiAlSiV4N and TiAlSiV11N coatings were deposited on Al₂O₃/SiC whisker-reinforced ceramic inserts by reactive DC magnetron sputtering and evaluated under different cutting speeds and feed rates. Crater wear was characterized using three-dimensional optical profilometry, while infrared thermography, Raman spectroscopy and energy-dispersive X-ray spectroscopy were used to investigate the thermal and tribochemical response of the rake-face contact. TiAlSiV11N exhibited the best overall machining performance, reducing the principal crater-wear parameters by approximately 30–50% compared with the uncoated tool while lowering the measured cutting temperature by approximately 8–12%. Cutting-length-dependent measurements further showed a slower progression of crater volume for the V-containing coatings. Raman spectroscopy confirmed the formation of V₂O₅ together with Fe₂O₃, Cr₂O₃, TiO₂, Al₂O₃ and SiO₂. Fe and O concentrations showed a strong dependence on cutting temperature, with comparable values at similar temperatures irrespective of coating composition, indicating that thermal loading is the dominant factor governing material transfer and oxidation. The superior performance of TiAlSiV11N is therefore attributed to the combined influence of improved coating adhesion, modified mechanical and oxidation behaviour, reduced thermal loading and V-induced tribochemical reactions. These results provide experimental support for a coupled thermo-tribochemical interpretation of wear suppression in TiAlSiVxN-coated ceramic tools.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Kumar, C. S., Cavaleiro, A., Kalin, M., Gangopadhyay, S., & Fernandes, F. (2026). Influence of vanadium on wear suppression in TiAlSiVxN-coated ceramic tools during dry turning of 42CrMo4 steel. Tribology International, 226, 112717. https://doi.org/10.1016/j.triboint.2026.112717
MLA 9
Kumar, Ch Sateesh, et al. “Influence of vanadium on wear suppression in TiAlSiVxN-coated ceramic tools during dry turning of 42CrMo4 steel.” Tribology International, vol. 226, 2026, p. 112717. https://doi.org/10.1016/j.triboint.2026.112717.
Chicago
Kumar, Ch Sateesh, A. Cavaleiro, Mitjan Kalin, S. Gangopadhyay, and Filipe Fernandes. 2026. “Influence of vanadium on wear suppression in TiAlSiVxN-coated ceramic tools during dry turning of 42CrMo4 steel.” Tribology International 226: 112717. https://doi.org/10.1016/j.triboint.2026.112717.
Harvard
Kumar, C. S. et al. (2026) ‘Influence of vanadium on wear suppression in TiAlSiVxN-coated ceramic tools during dry turning of 42CrMo4 steel’, Tribology International, 226, p. 112717. doi:10.1016/j.triboint.2026.112717.
IEEE
C. S. Kumar, A. Cavaleiro, M. Kalin, S. Gangopadhyay, and F. Fernandes, “Influence of vanadium on wear suppression in TiAlSiVxN-coated ceramic tools during dry turning of 42CrMo4 steel,” Tribology International, vol. 226, p. 112717, 2026, doi: 10.1016/j.triboint.2026.112717.
BibTeX
@article{kumar2026influence,
title = {{Influence of vanadium on wear suppression in TiAlSiVxN-coated ceramic tools during dry turning of 42CrMo4 steel}},
author = {Kumar, Ch Sateesh and Cavaleiro, A. and Kalin, Mitjan and Gangopadhyay, S. and Fernandes, Filipe},
journal = {Tribology International},
year = {2026},
volume = {226},
pages = {112717},
doi = {10.1016/j.triboint.2026.112717},
url = {https://doi.org/10.1016/j.triboint.2026.112717}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- vanadium
- TiAlSiN coating
- ceramic cutting tools
- dry turning
- 42CrMo4 steel
- crater wear
- reactive DC magnetron sputtering
- cutting temperature
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Kumar, C. S., Cavaleiro, A., Kalin, M., Gangopadhyay, S., & Fernandes, F. (2026). Influence of vanadium on wear suppression in TiAlSiVxN-coated ceramic tools during dry turning of 42CrMo4 steel. Tribology International, 226, 112717. https://doi.org/10.1016/j.triboint.2026.112717
How many times has this paper been cited?
0 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Tribology International: sign in and open the full text from this page.
Who wrote this paper?
Ch Sateesh Kumar, A. Cavaleiro, Mitjan Kalin, S. Gangopadhyay, Filipe Fernandes.
What is the DOI of this paper?
10.1016/j.triboint.2026.112717, permanently at https://doi.org/10.1016/j.triboint.2026.112717. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.