Journal article · 2022 · Open access

Tribological properties of TiSiVN coatings: The effect of the counterpart on the wear performance

Filipe Fernandes, A. AL-Rjoub, Talha Bin Yaqub, Fábio Ferreira, R. Serra, A. Cavaleiro

Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, 239(3), 1056–1062 · Published 8 August 2022 · DOI 10.1177/09544089221118468

Open full textView at the publisherCite this paper

In brief

“Tribological properties of TiSiVN coatings: The effect of the counterpart on the wear performance” is a 2022 journal article by Filipe Fernandes and 5 co-authors, published in Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering. OpenAlex counts 0 citations as of 17 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT).

Citations
0
References
17
Authors
6

Abstract

Self-lubricant coatings are a subject of continual research and improvements. In this research, the tribological performance of TiSiVN coatings produced by increasing V concentration is evaluated. The coatings were deposited by high-power impulse magnetron sputtering in deep oscillation mode, and were tested against three different counterparts (Al 2 O 3 , stainless steel and Titanium). The wear mechanisms were identified and the tribolayer was characterized to correlate with different specific wear rates and friction coefficient values. The coatings tested against Al 2 O 3 balls displays a polishing type wear mechanism with some material adhered to the film wear track surface. When V is added to the reference film, V-O formed on the wear track has a beneficial influence by decreasing the friction and the wear of the coatings. For stainless steel balls, the wear track displays a mixture of severe abrasion and adhesion wear. Enclosure of hard particles at the softer stainless steel ball is the cause for the severe abrasion of the coating surface. This harsh abrasion removes the V-O from the contact and consequently decreases the efficiency of reducing friction coefficient and wear when compared to the tests against Al 2 O 3 balls. For tests conducted against Ti ball, a strong adhesion of the material to the counterpart is observed. The adhered material protects the coatings from wear by giving rise to similar friction coefficient values irrespective of the coatings’ chemical composition.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Fernandes, F., AL-Rjoub, A., Bin Yaqub, T., Ferreira, F., Serra, R., & Cavaleiro, A. (2022). Tribological properties of TiSiVN coatings: The effect of the counterpart on the wear performance. Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, 239(3), 1056–1062. https://doi.org/10.1177/09544089221118468

MLA 9

Fernandes, Filipe, et al. “Tribological properties of TiSiVN coatings: The effect of the counterpart on the wear performance.” Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, vol. 239, no. 3, 2022, pp. 1056–1062. https://doi.org/10.1177/09544089221118468.

Chicago

Fernandes, Filipe, A. AL-Rjoub, Talha Bin Yaqub, Fábio Ferreira, R. Serra, and A. Cavaleiro. 2022. “Tribological properties of TiSiVN coatings: The effect of the counterpart on the wear performance.” Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering 239 (3): 1056–1062. https://doi.org/10.1177/09544089221118468.

Harvard

Fernandes, F. et al. (2022) ‘Tribological properties of TiSiVN coatings: The effect of the counterpart on the wear performance’, Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, 239(3), pp. 1056–1062. doi:10.1177/09544089221118468.

IEEE

F. Fernandes, A. AL-Rjoub, T. Bin Yaqub, F. Ferreira, R. Serra, and A. Cavaleiro, “Tribological properties of TiSiVN coatings: The effect of the counterpart on the wear performance,” Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, vol. 239, no. 3, pp. 1056–1062, 2022, doi: 10.1177/09544089221118468.

BibTeX

@article{fernandes2022tribological,
  title     = {{Tribological properties of TiSiVN coatings: The effect of the counterpart on the wear performance}},
  author    = {Fernandes, Filipe and AL-Rjoub, A. and Bin Yaqub, Talha and Ferreira, Fábio and Serra, R. and Cavaleiro, A.},
  journal   = {Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering},
  year      = {2022},
  volume    = {239},
  number    = {3},
  pages     = {1056--1062},
  doi       = {10.1177/09544089221118468},
  url       = {https://doi.org/10.1177/09544089221118468}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • self-lubricating coatings
  • tribological properties
  • wear mechanisms
  • vanadium content
  • friction coefficient
  • specific wear rate
  • abrasion
  • adhesive wear

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Fernandes, F., AL-Rjoub, A., Bin Yaqub, T., Ferreira, F., Serra, R., & Cavaleiro, A. (2022). Tribological properties of TiSiVN coatings: The effect of the counterpart on the wear performance. Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, 239(3), 1056–1062. https://doi.org/10.1177/09544089221118468

How many times has this paper been cited?

0 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT): sign in and open the full text from this page.

Who wrote this paper?

Filipe Fernandes, A. AL-Rjoub, Talha Bin Yaqub, Fábio Ferreira, R. Serra, A. Cavaleiro.

What is the DOI of this paper?

10.1177/09544089221118468, permanently at https://doi.org/10.1177/09544089221118468. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.