Conference paper · 2025 · Open access
Using an advanced simulation tool for successful conversion of reheating furnace to full oxyfuel operation
Linköping electronic conference proceedings, 211 · Published 13 January 2025 · DOI 10.3384/ecp212.031
In brief
“Using an advanced simulation tool for successful conversion of reheating furnace to full oxyfuel operation” is a 2025 conference paper by Esin Iplik and 3 co-authors, published in Linköping electronic conference proceedings. OpenAlex counts 0 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Linköping electronic conference proceedings.
- Citations
- 0
- References
- 5
- Authors
- 4
Abstract
Oxyfuel combustion complements decarbonization efforts by reducing the energy needs in high-temperature industries. Steel reheating furnaces are good candidates for full oxyfuel operation since this can lead to up to 30% energy savings. Linde uses an in-house tool to simulate reheating furnaces for airfuel to oxyfuel conversion. This paper follows a real customer case, starting with an airfuel simulation setup used to analyze the furnace, followed by oxyfuel simulations for burner design and energy savings estimations. These simulations lead to a successful installation of oxyfuel burners for the reheating furnace located at Ovako Imatra site. After the commissioning is completed, performance evaluation is done by comparing a reference airfuel operation period with an oxyfuel combustion period. Full oxyfuel conversion results in 27% energy savings for hot charge and high production rate periods thanks to significantly lower flue gas losses. Removing nitrogen from the oxidizer decreases the flue gas volume, reducing the total heat capacity of the off-gas stream. The savings are around 30% for cold charge and average production rate periods.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Iplik, E., Ekman, T., Bölke, K., & Kankaanpää, O. (2025). Using an advanced simulation tool for successful conversion of reheating furnace to full oxyfuel operation. Linköping electronic conference proceedings, 211. https://doi.org/10.3384/ecp212.031
MLA 9
Iplik, Esin, et al. “Using an advanced simulation tool for successful conversion of reheating furnace to full oxyfuel operation.” Linköping electronic conference proceedings, vol. 211, 2025. https://doi.org/10.3384/ecp212.031.
Chicago
Iplik, Esin, Tomas Ekman, Kristofer Bölke, and Otto Kankaanpää. 2025. “Using an advanced simulation tool for successful conversion of reheating furnace to full oxyfuel operation.” Linköping electronic conference proceedings 211. https://doi.org/10.3384/ecp212.031.
Harvard
Iplik, E. et al. (2025) ‘Using an advanced simulation tool for successful conversion of reheating furnace to full oxyfuel operation’, Linköping electronic conference proceedings, 211. doi:10.3384/ecp212.031.
IEEE
E. Iplik, T. Ekman, K. Bölke, and O. Kankaanpää, “Using an advanced simulation tool for successful conversion of reheating furnace to full oxyfuel operation,” Linköping electronic conference proceedings, vol. 211, 2025, doi: 10.3384/ecp212.031.
BibTeX
@inproceedings{iplik2025using,
title = {{Using an advanced simulation tool for successful conversion of reheating furnace to full oxyfuel operation}},
author = {Iplik, Esin and Ekman, Tomas and Bölke, Kristofer and Kankaanpää, Otto},
booktitle = {Linköping electronic conference proceedings},
year = {2025},
volume = {211},
doi = {10.3384/ecp212.031},
url = {https://doi.org/10.3384/ecp212.031}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Materials Science › Metals and Alloys › Iron and Steelmaking Processes
- oxy-fuel combustion
- steel reheating furnace
- furnace simulation
- burner design
- energy conservation
- flue gas heat loss
- decarbonization
- Linde
Work with this paper
Most-cited papers in Materials Science
- Electric Field Effect in Atomically Thin Carbon FilmsKostya S. Novoselov, Andre K. Geim, Sergey V. Morozov and 5 more · Science · 2004 · 67,474 citations
- Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenidesROBERT D. SHANNON · Acta Crystallographica Section A · 1976 · 66,944 citations
- Ab initio molecular dynamics for liquid metalsGeorg Kresse, J. Häfner · Physical review. B, Condensed matter · 1993 · 46,320 citations
- Helical microtubules of graphitic carbonSumio Iijima · Nature · 1991 · 43,639 citations
- The rise of grapheneAndre K. Geim, Kostya S. Novoselov · Nature Materials · 2007 · 40,328 citations
Questions about this paper
How do I cite this paper in APA style?
Iplik, E., Ekman, T., Bölke, K., & Kankaanpää, O. (2025). Using an advanced simulation tool for successful conversion of reheating furnace to full oxyfuel operation. Linköping electronic conference proceedings, 211. https://doi.org/10.3384/ecp212.031
How many times has this paper been cited?
0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Linköping electronic conference proceedings: sign in and open the PDF from this page.
Who wrote this paper?
Esin Iplik, Tomas Ekman, Kristofer Bölke, Otto Kankaanpää.
What is the DOI of this paper?
10.3384/ecp212.031, permanently at https://doi.org/10.3384/ecp212.031. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.