Journal article · 2026 · Open access

Numerically efficient CFD modeling for the stepwise conversion of a natural gas-air fired industrial reheating furnace to low-NOx hydrogen oxy–fuel combustion

Christian Kislinger, Georg Daurer, Stefan Schwarz, Sebastian Reichenbäck, Martin Demuth, Christian Gaber, Christoph Hochenauer

Applied Thermal Engineering, 304, 132624 · Published 7 August 2026 · DOI 10.1016/j.applthermaleng.2026.132624

Open PDFView at the publisherCite this paper

In brief

“Numerically efficient CFD modeling for the stepwise conversion of a natural gas-air fired industrial reheating furnace to low-NOx hydrogen oxy–fuel combustion” is a 2026 journal article by Christian Kislinger and 6 co-authors, published in Applied Thermal Engineering. OpenAlex counts 0 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Applied Thermal Engineering.

Citations
0
References
64
Authors
7

Abstract

This investigation presents a computationally efficient modeling strategy for partial hydrogen oxy–fuel conversion in natural gas-fired furnaces, combining RANS simulations with a Reactor Network Model for detailed chemistry post-processing. The approach was first validated against comprehensive experimental data from a semi-industrial furnace equipped with a staged low-NO x oxy–fuel burner and a natural gas–air burner. Validation included gas temperature distributions, heat-transfer rate and flue gas composition measurements, as well as OH ∗ chemiluminescence imaging for main reaction zone characterization. The model demonstrated high accuracy, with gas temperature deviations within ± 22 K, heat-transfer rate predictions to cooling lances within 3.3%, and excellent agreement in major species concentrations. Reduction of the turbulent Schmidt number was found essential to correctly capture near-burner mixing, while neglecting TCI for minor species was adequate for the investigated operating conditions. The validated method was subsequently applied to a 15 MW industrial reheating furnace model to assess partial burner substitution by hydrogen–oxygen combustion under the operational constraints requiring preservation of the original blooms heating profile. Integration of hydrogen burners reduced fuel consumption by up to 3.8% and CO 2 emissions by up to 21%, while improving process efficiency from 71.5% to 74.1%. NO x emissions decreased with the number of integrated hydrogen burners by a maximum of 34%. Despite significant reductions in flue gas mass flow, gas temperature fields, bloom heating curves and overall heat transfer remained comparable to the original behavior. The results demonstrate that partial hydrogen oxy–fuel conversion can significantly reduce carbon emissions while maintaining furnace performance, highlighting the potential of the proposed modeling strategy for industrial applications.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Kislinger, C., Daurer, G., Schwarz, S., Reichenbäck, S., Demuth, M., Gaber, C., & Hochenauer, C. (2026). Numerically efficient CFD modeling for the stepwise conversion of a natural gas-air fired industrial reheating furnace to low-NOx hydrogen oxy–fuel combustion. Applied Thermal Engineering, 304, 132624. https://doi.org/10.1016/j.applthermaleng.2026.132624

MLA 9

Kislinger, Christian, et al. “Numerically efficient CFD modeling for the stepwise conversion of a natural gas-air fired industrial reheating furnace to low-NOx hydrogen oxy–fuel combustion.” Applied Thermal Engineering, vol. 304, 2026, p. 132624. https://doi.org/10.1016/j.applthermaleng.2026.132624.

Chicago

Kislinger, Christian, Georg Daurer, Stefan Schwarz, Sebastian Reichenbäck, Martin Demuth, Christian Gaber, and Christoph Hochenauer. 2026. “Numerically efficient CFD modeling for the stepwise conversion of a natural gas-air fired industrial reheating furnace to low-NOx hydrogen oxy–fuel combustion.” Applied Thermal Engineering 304: 132624. https://doi.org/10.1016/j.applthermaleng.2026.132624.

Harvard

Kislinger, C. et al. (2026) ‘Numerically efficient CFD modeling for the stepwise conversion of a natural gas-air fired industrial reheating furnace to low-NOx hydrogen oxy–fuel combustion’, Applied Thermal Engineering, 304, p. 132624. doi:10.1016/j.applthermaleng.2026.132624.

IEEE

C. Kislinger et al., “Numerically efficient CFD modeling for the stepwise conversion of a natural gas-air fired industrial reheating furnace to low-NOx hydrogen oxy–fuel combustion,” Applied Thermal Engineering, vol. 304, p. 132624, 2026, doi: 10.1016/j.applthermaleng.2026.132624.

BibTeX

@article{kislinger2026numerically,
  title     = {{Numerically efficient CFD modeling for the stepwise conversion of a natural gas-air fired industrial reheating furnace to low-NOx hydrogen oxy–fuel combustion}},
  author    = {Kislinger, Christian and Daurer, Georg and Schwarz, Stefan and Reichenbäck, Sebastian and Demuth, Martin and Gaber, Christian and Hochenauer, Christoph},
  journal   = {Applied Thermal Engineering},
  year      = {2026},
  volume    = {304},
  pages     = {132624},
  doi       = {10.1016/j.applthermaleng.2026.132624},
  url       = {https://doi.org/10.1016/j.applthermaleng.2026.132624}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Computational Mechanics › Combustion and flame dynamics

  • reheating furnace
  • low NOx burners
  • reactor network model
  • RANS simulation
  • OH* chemiluminescence
  • turbulent Schmidt number
  • CO2 emission reduction
  • heat transfer

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Kislinger, C., Daurer, G., Schwarz, S., Reichenbäck, S., Demuth, M., Gaber, C., & Hochenauer, C. (2026). Numerically efficient CFD modeling for the stepwise conversion of a natural gas-air fired industrial reheating furnace to low-NOx hydrogen oxy–fuel combustion. Applied Thermal Engineering, 304, 132624. https://doi.org/10.1016/j.applthermaleng.2026.132624

How many times has this paper been cited?

0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Applied Thermal Engineering: sign in and open the PDF from this page.

Who wrote this paper?

Christian Kislinger, Georg Daurer, Stefan Schwarz, Sebastian Reichenbäck, Martin Demuth, Christian Gaber, Christoph Hochenauer.

What is the DOI of this paper?

10.1016/j.applthermaleng.2026.132624, permanently at https://doi.org/10.1016/j.applthermaleng.2026.132624. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.