Journal article · 2022 · Open access
Optimization of Nozzle Parameters by Investigating the Flow Behavior of Molten Steel in the Mold under a High Casting Speed
Metals, 12(10), 1595 · Published 25 September 2022 · DOI 10.3390/met12101595
In brief
“Optimization of Nozzle Parameters by Investigating the Flow Behavior of Molten Steel in the Mold under a High Casting Speed” is a 2022 journal article by Qiang Liu and 4 co-authors, published in Metals. OpenAlex counts 4 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Metals.
- Citations
- 4
- Most cited in
- 2026 (2)
- Field-weighted impact
- 0.17
- References
- 27
- Authors
- 5
Abstract
A reasonable flow field in the continuous casting mold is beneficial to produce high quality billets, and the design of the nozzle parameters of the mold is key to regulating the flow behavior of molten steel. Through combining the numerical simulation and physical experiments and taking SEN immersion depth and inner diameter as indicators, the flow behavior of molten steel in the mold during high-speed casting of a 160 mm × 160 mm billet was investigated in detail, and the nozzle parameters were optimized. The results demonstrate that, compared with the inner diameter of the nozzle, the immersion depth has a significant influence on the impact depth of molten steel. On the premise of ensuring that the velocity distribution of molten steel on the surface of the mold is uniform and the impact range inside is appropriate, the inlet immersion depth after optimization is 100–120 mm and the inner diameter is 40 mm. The corresponding impact depth is 605–665 mm, and the maximum velocity of molten steel on the mold surface is between 0.04 and 0.045 m/s. Additionally, the results of the physical experiment and numerical simulation reveal that the optimized nozzle parameters can adapt well to the continuous casting process with a high casting speed.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Liu, Q., Du, Y., Xu, P., Chen, D., & Long, M. (2022). Optimization of Nozzle Parameters by Investigating the Flow Behavior of Molten Steel in the Mold under a High Casting Speed. Metals, 12(10), 1595. https://doi.org/10.3390/met12101595
MLA 9
Liu, Qiang, et al. “Optimization of Nozzle Parameters by Investigating the Flow Behavior of Molten Steel in the Mold under a High Casting Speed.” Metals, vol. 12, no. 10, 2022, p. 1595. https://doi.org/10.3390/met12101595.
Chicago
Liu, Qiang, Yizhe Du, Peilong Xu, Dengfu Chen, and Mujun Long. 2022. “Optimization of Nozzle Parameters by Investigating the Flow Behavior of Molten Steel in the Mold under a High Casting Speed.” Metals 12 (10): 1595. https://doi.org/10.3390/met12101595.
Harvard
Liu, Q. et al. (2022) ‘Optimization of Nozzle Parameters by Investigating the Flow Behavior of Molten Steel in the Mold under a High Casting Speed’, Metals, 12(10), p. 1595. doi:10.3390/met12101595.
IEEE
Q. Liu, Y. Du, P. Xu, D. Chen, and M. Long, “Optimization of Nozzle Parameters by Investigating the Flow Behavior of Molten Steel in the Mold under a High Casting Speed,” Metals, vol. 12, no. 10, p. 1595, 2022, doi: 10.3390/met12101595.
BibTeX
@article{liu2022optimization,
title = {{Optimization of Nozzle Parameters by Investigating the Flow Behavior of Molten Steel in the Mold under a High Casting Speed}},
author = {Liu, Qiang and Du, Yizhe and Xu, Peilong and Chen, Dengfu and Long, Mujun},
journal = {Metals},
year = {2022},
volume = {12},
number = {10},
pages = {1595},
doi = {10.3390/met12101595},
url = {https://doi.org/10.3390/met12101595}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2023 | 1 | |
| 2025 | 1 | |
| 2026 | 2 |
Its field-weighted citation impact is 0.17: it has been cited 0.17 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Materials Science › Metals and Alloys › Metallurgical Processes and Thermodynamics
- continuous casting mold
- submergence depth
- impact depth
- mold flow field
- billet quality
- surface velocity distribution
Work with this paper
Most-cited papers in Materials Science
- Electric Field Effect in Atomically Thin Carbon FilmsKostya S. Novoselov, Andre K. Geim, Sergey V. Morozov and 5 more · Science · 2004 · 67,474 citations
- Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenidesROBERT D. SHANNON · Acta Crystallographica Section A · 1976 · 66,944 citations
- Ab initio molecular dynamics for liquid metalsGeorg Kresse, J. Häfner · Physical review. B, Condensed matter · 1993 · 46,320 citations
- Helical microtubules of graphitic carbonSumio Iijima · Nature · 1991 · 43,639 citations
- The rise of grapheneAndre K. Geim, Kostya S. Novoselov · Nature Materials · 2007 · 40,328 citations
Questions about this paper
How do I cite this paper in APA style?
Liu, Q., Du, Y., Xu, P., Chen, D., & Long, M. (2022). Optimization of Nozzle Parameters by Investigating the Flow Behavior of Molten Steel in the Mold under a High Casting Speed. Metals, 12(10), 1595. https://doi.org/10.3390/met12101595
How many times has this paper been cited?
4 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Metals: sign in and open the PDF from this page.
Who wrote this paper?
Qiang Liu, Yizhe Du, Peilong Xu, Dengfu Chen, Mujun Long.
What is the DOI of this paper?
10.3390/met12101595, permanently at https://doi.org/10.3390/met12101595. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.