Journal article · 2023 · Open access

Numerical Simulation of the Flow Field in an Ultrahigh-Speed Continuous Casting Billet Mold

Dejin Qiu, Zhaohui Zhang, Xintao Li, Ming Yun Lv, Xiaoyu Mi, Xiaofeng Xi

Metals, 13(5), 964 · Published 16 May 2023 · DOI 10.3390/met13050964

Open PDFView at the publisherCite this paper

In brief

“Numerical Simulation of the Flow Field in an Ultrahigh-Speed Continuous Casting Billet Mold” is a 2023 journal article by Dejin Qiu and 5 co-authors, published in Metals. OpenAlex counts 9 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Metals.

Citations
9
Most cited in
2025 (5)
Field-weighted impact
0.73
References
31
Authors
6

Abstract

Ultrahigh-speed continuous casting is a critical element in achieving high-efficiency continuous casting. In the present work, a three-dimensional model of a 160 mm × 160 mm billet ultrahigh-speed continuous casting mold was developed for use in studying the influences of different casting parameters on molten steel flow. The results showed that the flow pattern in the mold was not associated with its casting speeds, submerged entry nozzle (SEN) immersion depths, or inner diameters. Variation in casting speeds significantly affected the liquid level of the steel–slag interface. Its liquid level fluctuation was reasonable at an SEN immersion depth of 80 mm. Its impact depth reached the shallowest point, which was conducive to upward movement within high-velocity and high-temperature regions, and accelerated the floating of non-metallic inclusions. Expanding the inner diameter of the SEN could effectively weaken the initial kinetic energy of the jet. However, it may cause a deeper impact depth and a degree of upward movement in the raceway, which exhibited the shallowest impact depth in the jet and the most reasonable behavior of molten steel at a liquid level for which the inner diameter of the SEN was 40 mm.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Qiu, D., Zhang, Z., Li, X., Lv, M. Y., Mi, X., & Xi, X. (2023). Numerical Simulation of the Flow Field in an Ultrahigh-Speed Continuous Casting Billet Mold. Metals, 13(5), 964. https://doi.org/10.3390/met13050964

MLA 9

Qiu, Dejin, et al. “Numerical Simulation of the Flow Field in an Ultrahigh-Speed Continuous Casting Billet Mold.” Metals, vol. 13, no. 5, 2023, p. 964. https://doi.org/10.3390/met13050964.

Chicago

Qiu, Dejin, Zhaohui Zhang, Xintao Li, Ming Yun Lv, Xiaoyu Mi, and Xiaofeng Xi. 2023. “Numerical Simulation of the Flow Field in an Ultrahigh-Speed Continuous Casting Billet Mold.” Metals 13 (5): 964. https://doi.org/10.3390/met13050964.

Harvard

Qiu, D. et al. (2023) ‘Numerical Simulation of the Flow Field in an Ultrahigh-Speed Continuous Casting Billet Mold’, Metals, 13(5), p. 964. doi:10.3390/met13050964.

IEEE

D. Qiu, Z. Zhang, X. Li, M. Y. Lv, X. Mi, and X. Xi, “Numerical Simulation of the Flow Field in an Ultrahigh-Speed Continuous Casting Billet Mold,” Metals, vol. 13, no. 5, p. 964, 2023, doi: 10.3390/met13050964.

BibTeX

@article{qiu2023numerical,
  title     = {{Numerical Simulation of the Flow Field in an Ultrahigh-Speed Continuous Casting Billet Mold}},
  author    = {Qiu, Dejin and Zhang, Zhaohui and Li, Xintao and Lv, Ming Yun and Mi, Xiaoyu and Xi, Xiaofeng},
  journal   = {Metals},
  year      = {2023},
  volume    = {13},
  number    = {5},
  pages     = {964},
  doi       = {10.3390/met13050964},
  url       = {https://doi.org/10.3390/met13050964}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202433
202555
202611

Its field-weighted citation impact is 0.73: it has been cited 0.73 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Metals and Alloys › Metallurgical Processes and Thermodynamics

  • molten steel flow
  • submerged entry nozzle
  • casting speed
  • slag-metal interface
  • non-metallic inclusions
  • flow patterns

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Qiu, D., Zhang, Z., Li, X., Lv, M. Y., Mi, X., & Xi, X. (2023). Numerical Simulation of the Flow Field in an Ultrahigh-Speed Continuous Casting Billet Mold. Metals, 13(5), 964. https://doi.org/10.3390/met13050964

How many times has this paper been cited?

9 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Metals: sign in and open the PDF from this page.

Who wrote this paper?

Dejin Qiu, Zhaohui Zhang, Xintao Li, Ming Yun Lv, Xiaoyu Mi, Xiaofeng Xi.

What is the DOI of this paper?

10.3390/met13050964, permanently at https://doi.org/10.3390/met13050964. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.