Journal article · 2022 · Open access
Research on the Influence of Process Parameters on the Flow Field in Mold
Coatings, 12(10), 1547 · Published 14 October 2022 · DOI 10.3390/coatings12101547
In brief
“Research on the Influence of Process Parameters on the Flow Field in Mold” is a 2022 journal article by Fengming Du and 4 co-authors, published in Coatings. OpenAlex counts 6 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Coatings.
- Citations
- 6
- Most cited in
- 2025 (3)
- Field-weighted impact
- 0.35
- References
- 22
- Authors
- 5
Abstract
The mold is one of the core components of steelmaking, and its flow field distribution will directly affect the quality of the casting slab. A three-dimensional nozzle model is built in this work, and fluid simulation is carried out to investigate the influence of the casting speed, immersion depth, slab thickness, and width on flow behavior in the mold. This model combined simulation with real conditions. The casting speed, immersion depth, slab width, and slab thickness are the actual process parameters used in the steel factory. The results show that when the casting speed increases from 0.6 to 1.0 m/min, the strike positions of the narrow surface are 0.439, 0.476, and 0.480 m below the liquid level, respectively. When the immersion depth increases from 180 to 220 mm, the impact depth of the stream at the exit of the nozzle side hole moves down, the lower recirculation zone moves to the centre and bottom of the slab, and the upper recirculation zone moves downward. When the slab thickness increases, the strike locations of the narrow face move down. Further, when the slab width increases, the distance of the strike location from the strike position increases first and then decreases. From the fluid results, the process parameters can be optimized by considering the strike location and the change of the surface turbulent kinetic energy. The model proposed in this work provides a theoretical guidance and optimization for the nozzle.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Du, F., Zhao, J. H., Zheng, Y., Li, T., & Zheng, G. (2022). Research on the Influence of Process Parameters on the Flow Field in Mold. Coatings, 12(10), 1547. https://doi.org/10.3390/coatings12101547
MLA 9
Du, Fengming, et al. “Research on the Influence of Process Parameters on the Flow Field in Mold.” Coatings, vol. 12, no. 10, 2022, p. 1547. https://doi.org/10.3390/coatings12101547.
Chicago
Du, Fengming, Jian Hai Zhao, Yue Zheng, Tianyi Li, and Gengtao Zheng. 2022. “Research on the Influence of Process Parameters on the Flow Field in Mold.” Coatings 12 (10): 1547. https://doi.org/10.3390/coatings12101547.
Harvard
Du, F. et al. (2022) ‘Research on the Influence of Process Parameters on the Flow Field in Mold’, Coatings, 12(10), p. 1547. doi:10.3390/coatings12101547.
IEEE
F. Du, J. H. Zhao, Y. Zheng, T. Li, and G. Zheng, “Research on the Influence of Process Parameters on the Flow Field in Mold,” Coatings, vol. 12, no. 10, p. 1547, 2022, doi: 10.3390/coatings12101547.
BibTeX
@article{du2022research,
title = {{Research on the Influence of Process Parameters on the Flow Field in Mold}},
author = {Du, Fengming and Zhao, Jian Hai and Zheng, Yue and Li, Tianyi and Zheng, Gengtao},
journal = {Coatings},
year = {2022},
volume = {12},
number = {10},
pages = {1547},
doi = {10.3390/coatings12101547},
url = {https://doi.org/10.3390/coatings12101547}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2023 | 1 | |
| 2025 | 3 | |
| 2026 | 2 |
Its field-weighted citation impact is 0.35: it has been cited 0.35 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Materials Science › Metals and Alloys › Metallurgical Processes and Thermodynamics
- continuous casting mold
- mold flow field
- casting speed
- submergence depth
- slab thickness
- slab width
- recirculation zone
- turbulent kinetic energy
Work with this paper
Most-cited papers in Materials Science
- Electric Field Effect in Atomically Thin Carbon FilmsKostya S. Novoselov, Andre K. Geim, Sergey V. Morozov and 5 more · Science · 2004 · 67,474 citations
- Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenidesROBERT D. SHANNON · Acta Crystallographica Section A · 1976 · 66,944 citations
- Ab initio molecular dynamics for liquid metalsGeorg Kresse, J. Häfner · Physical review. B, Condensed matter · 1993 · 46,320 citations
- Helical microtubules of graphitic carbonSumio Iijima · Nature · 1991 · 43,639 citations
- The rise of grapheneAndre K. Geim, Kostya S. Novoselov · Nature Materials · 2007 · 40,328 citations
Questions about this paper
How do I cite this paper in APA style?
Du, F., Zhao, J. H., Zheng, Y., Li, T., & Zheng, G. (2022). Research on the Influence of Process Parameters on the Flow Field in Mold. Coatings, 12(10), 1547. https://doi.org/10.3390/coatings12101547
How many times has this paper been cited?
6 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Coatings: sign in and open the PDF from this page.
Who wrote this paper?
Fengming Du, Jian Hai Zhao, Yue Zheng, Tianyi Li, Gengtao Zheng.
What is the DOI of this paper?
10.3390/coatings12101547, permanently at https://doi.org/10.3390/coatings12101547. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.