Journal article · 2025 · Open access
Influence of Processing Parameters on Flow Behaviour of Ultra-Large-Section Beam Blank Continuous Casting Mould
Materials, 18(2), 275 · Published 9 January 2025 · DOI 10.3390/ma18020275
In brief
“Influence of Processing Parameters on Flow Behaviour of Ultra-Large-Section Beam Blank Continuous Casting Mould” is a 2025 journal article by Yulong Deng and 6 co-authors, published in Materials. OpenAlex counts 3 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Materials.
- Citations
- 3
- Most cited in
- 2026 (2)
- Field-weighted impact
- 0.62
- References
- 32
- Authors
- 7
Abstract
The complex cross-sectional shape of oversized beam blanks and the size effect of ultra-large-section beam blanks create severe issues related to the surface and internal quality of the castings. To ensure quality and control in the production of ultra-large-section beam blanks, a numerical and physical model of molten steel flow in the three-port submerged entrance nozzle (SEN) mould, with section dimensions of 1300 × 510 × 140 mm, was established. This model was created using numerical simulations and NSGA-II genetic algorithm optimisation, and the impact of the casting speed and SEN immersion depth on the mould's flow behaviour was investigated. The results showed that a deeper SEN immersion depth resulted in, a greater impact depth of the molten steel, and the surface flow velocity decreased. Both the impact depth and the surface flow velocity of the molten steel increased with increasing casting speed. The physical simulation and numerical simulation of the molten steel flow form and flow velocity distribution in the mould were in good agreement with each other, thus verifying the accuracy of the numerical simulation. The process parameters derived from this study were all within an appropriate range, which can help to improve the quality of continuously cast beam blanks. This also provides guidance for selecting optimal parameters for actual continuous casting production processes.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Deng, Y., Deng, N., Duan, J., Li, Y., Gao, Q., Ni, W., & Peng, J. (2025). Influence of Processing Parameters on Flow Behaviour of Ultra-Large-Section Beam Blank Continuous Casting Mould. Materials, 18(2), 275. https://doi.org/10.3390/ma18020275
MLA 9
Deng, Yulong, et al. “Influence of Processing Parameters on Flow Behaviour of Ultra-Large-Section Beam Blank Continuous Casting Mould.” Materials, vol. 18, no. 2, 2025, p. 275. https://doi.org/10.3390/ma18020275.
Chicago
Deng, Yulong, Nanzhou Deng, Jintao Duan, Yibo Li, Qi Gao, Weihua Ni, and Jingquan Peng. 2025. “Influence of Processing Parameters on Flow Behaviour of Ultra-Large-Section Beam Blank Continuous Casting Mould.” Materials 18 (2): 275. https://doi.org/10.3390/ma18020275.
Harvard
Deng, Y. et al. (2025) ‘Influence of Processing Parameters on Flow Behaviour of Ultra-Large-Section Beam Blank Continuous Casting Mould’, Materials, 18(2), p. 275. doi:10.3390/ma18020275.
IEEE
Y. Deng et al., “Influence of Processing Parameters on Flow Behaviour of Ultra-Large-Section Beam Blank Continuous Casting Mould,” Materials, vol. 18, no. 2, p. 275, 2025, doi: 10.3390/ma18020275.
BibTeX
@article{deng2025influence,
title = {{Influence of Processing Parameters on Flow Behaviour of Ultra-Large-Section Beam Blank Continuous Casting Mould}},
author = {Deng, Yulong and Deng, Nanzhou and Duan, Jintao and Li, Yibo and Gao, Qi and Ni, Weihua and Peng, Jingquan},
journal = {Materials},
year = {2025},
volume = {18},
number = {2},
pages = {275},
doi = {10.3390/ma18020275},
url = {https://doi.org/10.3390/ma18020275}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Materials Science › Metals and Alloys › Metallurgical Processes and Thermodynamics
- continuous casting mold
- molten steel flow
- casting speed
- submergence depth
- velocity profiles
- impact depth
- physical simulation
- casting quality
Work with this paper
Most-cited papers in Materials Science
- Electric Field Effect in Atomically Thin Carbon FilmsKostya S. Novoselov, Andre K. Geim, Sergey V. Morozov and 5 more · Science · 2004 · 67,474 citations
- Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenidesROBERT D. SHANNON · Acta Crystallographica Section A · 1976 · 66,944 citations
- Ab initio molecular dynamics for liquid metalsGeorg Kresse, J. Häfner · Physical review. B, Condensed matter · 1993 · 46,320 citations
- Helical microtubules of graphitic carbonSumio Iijima · Nature · 1991 · 43,639 citations
- The rise of grapheneAndre K. Geim, Kostya S. Novoselov · Nature Materials · 2007 · 40,328 citations
Questions about this paper
How do I cite this paper in APA style?
Deng, Y., Deng, N., Duan, J., Li, Y., Gao, Q., Ni, W., & Peng, J. (2025). Influence of Processing Parameters on Flow Behaviour of Ultra-Large-Section Beam Blank Continuous Casting Mould. Materials, 18(2), 275. https://doi.org/10.3390/ma18020275
How many times has this paper been cited?
3 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Materials: sign in and open the PDF from this page.
Who wrote this paper?
Yulong Deng, Nanzhou Deng, Jintao Duan, Yibo Li, Qi Gao, Weihua Ni, Jingquan Peng.
What is the DOI of this paper?
10.3390/ma18020275, permanently at https://doi.org/10.3390/ma18020275. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.