Paper · 2015 · Open access
Mechanical and Tribological Properties of HiPIMS and HiTUS W-C Based Coatings
Key engineering materials, 662, 99–102 · Published 1 September 2015 · DOI 10.4028/www.scientific.net/kem.662.99
In brief
“Mechanical and Tribological Properties of HiPIMS and HiTUS W-C Based Coatings” is a 2015 paper by Petra Hviščová and 5 co-authors, published in Key engineering materials. OpenAlex counts 5 citations as of 16 November 2026. It is open access under a CC BY licence: the full text is free to read at Key engineering materials.
- Citations
- 5
- Most cited in
- 2015 (2)
- Field-weighted impact
- 0.97
- References
- 7
- Authors
- 6
Abstract
Several series of W-C based coatings were deposited by HiPIMS and HiTUS deposition technologies with different deposition parameters (power, frequency and pulse length in HiPIMS and pressure, acetylene content and RF bias in HiTUS). To investigate their effect on the hardness and tribological properties. The hardness of HiTUS coatings was up to 36 GPa and CoFs of these coatings were around 0.5, whereas the HiPIMS coatings exhibited lower hardness (18 – 20 GPa) but also lower CoFs (0.18 - 0.2).
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Hviščová, P., Kvetková, L., Lofaj, F., Novák, M., Ferdinandy, M., & Podoba, R. (2015). Mechanical and Tribological Properties of HiPIMS and HiTUS W-C Based Coatings. Key engineering materials, 662, 99–102. https://doi.org/10.4028/www.scientific.net/kem.662.99
MLA 9
Hviščová, Petra, et al. “Mechanical and Tribological Properties of HiPIMS and HiTUS W-C Based Coatings.” Key engineering materials, vol. 662, 2015, pp. 99–102. https://doi.org/10.4028/www.scientific.net/kem.662.99.
Chicago
Hviščová, Petra, Lenka Kvetková, František Lofaj, Michal Novák, Milan Ferdinandy, and Rudolf Podoba. 2015. “Mechanical and Tribological Properties of HiPIMS and HiTUS W-C Based Coatings.” Key engineering materials 662: 99–102. https://doi.org/10.4028/www.scientific.net/kem.662.99.
Harvard
Hviščová, P. et al. (2015) ‘Mechanical and Tribological Properties of HiPIMS and HiTUS W-C Based Coatings’, Key engineering materials, 662, pp. 99–102. doi:10.4028/www.scientific.net/kem.662.99.
IEEE
P. Hviščová, L. Kvetková, F. Lofaj, M. Novák, M. Ferdinandy, and R. Podoba, “Mechanical and Tribological Properties of HiPIMS and HiTUS W-C Based Coatings,” Key engineering materials, vol. 662, pp. 99–102, 2015, doi: 10.4028/www.scientific.net/kem.662.99.
BibTeX
@article{hviscova2015mechanical,
title = {{Mechanical and Tribological Properties of HiPIMS and HiTUS W-C Based Coatings}},
author = {Hviščová, Petra and Kvetková, Lenka and Lofaj, František and Novák, Michal and Ferdinandy, Milan and Podoba, Rudolf},
journal = {Key engineering materials},
year = {2015},
volume = {662},
pages = {99--102},
doi = {10.4028/www.scientific.net/kem.662.99},
url = {https://doi.org/10.4028/www.scientific.net/kem.662.99}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2015 | 2 | |
| 2016 | 2 | |
| 2021 | 1 |
Its field-weighted citation impact is 0.97: it has been cited 0.97 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- tungsten carbide coatings
- high power impulse magnetron sputtering
- coating hardness
- friction coefficient
- tribological properties
- deposition parameters
- RF bias
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Hviščová, P., Kvetková, L., Lofaj, F., Novák, M., Ferdinandy, M., & Podoba, R. (2015). Mechanical and Tribological Properties of HiPIMS and HiTUS W-C Based Coatings. Key engineering materials, 662, 99–102. https://doi.org/10.4028/www.scientific.net/kem.662.99
How many times has this paper been cited?
5 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access: read the free full text at Key engineering materials.
Who wrote this paper?
Petra Hviščová, Lenka Kvetková, František Lofaj, Michal Novák, Milan Ferdinandy, Rudolf Podoba.
What is the DOI of this paper?
10.4028/www.scientific.net/kem.662.99. The permanent link is https://doi.org/10.4028/www.scientific.net/kem.662.99.
Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.