Dissertation · 2020 · Open access

Comparison of Structure, Properties and Wear Performance of Coatings Applied by HiPIMS and CAE PVD Deposition Methods During the Machining of Difficult-to-Machine Alloys

Luca Watanabe Reolon

MacSphere (McMaster University) · Published 1 January 2020 · DOI 10.71548/25326

Read the free full textCite this paper

In brief

“Comparison of Structure, Properties and Wear Performance of Coatings Applied by HiPIMS and CAE PVD Deposition Methods During the Machining of Difficult-to-Machine Alloys” is a 2020 dissertation by Luca Watanabe Reolon, published in MacSphere (McMaster University). OpenAlex counts 0 citations as of 16 November 2026. It is open access: the full text is free to read at MacSphere (McMaster University).

Citations
0
Authors
1

Abstract

High Power Impulse Magnetron Sputtering (HiPIMS) comes as a new and promising PVD method for the development of high-performance coatings for cutting applications. This technique utilizes high energy and ionization which can produce a denser and stronger ceramic in comparison to traditional deposition techniques. Important coating characteristics that arise from this method such as enhanced hardness, adhesion, and less defects, can be applied when machining hard-to-cut materials. In this study, investigation of tool life and wear mechanisms, mechanical and physical properties of AlTiN coatings deposited on carbide tools by HiPIMS and Cathodic Arc Evaporation (CAE) were analyzed when machining Inconel 718 and Stainless Steel 304. Experimental turning tests were performed to evaluate tool life, and the wear mechanisms were analyzed by optical and scanning electron microscopy. Nanohardness, scratch test, fracture toughness and other methods were carried out to evaluate the coating properties. Impedance experiments were performed to determine the coating porosity and resistance to corrosion. The results showed that HiPIMS coating presented higher hardness, toughness to fracture and adhesion to the substrate in comparison to CAE coatings. The HiPIMS coated tool substantially improved tool life when machining Inconel. The dominant wear mechanism found was abrasion, which is induced by the presence of hard carbides. The main wear patterns observed were flank, notch, and crater wear. The tool performance of HiPIMS was found to have enhanced mechanical properties, lower porosity, and form a larger amount of tribo-oxides when machining, in comparison to CAE.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Reolon, L. W. (2020). Comparison of Structure, Properties and Wear Performance of Coatings Applied by HiPIMS and CAE PVD Deposition Methods During the Machining of Difficult-to-Machine Alloys. MacSphere (McMaster University). https://doi.org/10.71548/25326

MLA 9

Reolon, Luca Watanabe. “Comparison of Structure, Properties and Wear Performance of Coatings Applied by HiPIMS and CAE PVD Deposition Methods During the Machining of Difficult-to-Machine Alloys.” MacSphere (McMaster University), 2020. https://doi.org/10.71548/25326.

Chicago

Reolon, Luca Watanabe. 2020. “Comparison of Structure, Properties and Wear Performance of Coatings Applied by HiPIMS and CAE PVD Deposition Methods During the Machining of Difficult-to-Machine Alloys.” MacSphere (McMaster University). https://doi.org/10.71548/25326.

Harvard

Reolon, L. W. (2020) ‘Comparison of Structure, Properties and Wear Performance of Coatings Applied by HiPIMS and CAE PVD Deposition Methods During the Machining of Difficult-to-Machine Alloys’, MacSphere (McMaster University). doi:10.71548/25326.

IEEE

L. W. Reolon, “Comparison of Structure, Properties and Wear Performance of Coatings Applied by HiPIMS and CAE PVD Deposition Methods During the Machining of Difficult-to-Machine Alloys,” MacSphere (McMaster University), 2020, doi: 10.71548/25326.

BibTeX

@phdthesis{reolon2020comparison,
  title     = {{Comparison of Structure, Properties and Wear Performance of Coatings Applied by HiPIMS and CAE PVD Deposition Methods During the Machining of Difficult-to-Machine Alloys}},
  author    = {Reolon, Luca Watanabe},
  year      = {2020},
  doi       = {10.71548/25326},
  url       = {https://doi.org/10.71548/25326}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization

  • high power impulse magnetron sputtering
  • cathodic arc deposition
  • TiAlN coating
  • tool coatings
  • Inconel 718
  • 304 stainless steel
  • tool life
  • wear mechanisms

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Reolon, L. W. (2020). Comparison of Structure, Properties and Wear Performance of Coatings Applied by HiPIMS and CAE PVD Deposition Methods During the Machining of Difficult-to-Machine Alloys. MacSphere (McMaster University). https://doi.org/10.71548/25326

How many times has this paper been cited?

0 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at MacSphere (McMaster University).

Who wrote this paper?

Luca Watanabe Reolon.

What is the DOI of this paper?

10.71548/25326. The permanent link is https://doi.org/10.71548/25326.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.