Journal article · 2024 · Open access
Preparation and tribological properties of WS2 solid lubricating coating with dense structure using HiPIMS
Journal of Materials Research and Technology, 32, 530–540 · Published 29 July 2024 · DOI 10.1016/j.jmrt.2024.07.214
In brief
“Preparation and tribological properties of WS2 solid lubricating coating with dense structure using HiPIMS” is a 2024 journal article by Puyou Ying and 9 co-authors, published in Journal of Materials Research and Technology. OpenAlex counts 25 citations as of 16 November 2026, which puts it in the top 5% of works published in 2024 by citations. It is open access under a CC BY-NC-ND licence: the full text is free to read at Journal of Materials Research and Technology.
- Citations
- 25
- Most cited in
- 2025 (11)
- Field-weighted impact
- 3.24
- References
- 65
- Authors
- 10
Abstract
In this study, a dense WS2 coating was deposited via high-power impulse magnetron sputtering (HiPIMS) after solving the glow discharge problem, and it was compared with WS2 coating deposited via radio frequency (RF) sputtering. The latter showed a columnar growth, with a loose and porous microstructure. The columnar crystal growth of the former was inhibited, resulting in a more compact coating structure and a more uniform, flatter and smoother surface. Therefore, the structure and tribological properties of WS2 coating prepared via HiPIMS were investigated under different loads and frictional frequencies. Under low loads (up to 15 N), the coefficient of friction (COF) decreased with polishing wear mechanism. Under a high load of 20 N, the COF rapidly increased, the wear rate was the highest, and the wear mechanism changed from polishing to abrasive wear. At low frequencies (5 and 10 Hz), the coating had a low and stable COF, good wear resistance and the wear mechanism was abrasive wear. At high frequencies (≥15 Hz), the COF and wear rates rapidly increased and the wear mechanism changed from abrasive to adhesive wear and plastic fracture. However, the friction and wear rates were similar across different wear mechanisms.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Ying, P., Sun, H., Zhang, P., Lin, C., Yang, T., Wu, J., Huang, M., Wang, T., Lian, Z., & Levchenko, V. A. (2024). Preparation and tribological properties of WS2 solid lubricating coating with dense structure using HiPIMS. Journal of Materials Research and Technology, 32, 530–540. https://doi.org/10.1016/j.jmrt.2024.07.214
MLA 9
Ying, Puyou, et al. “Preparation and tribological properties of WS2 solid lubricating coating with dense structure using HiPIMS.” Journal of Materials Research and Technology, vol. 32, 2024, pp. 530–540. https://doi.org/10.1016/j.jmrt.2024.07.214.
Chicago
Ying, Puyou, Hanying Sun, Ping Zhang, Changhong Lin, Tao Yang, Jianbo Wu, Min Huang, Tianle Wang, Zhibiao Lian, and Vladimir A. Levchenko. 2024. “Preparation and tribological properties of WS2 solid lubricating coating with dense structure using HiPIMS.” Journal of Materials Research and Technology 32: 530–540. https://doi.org/10.1016/j.jmrt.2024.07.214.
Harvard
Ying, P. et al. (2024) ‘Preparation and tribological properties of WS2 solid lubricating coating with dense structure using HiPIMS’, Journal of Materials Research and Technology, 32, pp. 530–540. doi:10.1016/j.jmrt.2024.07.214.
IEEE
P. Ying et al., “Preparation and tribological properties of WS2 solid lubricating coating with dense structure using HiPIMS,” Journal of Materials Research and Technology, vol. 32, pp. 530–540, 2024, doi: 10.1016/j.jmrt.2024.07.214.
BibTeX
@article{ying2024preparation,
title = {{Preparation and tribological properties of WS2 solid lubricating coating with dense structure using HiPIMS}},
author = {Ying, Puyou and Sun, Hanying and Zhang, Ping and Lin, Changhong and Yang, Tao and Wu, Jianbo and Huang, Min and Wang, Tianle and Lian, Zhibiao and Levchenko, Vladimir A.},
journal = {Journal of Materials Research and Technology},
year = {2024},
volume = {32},
pages = {530--540},
doi = {10.1016/j.jmrt.2024.07.214},
url = {https://doi.org/10.1016/j.jmrt.2024.07.214}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2024 | 3 | |
| 2025 | 11 | |
| 2026 | 11 |
Its field-weighted citation impact is 3.24: it has been cited 3.24 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- tungsten disulfide
- solid lubrication
- high power impulse magnetron sputtering
- RF sputtering
- columnar crystal growth
- friction coefficient
- wear mechanisms
- abrasive wear
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Ying, P., Sun, H., Zhang, P., Lin, C., Yang, T., Wu, J., Huang, M., Wang, T., Lian, Z., & Levchenko, V. A. (2024). Preparation and tribological properties of WS2 solid lubricating coating with dense structure using HiPIMS. Journal of Materials Research and Technology, 32, 530–540. https://doi.org/10.1016/j.jmrt.2024.07.214
How many times has this paper been cited?
25 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access: read the free full text at Journal of Materials Research and Technology.
Who wrote this paper?
Puyou Ying, Hanying Sun, Ping Zhang, Changhong Lin, Tao Yang, Jianbo Wu, Min Huang, Tianle Wang, Zhibiao Lian, Vladimir A. Levchenko.
What is the DOI of this paper?
10.1016/j.jmrt.2024.07.214. The permanent link is https://doi.org/10.1016/j.jmrt.2024.07.214.
Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.