Conference paper · 2019 · Open access

Towards Adaptive Prosthetic Sockets using 3D-printed Variable-stiffness Shape-memory Structures

Afonso Pourfarzaneh, Majid Taghavi, Tim Helps, Jonathan Michael Rossiter

IEEE International Conference on Soft Robotics (RoboSoft), 410–415 · Published 1 April 2019 · DOI 10.1109/robosoft.2019.8722811

Open PDFView at the publisherCite this paper

In brief

“Towards Adaptive Prosthetic Sockets using 3D-printed Variable-stiffness Shape-memory Structures” is a 2019 conference paper by Afonso Pourfarzaneh and 3 co-authors, published in IEEE International Conference on Soft Robotics (RoboSoft). OpenAlex counts 20 citations as of 22 November 2026. It is open access: the full text is free to read at Explore Bristol Research.

Citations
20
Most cited in
2025 (5)
Field-weighted impact
3.08
References
14
Authors
4

Abstract

Many amputees experience pain and soreness due to poor fitting of their prosthetic socket, which is exacerbated by inevitable changes in volume and shape of their residual limb. This work presents an adjustable, adaptive residual-limb-fitting concept: integrating a 3D-printed variable-stiffness (VS) interface layer within the socket. We exploit the glass-transition behaviour of polylactic acid (PLA), demonstrating 3D-printed structures that can be transitioned from a rigid state to a soft state, simply by heating. This not only enables the socket to be adjusted to fit the individual's residual limb, but also allows tuning of its stiffness by changing the internal structure of theinterface layer. The mechanical properties of 3D-printed variable-stiffness structures are investigated, and the shape-memory effect of PLA is also captured to deliver 3D-printed shape-memory structures that can recover from deformation when heated.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Pourfarzaneh, A., Taghavi, M., Helps, T., & Rossiter, J. M. (2019). Towards Adaptive Prosthetic Sockets using 3D-printed Variable-stiffness Shape-memory Structures. IEEE International Conference on Soft Robotics (RoboSoft), 410–415. https://doi.org/10.1109/robosoft.2019.8722811

MLA 9

Pourfarzaneh, Afonso, et al. “Towards Adaptive Prosthetic Sockets using 3D-printed Variable-stiffness Shape-memory Structures.” IEEE International Conference on Soft Robotics (RoboSoft), 2019, pp. 410–415. https://doi.org/10.1109/robosoft.2019.8722811.

Chicago

Pourfarzaneh, Afonso, Majid Taghavi, Tim Helps, and Jonathan Michael Rossiter. 2019. “Towards Adaptive Prosthetic Sockets using 3D-printed Variable-stiffness Shape-memory Structures.” IEEE International Conference on Soft Robotics (RoboSoft): 410–415. https://doi.org/10.1109/robosoft.2019.8722811.

Harvard

Pourfarzaneh, A. et al. (2019) ‘Towards Adaptive Prosthetic Sockets using 3D-printed Variable-stiffness Shape-memory Structures’, IEEE International Conference on Soft Robotics (RoboSoft), pp. 410–415. doi:10.1109/robosoft.2019.8722811.

IEEE

A. Pourfarzaneh, M. Taghavi, T. Helps, and J. M. Rossiter, “Towards Adaptive Prosthetic Sockets using 3D-printed Variable-stiffness Shape-memory Structures,” IEEE International Conference on Soft Robotics (RoboSoft), pp. 410–415, 2019, doi: 10.1109/robosoft.2019.8722811.

BibTeX

@inproceedings{pourfarzaneh2019towards,
  title     = {{Towards Adaptive Prosthetic Sockets using 3D-printed Variable-stiffness Shape-memory Structures}},
  author    = {Pourfarzaneh, Afonso and Taghavi, Majid and Helps, Tim and Rossiter, Jonathan Michael},
  booktitle = {IEEE International Conference on Soft Robotics (RoboSoft)},
  year      = {2019},
  pages     = {410--415},
  doi       = {10.1109/robosoft.2019.8722811},
  url       = {https://doi.org/10.1109/robosoft.2019.8722811}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202011
202133
202244
202322
202422
202555
202633

Its field-weighted citation impact is 3.08: it has been cited 3.08 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Prosthetics and Rehabilitation Robotics

  • prosthetic socket
  • variable stiffness structures
  • shape memory polymers
  • polylactic acid
  • 3D printing
  • amputees
  • glass transition
  • stiffness tuning

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Pourfarzaneh, A., Taghavi, M., Helps, T., & Rossiter, J. M. (2019). Towards Adaptive Prosthetic Sockets using 3D-printed Variable-stiffness Shape-memory Structures. IEEE International Conference on Soft Robotics (RoboSoft), 410–415. https://doi.org/10.1109/robosoft.2019.8722811

How many times has this paper been cited?

20 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Explore Bristol Research: sign in and open the PDF from this page.

Who wrote this paper?

Afonso Pourfarzaneh, Majid Taghavi, Tim Helps, Jonathan Michael Rossiter.

What is the DOI of this paper?

10.1109/robosoft.2019.8722811, permanently at https://doi.org/10.1109/robosoft.2019.8722811. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.