Journal article · 2018 · Open access
3D-Printed Ready-To-Use Variable-Stiffness Structures
IEEE Robotics and Automation Letters, 3(3), 2402–2407 · Published 7 March 2018 · DOI 10.1109/lra.2018.2812917
In brief
“3D-Printed Ready-To-Use Variable-Stiffness Structures” is a 2018 journal article by Majid Taghavi and 3 co-authors, published in IEEE Robotics and Automation Letters. OpenAlex counts 45 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at IEEE Robotics and Automation Letters.
- Citations
- 45
- Most cited in
- 2025 (9)
- Field-weighted impact
- 2.53
- References
- 21
- Authors
- 4
Abstract
Various physical phenomena have been used to develop variable-stiffness (VS) materials and structures, but all have involved some elements of manual fabrication, which limits their applications. In contrast, here we show fully three-dimensional (3D) printed monolithic VS structures that can be used directly from the printer. Thermally responsive polylactic acid (PLA) and conductive graphene PLA (GPLA) are combined in-printer to deliver a new framework for the temperature-controlled 3D VS structures. The embedded GPLA acts as a heating element, and both it and the surrounding PLA can be transitioned from rigid to soft using simple Joule heating because of the glass transition behavior of PLA. The mechanical and electrical properties of printed composite VS structures are studied. The great potential of this technology is demonstrated in a prototype variable-stiffness orthotic for foot drop.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Taghavi, M., Helps, T., Huang, B., & Rossiter, J. M. (2018). 3D-Printed Ready-To-Use Variable-Stiffness Structures. IEEE Robotics and Automation Letters, 3(3), 2402–2407. https://doi.org/10.1109/lra.2018.2812917
MLA 9
Taghavi, Majid, et al. “3D-Printed Ready-To-Use Variable-Stiffness Structures.” IEEE Robotics and Automation Letters, vol. 3, no. 3, 2018, pp. 2402–2407. https://doi.org/10.1109/lra.2018.2812917.
Chicago
Taghavi, Majid, Tim Helps, Boxiong Huang, and Jonathan Michael Rossiter. 2018. “3D-Printed Ready-To-Use Variable-Stiffness Structures.” IEEE Robotics and Automation Letters 3 (3): 2402–2407. https://doi.org/10.1109/lra.2018.2812917.
Harvard
Taghavi, M. et al. (2018) ‘3D-Printed Ready-To-Use Variable-Stiffness Structures’, IEEE Robotics and Automation Letters, 3(3), pp. 2402–2407. doi:10.1109/lra.2018.2812917.
IEEE
M. Taghavi, T. Helps, B. Huang, and J. M. Rossiter, “3D-Printed Ready-To-Use Variable-Stiffness Structures,” IEEE Robotics and Automation Letters, vol. 3, no. 3, pp. 2402–2407, 2018, doi: 10.1109/lra.2018.2812917.
BibTeX
@article{taghavi2018printed,
title = {{3D-Printed Ready-To-Use Variable-Stiffness Structures}},
author = {Taghavi, Majid and Helps, Tim and Huang, Boxiong and Rossiter, Jonathan Michael},
journal = {IEEE Robotics and Automation Letters},
year = {2018},
volume = {3},
number = {3},
pages = {2402--2407},
doi = {10.1109/lra.2018.2812917},
url = {https://doi.org/10.1109/lra.2018.2812917}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2018 | 1 | |
| 2019 | 7 | |
| 2020 | 6 | |
| 2021 | 3 | |
| 2022 | 7 | |
| 2023 | 6 | |
| 2024 | 5 | |
| 2025 | 9 | |
| 2026 | 1 |
Its field-weighted citation impact is 2.53: it has been cited 2.53 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- variable stiffness structures
- 3D printing
- polylactic acid
- Joule heating
- glass transition
- temperature-responsive materials
- conductive ink
- monolithic structures
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Taghavi, M., Helps, T., Huang, B., & Rossiter, J. M. (2018). 3D-Printed Ready-To-Use Variable-Stiffness Structures. IEEE Robotics and Automation Letters, 3(3), 2402–2407. https://doi.org/10.1109/lra.2018.2812917
How many times has this paper been cited?
45 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at IEEE Robotics and Automation Letters: sign in and open the PDF from this page.
Who wrote this paper?
Majid Taghavi, Tim Helps, Boxiong Huang, Jonathan Michael Rossiter.
What is the DOI of this paper?
10.1109/lra.2018.2812917, permanently at https://doi.org/10.1109/lra.2018.2812917. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.