Journal article · 2026 · Open access

3D-Printed Volume Adjustable Socket for Above-Knee Prostheses

Federico Donadel, Ahmed Zohaib Zaidi, Arianna Menciassi, Linda Paternò

IEEE Robotics and Automation Letters, 11(4), 4673–4680 · Published 9 February 2026 · DOI 10.1109/lra.2026.3662558

Open full textCite this paper

In brief

“3D-Printed Volume Adjustable Socket for Above-Knee Prostheses” is a 2026 journal article by Federico Donadel and 3 co-authors, published in IEEE Robotics and Automation Letters. OpenAlex counts 2 citations as of 22 November 2026, which puts it in the top 6% of works published in 2026 by citations. It is open access under a CC BY licence: the full text is free to read at IEEE Robotics and Automation Letters.

Citations
2
Most cited in
2026 (2)
Field-weighted impact
2.23
References
33
Authors
4

Abstract

Traditional prosthetic sockets are rigid, passive structures that cannot accommodate daily residual limb volume fluctuations and are produced through labor-intensive processes involving environmentally and occupationally hazardous materials. This work presents a 3D-printed, volume-adjustable transfemoral socket integrating a motorized cable-driven mechanism and pressure monitoring. The design features a dual layer, concentric structure that enables uniform circumferential modulation via a BOA system, operable manually or through a DC motor. Four resistive sensors, embedded in a prosthetic liner with a magnetic suspension, provide interface pressure feedback for closed-loop control. The socket is fabricated using 3D-printed glass-filled PA12 and carbon-fiber-reinforced PEEK to optimize strength, weight, and reduce material waste by means of a more sustainable production process. Experimental validation showed that the system maintains interface pressure within the target range (70 ± 2 kPa), limits relative vertical displacement down to <6 mm under realistic tension load, and withstands static and dynamic forces up to 900 N without structural failure. This solution combines adaptive design with sustainable digital manufacturing, offering a robust foundation for next-generation wearable physical interfaces that enhance comfort and stability.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Donadel, F., Zaidi, A. Z., Menciassi, A., & Paternò, L. (2026). 3D-Printed Volume Adjustable Socket for Above-Knee Prostheses. IEEE Robotics and Automation Letters, 11(4), 4673–4680. https://doi.org/10.1109/lra.2026.3662558

MLA 9

Donadel, Federico, et al. “3D-Printed Volume Adjustable Socket for Above-Knee Prostheses.” IEEE Robotics and Automation Letters, vol. 11, no. 4, 2026, pp. 4673–4680. https://doi.org/10.1109/lra.2026.3662558.

Chicago

Donadel, Federico, Ahmed Zohaib Zaidi, Arianna Menciassi, and Linda Paternò. 2026. “3D-Printed Volume Adjustable Socket for Above-Knee Prostheses.” IEEE Robotics and Automation Letters 11 (4): 4673–4680. https://doi.org/10.1109/lra.2026.3662558.

Harvard

Donadel, F. et al. (2026) ‘3D-Printed Volume Adjustable Socket for Above-Knee Prostheses’, IEEE Robotics and Automation Letters, 11(4), pp. 4673–4680. doi:10.1109/lra.2026.3662558.

IEEE

F. Donadel, A. Z. Zaidi, A. Menciassi, and L. Paternò, “3D-Printed Volume Adjustable Socket for Above-Knee Prostheses,” IEEE Robotics and Automation Letters, vol. 11, no. 4, pp. 4673–4680, 2026, doi: 10.1109/lra.2026.3662558.

BibTeX

@article{donadel2026printed,
  title     = {{3D-Printed Volume Adjustable Socket for Above-Knee Prostheses}},
  author    = {Donadel, Federico and Zaidi, Ahmed Zohaib and Menciassi, Arianna and Paternò, Linda},
  journal   = {IEEE Robotics and Automation Letters},
  year      = {2026},
  volume    = {11},
  number    = {4},
  pages     = {4673--4680},
  doi       = {10.1109/lra.2026.3662558},
  url       = {https://doi.org/10.1109/lra.2026.3662558}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Prosthetics and Rehabilitation Robotics

  • prosthetic socket
  • transfemoral prosthesis
  • above-knee prosthesis
  • 3D printing
  • cable-driven mechanism
  • resistive sensors
  • magnetic levitation
  • feedback control

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Donadel, F., Zaidi, A. Z., Menciassi, A., & Paternò, L. (2026). 3D-Printed Volume Adjustable Socket for Above-Knee Prostheses. IEEE Robotics and Automation Letters, 11(4), 4673–4680. https://doi.org/10.1109/lra.2026.3662558

How many times has this paper been cited?

2 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at IEEE Robotics and Automation Letters: sign in and open the full text from this page.

Who wrote this paper?

Federico Donadel, Ahmed Zohaib Zaidi, Arianna Menciassi, Linda Paternò.

What is the DOI of this paper?

10.1109/lra.2026.3662558, permanently at https://doi.org/10.1109/lra.2026.3662558. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.