Journal article · 2014 · Open access

Tailored Mechanical Properties and Residual Stresses of a-C:H:W Coatings

Christoph Schmid, Harald Hetzner, Stephan Tremmel, Felix Hilpert, Karsten Durst

Advanced materials research, 996, 14–21 · Published 1 August 2014 · DOI 10.4028/www.scientific.net/amr.996.14

Open PDFView at the publisherCite this paper

In brief

“Tailored Mechanical Properties and Residual Stresses of a-C:H:W Coatings” is a 2014 journal article by Christoph Schmid and 4 co-authors, published in Advanced materials research. OpenAlex counts 3 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Advanced materials research.

Citations
3
Most cited in
2014 (1)
Field-weighted impact
0.28
References
25
Authors
5

Abstract

In this study, three different a-C:H:W coatings with predefined hardness values, ranging from 10 up to 16 GPa, were deposited by adjusting bias voltage according to a previously created regression model. For this purpose, the influence of the main process parameters of the used reactive unbalanced magnetron sputtering process on the mechanical properties of the a-C:H:W coating was investigated previously by nanoindentation. For a systematical evaluation of the single effects, parameters were varied according to a central composite design. The three coating variants of this study were investigated in terms of microstructure, mechanical properties and residual stresses. It turned out, that by the use of the regression model, a-C:H:W coatings with tailored mechanical properties can be deposited. Residual stresses were measured by means of focused ion beam milling of a double-slit geometry, which causes the internal stresses to relax, and mapping of the resultant relief strain by digital image correlation. A linear relation between the applied bias voltage and the hardness, the modulus of the coating as well as the determined relief strain was observed. Thus, residual stresses of the coatings increase disproportionately with applied bias voltage. The obtained results can be helpful for tailored coating design and further optimization of a-C:H:W coatings.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Schmid, C., Hetzner, H., Tremmel, S., Hilpert, F., & Durst, K. (2014). Tailored Mechanical Properties and Residual Stresses of a-C:H:W Coatings. Advanced materials research, 996, 14–21. https://doi.org/10.4028/www.scientific.net/amr.996.14

MLA 9

Schmid, Christoph, et al. “Tailored Mechanical Properties and Residual Stresses of a-C:H:W Coatings.” Advanced materials research, vol. 996, 2014, pp. 14–21. https://doi.org/10.4028/www.scientific.net/amr.996.14.

Chicago

Schmid, Christoph, Harald Hetzner, Stephan Tremmel, Felix Hilpert, and Karsten Durst. 2014. “Tailored Mechanical Properties and Residual Stresses of a-C:H:W Coatings.” Advanced materials research 996: 14–21. https://doi.org/10.4028/www.scientific.net/amr.996.14.

Harvard

Schmid, C. et al. (2014) ‘Tailored Mechanical Properties and Residual Stresses of a-C:H:W Coatings’, Advanced materials research, 996, pp. 14–21. doi:10.4028/www.scientific.net/amr.996.14.

IEEE

C. Schmid, H. Hetzner, S. Tremmel, F. Hilpert, and K. Durst, “Tailored Mechanical Properties and Residual Stresses of a-C:H:W Coatings,” Advanced materials research, vol. 996, pp. 14–21, 2014, doi: 10.4028/www.scientific.net/amr.996.14.

BibTeX

@article{schmid2014tailored,
  title     = {{Tailored Mechanical Properties and Residual Stresses of a-C:H:W Coatings}},
  author    = {Schmid, Christoph and Hetzner, Harald and Tremmel, Stephan and Hilpert, Felix and Durst, Karsten},
  journal   = {Advanced materials research},
  year      = {2014},
  volume    = {996},
  pages     = {14--21},
  doi       = {10.4028/www.scientific.net/amr.996.14},
  url       = {https://doi.org/10.4028/www.scientific.net/amr.996.14}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201411
202011
202111

Its field-weighted citation impact is 0.28: it has been cited 0.28 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • hydrogenated amorphous carbon
  • tungsten
  • residual stress
  • coating hardness
  • elastic modulus
  • bias voltage
  • focused ion beam milling
  • digital image correlation

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Schmid, C., Hetzner, H., Tremmel, S., Hilpert, F., & Durst, K. (2014). Tailored Mechanical Properties and Residual Stresses of a-C:H:W Coatings. Advanced materials research, 996, 14–21. https://doi.org/10.4028/www.scientific.net/amr.996.14

How many times has this paper been cited?

3 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Advanced materials research: sign in and open the PDF from this page.

Who wrote this paper?

Christoph Schmid, Harald Hetzner, Stephan Tremmel, Felix Hilpert, Karsten Durst.

What is the DOI of this paper?

10.4028/www.scientific.net/amr.996.14, permanently at https://doi.org/10.4028/www.scientific.net/amr.996.14. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.