Paper · 2015 · Open access

Nanohardness of DC Magnetron Sputtered W – C Coatings as a Function of Composition and Residual Stresses

Michal Novák, František Lofaj, Petra Hviščová, Rudolf Podoba, Marián Haršáni, Martin Sahul, Ľubomír Čaplovič

Key engineering materials, 662, 107–110 · Published 1 September 2015 · DOI 10.4028/www.scientific.net/kem.662.107

Open full textCite this paper

In brief

“Nanohardness of DC Magnetron Sputtered W – C Coatings as a Function of Composition and Residual Stresses” is a 2015 paper by Michal Novák and 6 co-authors, published in Key engineering materials. OpenAlex counts 4 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Key engineering materials.

Citations
4
Most cited in
2018 (1)
Field-weighted impact
0.24
References
9
Authors
7

Abstract

The effects of residual stresses in thin W-C based coatings were investigated with the aim to find their influence on nanohardness and indentation modulus. Ten samples of W-C based coatings were deposited on microslide glass substrates using DC magnetron sputtering at the identical deposition parameters. Their thickness was in the range from 500 to 600 nm. The residual stresses in the coatings varied from 1.5 GPa up to 4.4 GPa. Increase of residual stress caused linear increase of HITfrom 16 to 19.5 GPa. This increase was only the result of the compressive stresses. EITof the studied coatings was not sensitive to residual stresses and corresponded to 185 GPa ± 15 GPa.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Novák, M., Lofaj, F., Hviščová, P., Podoba, R., Haršáni, M., Sahul, M., & Čaplovič, Ľ. (2015). Nanohardness of DC Magnetron Sputtered W – C Coatings as a Function of Composition and Residual Stresses. Key engineering materials, 662, 107–110. https://doi.org/10.4028/www.scientific.net/kem.662.107

MLA 9

Novák, Michal, et al. “Nanohardness of DC Magnetron Sputtered W – C Coatings as a Function of Composition and Residual Stresses.” Key engineering materials, vol. 662, 2015, pp. 107–110. https://doi.org/10.4028/www.scientific.net/kem.662.107.

Chicago

Novák, Michal, František Lofaj, Petra Hviščová, Rudolf Podoba, Marián Haršáni, Martin Sahul, and Ľubomír Čaplovič. 2015. “Nanohardness of DC Magnetron Sputtered W – C Coatings as a Function of Composition and Residual Stresses.” Key engineering materials 662: 107–110. https://doi.org/10.4028/www.scientific.net/kem.662.107.

Harvard

Novák, M. et al. (2015) ‘Nanohardness of DC Magnetron Sputtered W – C Coatings as a Function of Composition and Residual Stresses’, Key engineering materials, 662, pp. 107–110. doi:10.4028/www.scientific.net/kem.662.107.

IEEE

M. Novák et al., “Nanohardness of DC Magnetron Sputtered W – C Coatings as a Function of Composition and Residual Stresses,” Key engineering materials, vol. 662, pp. 107–110, 2015, doi: 10.4028/www.scientific.net/kem.662.107.

BibTeX

@article{novak2015nanohardness,
  title     = {{Nanohardness of DC Magnetron Sputtered W – C Coatings as a Function of Composition and Residual Stresses}},
  author    = {Novák, Michal and Lofaj, František and Hviščová, Petra and Podoba, Rudolf and Haršáni, Marián and Sahul, Martin and Čaplovič, Ľubomír},
  journal   = {Key engineering materials},
  year      = {2015},
  volume    = {662},
  pages     = {107--110},
  doi       = {10.4028/www.scientific.net/kem.662.107},
  url       = {https://doi.org/10.4028/www.scientific.net/kem.662.107}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201811
202011
202111
202311

Its field-weighted citation impact is 0.24: it has been cited 0.24 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • tungsten carbide coatings
  • residual stress
  • nanohardness
  • indentation modulus
  • compressive stress
  • coating composition
  • DC magnetron sputtering
  • thin film coatings

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Novák, M., Lofaj, F., Hviščová, P., Podoba, R., Haršáni, M., Sahul, M., & Čaplovič, Ľ. (2015). Nanohardness of DC Magnetron Sputtered W – C Coatings as a Function of Composition and Residual Stresses. Key engineering materials, 662, 107–110. https://doi.org/10.4028/www.scientific.net/kem.662.107

How many times has this paper been cited?

4 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Key engineering materials: sign in and open the full text from this page.

Who wrote this paper?

Michal Novák, František Lofaj, Petra Hviščová, Rudolf Podoba, Marián Haršáni, Martin Sahul, Ľubomír Čaplovič.

What is the DOI of this paper?

10.4028/www.scientific.net/kem.662.107, permanently at https://doi.org/10.4028/www.scientific.net/kem.662.107. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.