Journal article · 2014 · Open access
Application of Taguchi Method to the Optimization of a-C:H Coatings Deposited Using Ion Beam Assisted Physical Vapor Deposition
Advances in Mechanical Engineering, 7(2) · Published 20 November 2014 · DOI 10.1155/2014/582653
In brief
“Application of Taguchi Method to the Optimization of a-C:H Coatings Deposited Using Ion Beam Assisted Physical Vapor Deposition” is a 2014 journal article by W.H. Kao and 4 co-authors, published in Advances in Mechanical Engineering. OpenAlex counts 3 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Advances in Mechanical Engineering.
- Citations
- 3
- Most cited in
- 2016 (1)
- Field-weighted impact
- 0.28
- References
- 20
- Authors
- 5
Abstract
The Taguchi design method is used to optimize the adhesion, hardness, and wear resistance properties of a-C:H coatings deposited on AISI M2 steel substrates using the ion beam assisted physical vapor deposition method. The adhesion strength of the coatings is evaluated by means of scratch tests, while the hardness is measured using a nanoindentation tester. Finally, the wear resistance is evaluated by performing cyclic ball-on-disc wear tests. The Taguchi experimental results show that the optimal deposition parameters are as follows: a substrate bias voltage of 90 V, an ion beam voltage of 1 kV, an acetylene flow rate of 21 sccm, and a working distance of 7 cm. Given these optimal processing conditions, the a-C:H coating has a critical load of 99.8 N, a hardness of 25.5 GPa, and a wear rate of 0.4 × 10 −6 mm 3 /Nm.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Kao, W., Su, Y., Horng, J., Yao, S., & Huang, H. C. (2014). Application of Taguchi Method to the Optimization of a-C:H Coatings Deposited Using Ion Beam Assisted Physical Vapor Deposition. Advances in Mechanical Engineering, 7(2). https://doi.org/10.1155/2014/582653
MLA 9
Kao, W.H., et al. “Application of Taguchi Method to the Optimization of a-C:H Coatings Deposited Using Ion Beam Assisted Physical Vapor Deposition.” Advances in Mechanical Engineering, vol. 7, no. 2, 2014. https://doi.org/10.1155/2014/582653.
Chicago
Kao, W.H., Y.L. Su, Jeng‐Haur Horng, S.H. Yao, and Hsi Chuan Huang. 2014. “Application of Taguchi Method to the Optimization of a-C:H Coatings Deposited Using Ion Beam Assisted Physical Vapor Deposition.” Advances in Mechanical Engineering 7 (2). https://doi.org/10.1155/2014/582653.
Harvard
Kao, W. et al. (2014) ‘Application of Taguchi Method to the Optimization of a-C:H Coatings Deposited Using Ion Beam Assisted Physical Vapor Deposition’, Advances in Mechanical Engineering, 7(2). doi:10.1155/2014/582653.
IEEE
W. Kao, Y. Su, J. Horng, S. Yao, and H. C. Huang, “Application of Taguchi Method to the Optimization of a-C:H Coatings Deposited Using Ion Beam Assisted Physical Vapor Deposition,” Advances in Mechanical Engineering, vol. 7, no. 2, 2014, doi: 10.1155/2014/582653.
BibTeX
@article{kao2014application,
title = {{Application of Taguchi Method to the Optimization of a-C:H Coatings Deposited Using Ion Beam Assisted Physical Vapor Deposition}},
author = {Kao, W.H. and Su, Y.L. and Horng, Jeng‐Haur and Yao, S.H. and Huang, Hsi Chuan},
journal = {Advances in Mechanical Engineering},
year = {2014},
volume = {7},
number = {2},
doi = {10.1155/2014/582653},
url = {https://doi.org/10.1155/2014/582653}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2016 | 1 | |
| 2017 | 1 | |
| 2024 | 1 |
Its field-weighted citation impact is 0.28: it has been cited 0.28 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- hydrogenated amorphous carbon
- Taguchi method
- process parameter optimization
- coating adhesion
- scratch test
- nanohardness
- wear resistance
- acetylene flow rate
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Kao, W., Su, Y., Horng, J., Yao, S., & Huang, H. C. (2014). Application of Taguchi Method to the Optimization of a-C:H Coatings Deposited Using Ion Beam Assisted Physical Vapor Deposition. Advances in Mechanical Engineering, 7(2). https://doi.org/10.1155/2014/582653
How many times has this paper been cited?
3 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Advances in Mechanical Engineering: sign in and open the full text from this page.
Who wrote this paper?
W.H. Kao, Y.L. Su, Jeng‐Haur Horng, S.H. Yao, Hsi Chuan Huang.
What is the DOI of this paper?
10.1155/2014/582653, permanently at https://doi.org/10.1155/2014/582653. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.