Journal article · 2025 · Open access

Fully 3D-printed gripper jaw with embedded sensitive sensor structures for robotic applications

Nikolai Hangst, Thomas M. Wendt, Stefan J. Rupitsch

Sensors and Actuators A Physical, 399, 117334 · Published 6 December 2025 · DOI 10.1016/j.sna.2025.117334

Open full textCite this paper

In brief

“Fully 3D-printed gripper jaw with embedded sensitive sensor structures for robotic applications” is a 2025 journal article by Nikolai Hangst and 2 co-authors, published in Sensors and Actuators A Physical. OpenAlex counts 3 citations as of 22 November 2026, which puts it in the top 4% of works published in 2025 by citations. It is open access under a CC BY licence: the full text is free to read at Sensors and Actuators A Physical.

Citations
3
Most cited in
2026 (3)
Field-weighted impact
0.81
References
35
Authors
3

Abstract

In this contribution, we present a novel, fully 3D-printed sensitive gripper jaw for high gripping forces up to 40 N. The fabrication process is based on fused layer manufacturing, in which two different materials are sequentially extruded. The gripper jaw is based on a sensor design with multiple-stacked bending beams and four sensor elements, each printed directly into one of the upper and lower bending beams. The research focuses on the sensor design of the gripper jaw, the mathematical description and simulation, the fabrication process, the electrical characterization of the sensor material, and the sensitivity behavior of the gripper jaw in terms of zero-point deviation, characteristic value deviation, linearity behavior, repeatability, and viscoelastic behavior. In addition, the gripper jaw is compared with a similarly manufactured gripper jaw with conventionally attached strain gauges, as well as with other comparable fully 3D-printed sensors to classify the sensor quality. The results demonstrate that the fully 3D-printed gripper jaw is partially suitable for sensitive and fragile components. The gripper jaw is well suited for detecting the gripping state (part gripped / not gripped).

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Hangst, N., Wendt, T. M., & Rupitsch, S. J. (2025). Fully 3D-printed gripper jaw with embedded sensitive sensor structures for robotic applications. Sensors and Actuators A Physical, 399, 117334. https://doi.org/10.1016/j.sna.2025.117334

MLA 9

Hangst, Nikolai, et al. “Fully 3D-printed gripper jaw with embedded sensitive sensor structures for robotic applications.” Sensors and Actuators A Physical, vol. 399, 2025, p. 117334. https://doi.org/10.1016/j.sna.2025.117334.

Chicago

Hangst, Nikolai, Thomas M. Wendt, and Stefan J. Rupitsch. 2025. “Fully 3D-printed gripper jaw with embedded sensitive sensor structures for robotic applications.” Sensors and Actuators A Physical 399: 117334. https://doi.org/10.1016/j.sna.2025.117334.

Harvard

Hangst, N., Wendt, T. M. and Rupitsch, S. J. (2025) ‘Fully 3D-printed gripper jaw with embedded sensitive sensor structures for robotic applications’, Sensors and Actuators A Physical, 399, p. 117334. doi:10.1016/j.sna.2025.117334.

IEEE

N. Hangst, T. M. Wendt, and S. J. Rupitsch, “Fully 3D-printed gripper jaw with embedded sensitive sensor structures for robotic applications,” Sensors and Actuators A Physical, vol. 399, p. 117334, 2025, doi: 10.1016/j.sna.2025.117334.

BibTeX

@article{hangst2025fully,
  title     = {{Fully 3D-printed gripper jaw with embedded sensitive sensor structures for robotic applications}},
  author    = {Hangst, Nikolai and Wendt, Thomas M. and Rupitsch, Stefan J.},
  journal   = {Sensors and Actuators A Physical},
  year      = {2025},
  volume    = {399},
  pages     = {117334},
  doi       = {10.1016/j.sna.2025.117334},
  url       = {https://doi.org/10.1016/j.sna.2025.117334}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies

  • embedded sensors
  • multi-material extrusion
  • robotic gripper
  • viscoelastic behavior

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Hangst, N., Wendt, T. M., & Rupitsch, S. J. (2025). Fully 3D-printed gripper jaw with embedded sensitive sensor structures for robotic applications. Sensors and Actuators A Physical, 399, 117334. https://doi.org/10.1016/j.sna.2025.117334

How many times has this paper been cited?

3 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Sensors and Actuators A Physical: sign in and open the full text from this page.

Who wrote this paper?

Nikolai Hangst, Thomas M. Wendt, Stefan J. Rupitsch.

What is the DOI of this paper?

10.1016/j.sna.2025.117334, permanently at https://doi.org/10.1016/j.sna.2025.117334. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.