Journal article · 2025 · Open access

Fabrication and characterization of a pneumatic soft gripper integrated with a novel 3D-printed piezoresistive force sensor

Hyun Jae Lee, Justin Rejimone, Zhiqiang Liu, Simon S. Park, Keekyoung Kim

Smart Materials and Structures, 34(3), 035002 · Published 4 February 2025 · DOI 10.1088/1361-665x/adacba

Open full textCite this paper

In brief

“Fabrication and characterization of a pneumatic soft gripper integrated with a novel 3D-printed piezoresistive force sensor” is a 2025 journal article by Hyun Jae Lee and 4 co-authors, published in Smart Materials and Structures. OpenAlex counts 5 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Smart Materials and Structures.

Citations
5
Most cited in
2025 (4)
Field-weighted impact
0.88
References
29
Authors
5

Abstract

A pneumatic soft gripper, composed of multiple elastomeric materials, was designed and manufactured based on gripping simulations. The simulation results demonstrated that the different stiffnesses of the elastomeric materials can influence the internal air pressure required for the proper actuation of the gripper. Considering the substrate properties and the morphological changes of the soft gripper during gripping, a piezoresistive force sensor was developed using elastomers and conductive filaments with the aid of additive manufacturing techniques. We confirmed the reproducibility and stability of the proposed piezoresistive force sensor through evaluations under various fabrication conditions. Results from touch experiments and compressive force measurements indicated that the stiffness of the sensor substrate and the thickness of the conductive part of the sensor affected the sensitivity and reliability of the sensor with respect to different levels of applied forces. Incorporating a rigid panel between the soft gripper and the piezoresistive force sensor diminished the effect of the variable stiffness and curvature of the gripper on the measurement of electrical resistance generated by the piezoresistive force sensor. Our 3D-printed sensor combined with elastomeric materials showed the possibility of differentiating the simple actuation and the gripping demonstration of the soft gripper.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Lee, H. J., Rejimone, J., Liu, Z., Park, S. S., & Kim, K. (2025). Fabrication and characterization of a pneumatic soft gripper integrated with a novel 3D-printed piezoresistive force sensor. Smart Materials and Structures, 34(3), 035002. https://doi.org/10.1088/1361-665x/adacba

MLA 9

Lee, Hyun Jae, et al. “Fabrication and characterization of a pneumatic soft gripper integrated with a novel 3D-printed piezoresistive force sensor.” Smart Materials and Structures, vol. 34, no. 3, 2025, p. 035002. https://doi.org/10.1088/1361-665x/adacba.

Chicago

Lee, Hyun Jae, Justin Rejimone, Zhiqiang Liu, Simon S. Park, and Keekyoung Kim. 2025. “Fabrication and characterization of a pneumatic soft gripper integrated with a novel 3D-printed piezoresistive force sensor.” Smart Materials and Structures 34 (3): 035002. https://doi.org/10.1088/1361-665x/adacba.

Harvard

Lee, H. J. et al. (2025) ‘Fabrication and characterization of a pneumatic soft gripper integrated with a novel 3D-printed piezoresistive force sensor’, Smart Materials and Structures, 34(3), p. 035002. doi:10.1088/1361-665x/adacba.

IEEE

H. J. Lee, J. Rejimone, Z. Liu, S. S. Park, and K. Kim, “Fabrication and characterization of a pneumatic soft gripper integrated with a novel 3D-printed piezoresistive force sensor,” Smart Materials and Structures, vol. 34, no. 3, p. 035002, 2025, doi: 10.1088/1361-665x/adacba.

BibTeX

@article{lee2025fabrication,
  title     = {{Fabrication and characterization of a pneumatic soft gripper integrated with a novel 3D-printed piezoresistive force sensor}},
  author    = {Lee, Hyun Jae and Rejimone, Justin and Liu, Zhiqiang and Park, Simon S. and Kim, Keekyoung},
  journal   = {Smart Materials and Structures},
  year      = {2025},
  volume    = {34},
  number    = {3},
  pages     = {035002},
  doi       = {10.1088/1361-665x/adacba},
  url       = {https://doi.org/10.1088/1361-665x/adacba}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • piezoresistive force sensor
  • 3D-printed sensors
  • elastomeric materials
  • conductive filaments
  • sensor stiffness
  • sensor sensitivity
  • soft robotics
  • force measurement

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Lee, H. J., Rejimone, J., Liu, Z., Park, S. S., & Kim, K. (2025). Fabrication and characterization of a pneumatic soft gripper integrated with a novel 3D-printed piezoresistive force sensor. Smart Materials and Structures, 34(3), 035002. https://doi.org/10.1088/1361-665x/adacba

How many times has this paper been cited?

5 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Smart Materials and Structures: sign in and open the full text from this page.

Who wrote this paper?

Hyun Jae Lee, Justin Rejimone, Zhiqiang Liu, Simon S. Park, Keekyoung Kim.

What is the DOI of this paper?

10.1088/1361-665x/adacba, permanently at https://doi.org/10.1088/1361-665x/adacba. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.