Conference paper · 2024 · Open access
Force Sensor for Versatile Single-Step Sensor Integration in 3D-Printed Parts
Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ..., 01–04 · Published 20 October 2024 · DOI 10.1109/sensors60989.2024.10784826
In brief
“Force Sensor for Versatile Single-Step Sensor Integration in 3D-Printed Parts” is a 2024 conference paper by Felix Herbst and 6 co-authors, published in Proceedings of IEEE Sensors/Proceedings of IEEE Sensors .... OpenAlex counts 12 citations as of 22 November 2026, which puts it in the top 8% of works published in 2024 by citations. It is open access: the full text is free to read at Technischen Universität Darmstadt.
- Citations
- 12
- Most cited in
- 2025 (8)
- Field-weighted impact
- 5.45
- References
- 31
- Authors
- 7
Abstract
Fused filament fabrication enables low-cost and highly adaptable production for industrial applications and the consumer market. Sensor integration requires individual development and production steps, increasing cost and limiting accessibility. 3D-printed sensors offer a low-cost alternative. Available approaches either adapt conventional sensors for additive manufacturing or offer individual solutions for every application. We present a universal force sensor that is directly integrated and encapsulated during the printing process. The design consists of two measurement grids based on the piezoresistive effect, in a half-bridge configuration. Only commercially available conductive filament is used. The sensor geometry includes electrical connections and contact interfaces, thus, enabling a full encapsulation inside the target body. The function is examined by measurements on various test bodies, exhibiting a small linearity error of 3.6 % and the ability to compensate temperature influences. We demonstrate the capa-bilities in a customized robotic gripper, where the sensor is able to detect whether the grasping operation was successful through contact force measurements. Our approach offers a straightforward solution for integrating force sensing capabilities into 3D-printed parts by simplifying the design process to a drag-and-drop operation in any design software.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Herbst, F., Sundaralingam, E., Latsch, B., Suppelt, S., Seiler, J., Altmann, A. A., & Kupnik, M. (2024). Force Sensor for Versatile Single-Step Sensor Integration in 3D-Printed Parts. Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ..., 01–04. https://doi.org/10.1109/sensors60989.2024.10784826
MLA 9
Herbst, Felix, et al. “Force Sensor for Versatile Single-Step Sensor Integration in 3D-Printed Parts.” Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ..., 2024, pp. 01–04. https://doi.org/10.1109/sensors60989.2024.10784826.
Chicago
Herbst, Felix, Esan Sundaralingam, Bastian Latsch, Sven Suppelt, Julian Seiler, Alexander Anton Altmann, and Mario Kupnik. 2024. “Force Sensor for Versatile Single-Step Sensor Integration in 3D-Printed Parts.” Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ...: 01–04. https://doi.org/10.1109/sensors60989.2024.10784826.
Harvard
Herbst, F. et al. (2024) ‘Force Sensor for Versatile Single-Step Sensor Integration in 3D-Printed Parts’, Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ..., pp. 01–04. doi:10.1109/sensors60989.2024.10784826.
IEEE
F. Herbst et al., “Force Sensor for Versatile Single-Step Sensor Integration in 3D-Printed Parts,” Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ..., pp. 01–04, 2024, doi: 10.1109/sensors60989.2024.10784826.
BibTeX
@inproceedings{herbst2024force,
title = {{Force Sensor for Versatile Single-Step Sensor Integration in 3D-Printed Parts}},
author = {Herbst, Felix and Sundaralingam, Esan and Latsch, Bastian and Suppelt, Sven and Seiler, Julian and Altmann, Alexander Anton and Kupnik, Mario},
booktitle = {Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ...},
year = {2024},
pages = {01--04},
doi = {10.1109/sensors60989.2024.10784826},
url = {https://doi.org/10.1109/sensors60989.2024.10784826}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2024 | 2 | |
| 2025 | 8 | |
| 2026 | 2 |
Its field-weighted citation impact is 5.45: it has been cited 5.45 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- force sensor
- 3D-printed sensors
- fused deposition modeling
- piezoresistivity
- half-bridge configuration
- conductive filaments
- sensor encapsulation
- robotic gripper
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Herbst, F., Sundaralingam, E., Latsch, B., Suppelt, S., Seiler, J., Altmann, A. A., & Kupnik, M. (2024). Force Sensor for Versatile Single-Step Sensor Integration in 3D-Printed Parts. Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ..., 01–04. https://doi.org/10.1109/sensors60989.2024.10784826
How many times has this paper been cited?
12 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Technischen Universität Darmstadt: sign in and open the full text from this page.
Who wrote this paper?
Felix Herbst, Esan Sundaralingam, Bastian Latsch, Sven Suppelt, Julian Seiler, Alexander Anton Altmann, Mario Kupnik.
What is the DOI of this paper?
10.1109/sensors60989.2024.10784826, permanently at https://doi.org/10.1109/sensors60989.2024.10784826. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.