Journal article · 2005 · Open access

Friction and Wear Properties of SiC-Ti and SiC-Al Films Deposited by Simultaneous RF Magnetron Sputtering

Masahiko Katô, Keijiro Nakasa, Jinhua ZHENG, Satoshi Hirota

TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 71(702), 359–366 · Published 1 January 2005 · DOI 10.1299/kikaia.71.359

Free PDFView at the publisherCite this paper

In brief

“Friction and Wear Properties of SiC-Ti and SiC-Al Films Deposited by Simultaneous RF Magnetron Sputtering” is a 2005 journal article by Masahiko Katô and 3 co-authors, published in TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A. OpenAlex counts 3 citations as of 16 November 2026. It is open access: the full text is free to read at TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A.

Citations
3
Field-weighted impact
0.93
References
1
Authors
4

Abstract

In order to improve friction and wear properties of amorphous SiC film deposited on titanium substrate specimen, Ti or Al was added in SiC film by simultaneous sputtering of SiC and Ti or Al targets using a dual-cathode RF magnetron sputtering apparatus. Wear tests were carried out on the specimens using a ball-on-disk type testing apparatus with SiC ball. The result shows that the addition of a certain amount of Ti or Al decreases wear rate of SiC film and increases the number of rotation cycles to delamination. When the Ti concentration is 2.6 at.%, the friction coefficient decreases to a minimum value of 0.04, which is about a half of SiC film without Ti and diamond-like carbon (DLC) film. This lower friction coefficient of SiC-2.6%Ti film than DLC film is obtained also for other ceramics and metal balls. The SiC-1.5%Al film reveals higher wear resistance than the SiC or SiC-Ti films with low friction coefficient of 0.1. Observation of wear scar in the film and SiC ball during the wear test implies that wear debris plays an important role in reducing the friction coefficient. Nano-indentation tests shows that the stiffness and elastic modulus of SiC-1.5%Ti and SiC-3.6%Ti is the largest among other SiC films with different Ti or Al content.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Katô, M., Nakasa, K., ZHENG, J., & Hirota, S. (2005). Friction and Wear Properties of SiC-Ti and SiC-Al Films Deposited by Simultaneous RF Magnetron Sputtering. TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 71(702), 359–366. https://doi.org/10.1299/kikaia.71.359

MLA 9

Katô, Masahiko, et al. “Friction and Wear Properties of SiC-Ti and SiC-Al Films Deposited by Simultaneous RF Magnetron Sputtering.” TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, vol. 71, no. 702, 2005, pp. 359–366. https://doi.org/10.1299/kikaia.71.359.

Chicago

Katô, Masahiko, Keijiro Nakasa, Jinhua ZHENG, and Satoshi Hirota. 2005. “Friction and Wear Properties of SiC-Ti and SiC-Al Films Deposited by Simultaneous RF Magnetron Sputtering.” TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A 71 (702): 359–366. https://doi.org/10.1299/kikaia.71.359.

Harvard

Katô, M. et al. (2005) ‘Friction and Wear Properties of SiC-Ti and SiC-Al Films Deposited by Simultaneous RF Magnetron Sputtering’, TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 71(702), pp. 359–366. doi:10.1299/kikaia.71.359.

IEEE

M. Katô, K. Nakasa, J. ZHENG, and S. Hirota, “Friction and Wear Properties of SiC-Ti and SiC-Al Films Deposited by Simultaneous RF Magnetron Sputtering,” TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, vol. 71, no. 702, pp. 359–366, 2005, doi: 10.1299/kikaia.71.359.

BibTeX

@article{kato2005friction,
  title     = {{Friction and Wear Properties of SiC-Ti and SiC-Al Films Deposited by Simultaneous RF Magnetron Sputtering}},
  author    = {Katô, Masahiko and Nakasa, Keijiro and ZHENG, Jinhua and Hirota, Satoshi},
  journal   = {TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A},
  year      = {2005},
  volume    = {71},
  number    = {702},
  pages     = {359--366},
  doi       = {10.1299/kikaia.71.359},
  url       = {https://doi.org/10.1299/kikaia.71.359}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • friction coefficient
  • wear resistance
  • titanium addition
  • aluminum addition
  • delamination
  • wear debris
  • nanoindentation
  • elastic modulus

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Katô, M., Nakasa, K., ZHENG, J., & Hirota, S. (2005). Friction and Wear Properties of SiC-Ti and SiC-Al Films Deposited by Simultaneous RF Magnetron Sputtering. TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 71(702), 359–366. https://doi.org/10.1299/kikaia.71.359

How many times has this paper been cited?

3 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A.

Who wrote this paper?

Masahiko Katô, Keijiro Nakasa, Jinhua ZHENG, Satoshi Hirota.

What is the DOI of this paper?

10.1299/kikaia.71.359. The permanent link is https://doi.org/10.1299/kikaia.71.359.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.