Paper · 2007 · Open access
Wear and Delamination Behavior of SiC Thin Film under Repeated Sliding Load
Key engineering materials, 345-346, 669–672 · Published 15 August 2007 · DOI 10.4028/www.scientific.net/kem.345-346.669
In brief
“Wear and Delamination Behavior of SiC Thin Film under Repeated Sliding Load” is a 2007 paper by Keijiro Nakasa and 2 co-authors, published in Key engineering materials. OpenAlex counts 1 citations as of 16 November 2026. It is open access under a CC BY licence: the full text is free to read at Key engineering materials.
- Citations
- 1
- Field-weighted impact
- 0.46
- References
- 4
- Authors
- 3
Abstract
In order to improve friction and wear properties of amorphous SiC film deposited on titanium substrate specimen, Ti was added in SiC film by simultaneous sputtering of SiC and Ti targets using an RF magnetron sputtering apparatus. Wear tests were carried out on the specimens using a ball-on-disk type testing machine with SiC ball. The result shows that the addition of a certain amount of Ti decreases wear rate of SiC film and increases the number of rotation cycles to delamination. When the Ti concentration is 2.6 at.%, the friction coefficient decreases to a minimum value of 0.04, which is about a half of SiC film without Ti and DLC film. Observation of wear scar in the film and SiC ball during the wear test implies that wear debris plays an important role in reducing the friction coefficient. The wear depth at delamination is much smaller than the film thickness. The reason is that the parallel cracks are nucleated in the wear scar in an earlier stage and the delamination of film progresses from the cracks.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Nakasa, K., Kato, M., & Zheng, J. H. (2007). Wear and Delamination Behavior of SiC Thin Film under Repeated Sliding Load. Key engineering materials, 345-346, 669–672. https://doi.org/10.4028/www.scientific.net/kem.345-346.669
MLA 9
Nakasa, Keijiro, et al. “Wear and Delamination Behavior of SiC Thin Film under Repeated Sliding Load.” Key engineering materials, vol. 345-346, 2007, pp. 669–672. https://doi.org/10.4028/www.scientific.net/kem.345-346.669.
Chicago
Nakasa, Keijiro, Masahiko Kato, and Jin Hua Zheng. 2007. “Wear and Delamination Behavior of SiC Thin Film under Repeated Sliding Load.” Key engineering materials 345-346: 669–672. https://doi.org/10.4028/www.scientific.net/kem.345-346.669.
Harvard
Nakasa, K., Kato, M. and Zheng, J. H. (2007) ‘Wear and Delamination Behavior of SiC Thin Film under Repeated Sliding Load’, Key engineering materials, 345-346, pp. 669–672. doi:10.4028/www.scientific.net/kem.345-346.669.
IEEE
K. Nakasa, M. Kato, and J. H. Zheng, “Wear and Delamination Behavior of SiC Thin Film under Repeated Sliding Load,” Key engineering materials, vol. 345-346, pp. 669–672, 2007, doi: 10.4028/www.scientific.net/kem.345-346.669.
BibTeX
@article{nakasa2007wear,
title = {{Wear and Delamination Behavior of SiC Thin Film under Repeated Sliding Load}},
author = {Nakasa, Keijiro and Kato, Masahiko and Zheng, Jin Hua},
journal = {Key engineering materials},
year = {2007},
volume = {345-346},
pages = {669--672},
doi = {10.4028/www.scientific.net/kem.345-346.669},
url = {https://doi.org/10.4028/www.scientific.net/kem.345-346.669}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- titanium addition
- delamination
- wear rate
- friction coefficient
- wear scar
- wear debris
- crack nucleation
- RF magnetron sputtering
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Nakasa, K., Kato, M., & Zheng, J. H. (2007). Wear and Delamination Behavior of SiC Thin Film under Repeated Sliding Load. Key engineering materials, 345-346, 669–672. https://doi.org/10.4028/www.scientific.net/kem.345-346.669
How many times has this paper been cited?
1 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access: read the free full text at Key engineering materials.
Who wrote this paper?
Keijiro Nakasa, Masahiko Kato, Jin Hua Zheng.
What is the DOI of this paper?
10.4028/www.scientific.net/kem.345-346.669. The permanent link is https://doi.org/10.4028/www.scientific.net/kem.345-346.669.
Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.