Journal article · 2003 · Open access

Relation between Friction and Wear Properties and Delamination Behavior of Amorphous SiC Film Coated by Helicon Sputtering

Masahiko KATO, Keijiro Nakasa, Yan Hai Xu, Kazuhiro H. Tanaka

TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 69(688), 1731–1739 · Published 1 January 2003 · DOI 10.1299/kikaia.69.1731

Free PDFView at the publisherCite this paper

In brief

“Relation between Friction and Wear Properties and Delamination Behavior of Amorphous SiC Film Coated by Helicon Sputtering” is a 2003 journal article by Masahiko KATO and 3 co-authors, published in TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A. OpenAlex counts 10 citations as of 16 November 2026. It is open access: the full text is free to read at TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A.

Citations
10
Most cited in
2012 (1)
Authors
4

Abstract

SiC films were deposited on titanium substrate specimens by using a helicon-sputtering apparatus. Wear tests were carried out on the specimens using a pin-on-disk type testing machine, and the delamination behavior of the films during the tests was discussed from a viewpoint of fracture mechanics. Amorphous SiC film is formed by the sputtering, while crystalline SiC film is formed when the substrate is heated. The wear resistance of titanium is greatly enhanced by the amorphous SiC film with lower frictional coefficient and higher interfacial fracture toughness than the crystalline SiC film. The wear depth of the amorphous SiC at delamination is much deeper than that of the crystalline SiC film. In the wear test, parallel cracks are initiated perpendicular to the frictional direction before partial delamination of the film occurs, and the delamination area extends all over the wear scar with a small increase in rotation cycles. The delamination of film starts when the interfacial strain-energy release rate, G12, reaches the interfacial fracture toughness, GC12, which is decreased by the accumulation of fatigue damage during the wear cycles.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

KATO, M., Nakasa, K., Xu, Y. H., & Tanaka, K. H. (2003). Relation between Friction and Wear Properties and Delamination Behavior of Amorphous SiC Film Coated by Helicon Sputtering. TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 69(688), 1731–1739. https://doi.org/10.1299/kikaia.69.1731

MLA 9

KATO, Masahiko, et al. “Relation between Friction and Wear Properties and Delamination Behavior of Amorphous SiC Film Coated by Helicon Sputtering.” TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, vol. 69, no. 688, 2003, pp. 1731–1739. https://doi.org/10.1299/kikaia.69.1731.

Chicago

KATO, Masahiko, Keijiro Nakasa, Yan Hai Xu, and Kazuhiro H. Tanaka. 2003. “Relation between Friction and Wear Properties and Delamination Behavior of Amorphous SiC Film Coated by Helicon Sputtering.” TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A 69 (688): 1731–1739. https://doi.org/10.1299/kikaia.69.1731.

Harvard

KATO, M. et al. (2003) ‘Relation between Friction and Wear Properties and Delamination Behavior of Amorphous SiC Film Coated by Helicon Sputtering’, TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 69(688), pp. 1731–1739. doi:10.1299/kikaia.69.1731.

IEEE

M. KATO, K. Nakasa, Y. H. Xu, and K. H. Tanaka, “Relation between Friction and Wear Properties and Delamination Behavior of Amorphous SiC Film Coated by Helicon Sputtering,” TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, vol. 69, no. 688, pp. 1731–1739, 2003, doi: 10.1299/kikaia.69.1731.

BibTeX

@article{kato2003relation,
  title     = {{Relation between Friction and Wear Properties and Delamination Behavior of Amorphous SiC Film Coated by Helicon Sputtering}},
  author    = {KATO, Masahiko and Nakasa, Keijiro and Xu, Yan Hai and Tanaka, Kazuhiro H.},
  journal   = {TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A},
  year      = {2003},
  volume    = {69},
  number    = {688},
  pages     = {1731--1739},
  doi       = {10.1299/kikaia.69.1731},
  url       = {https://doi.org/10.1299/kikaia.69.1731}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • delamination
  • friction coefficient
  • wear resistance
  • titanium substrate
  • interfacial fracture toughness
  • energy release rate
  • fatigue damage
  • pin-on-disc test

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

KATO, M., Nakasa, K., Xu, Y. H., & Tanaka, K. H. (2003). Relation between Friction and Wear Properties and Delamination Behavior of Amorphous SiC Film Coated by Helicon Sputtering. TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 69(688), 1731–1739. https://doi.org/10.1299/kikaia.69.1731

How many times has this paper been cited?

10 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A.

Who wrote this paper?

Masahiko KATO, Keijiro Nakasa, Yan Hai Xu, Kazuhiro H. Tanaka.

What is the DOI of this paper?

10.1299/kikaia.69.1731. The permanent link is https://doi.org/10.1299/kikaia.69.1731.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.