Dissertation · 2016 · Open access

Avaliação de técnicas de soldagem MIG/MAG para deposição com arames AWS ERNiCrMo-3 e ER80S-B2 em aço estrutural ASTM A387 Gr.11

Nathália Escóssio Cavalcante

LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) · Published 1 January 2016

Open full textCite this paper

In brief

“Avaliação de técnicas de soldagem MIG/MAG para deposição com arames AWS ERNiCrMo-3 e ER80S-B2 em aço estrutural ASTM A387 Gr.11” is a 2016 dissertation by Nathália Escóssio Cavalcante, published in LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). OpenAlex counts 0 citations as of 22 November 2026. It is open access: the full text is free to read at LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas).

Citations
0
References
29
Authors
1

Abstract

The ASTM A387 Gr.11 steel is widely used in the oil & gas industry in applications at elevated pressures and temperatures, such as “coke drums”. Due to the work regime, coke drums undergo continuous variation in temperature along its length and thus, the thermal gradients and pressure variations for each operating cycle occurs. As a result, many problems can arise as hydrogen embrittlement and the appearance of "bulges". The bulges are preferred sites for cracking nucleation in coke drums. The actions commonly taken to solve the problems associated to cracking are the repair of cracked area by welding techniques. However, the application of many of these techniques, found operational and metallurgical problems that compromises the performance of welded components. Thus, this work aims to development and evaluation of repair techniques by welding, using the double layer temper bead technique in components made of ASTM A387 Gr.11 steel providing good mechanical and microstructural properties. The methodology of this study was divided into many stages, among them the application of hardness and microstructure evaluation criteria for determining the best welding conditions followed by the welding and characterization of the coatings. The influence of the control factors, such as welding heat input and waving was evaluated. Two filler metals were used: AWS ERNiCrMo-3 Ni based alloy (similar to alloy Inconel 625) and AWS ER80S-B2 low carbon steel (similar to the ASTM A387 Gr.11 steel) and three gas mixtures (Ar + 25% He, Ar + 4 % CO2 and Ar + 38%He + 4%CO2). The waving and welding heat input had influence on geometric features of the weld beads. The microstructure found in the heat affected zone of coatings consisted of bainite and tempered martensite. In the five welding conditions identified by the decision diagram it was found a significant grain refinement and a reduction in hardness values, when compared to the same conditions welded with single deposition proving the effectiveness of the double layer temper bead technique. In three of these conditions, the maximum hardness in the HAZ of the coatings was less than 237 HV, as required by the welding standard N-133 from Petrobras

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Cavalcante, N. E. (2016). Avaliação de técnicas de soldagem MIG/MAG para deposição com arames AWS ERNiCrMo-3 e ER80S-B2 em aço estrutural ASTM A387 Gr.11. LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). http://www.repositorio.ufc.br/handle/riufc/19007

MLA 9

Cavalcante, Nathália Escóssio. “Avaliação de técnicas de soldagem MIG/MAG para deposição com arames AWS ERNiCrMo-3 e ER80S-B2 em aço estrutural ASTM A387 Gr.11.” LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas), 2016. http://www.repositorio.ufc.br/handle/riufc/19007.

Chicago

Cavalcante, Nathália Escóssio. 2016. “Avaliação de técnicas de soldagem MIG/MAG para deposição com arames AWS ERNiCrMo-3 e ER80S-B2 em aço estrutural ASTM A387 Gr.11.” LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). http://www.repositorio.ufc.br/handle/riufc/19007.

Harvard

Cavalcante, N. E. (2016) ‘Avaliação de técnicas de soldagem MIG/MAG para deposição com arames AWS ERNiCrMo-3 e ER80S-B2 em aço estrutural ASTM A387 Gr.11’, LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). Available at: http://www.repositorio.ufc.br/handle/riufc/19007.

IEEE

N. E. Cavalcante, “Avaliação de técnicas de soldagem MIG/MAG para deposição com arames AWS ERNiCrMo-3 e ER80S-B2 em aço estrutural ASTM A387 Gr.11,” LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas), 2016.

BibTeX

@phdthesis{cavalcante2016avalia,
  title     = {{Avaliação de técnicas de soldagem MIG/MAG para deposição com arames AWS ERNiCrMo-3 e ER80S-B2 em aço estrutural ASTM A387 Gr.11}},
  author    = {Cavalcante, Nathália Escóssio},
  year      = {2016},
  url       = {http://www.repositorio.ufc.br/handle/riufc/19007}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Welding Techniques and Residual Stresses

  • MIG/MAG welding
  • coke drum
  • repair welding
  • welding heat input
  • heat-affected zone microstructure
  • bainite
  • tempered martensite
  • grain refinement

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Cavalcante, N. E. (2016). Avaliação de técnicas de soldagem MIG/MAG para deposição com arames AWS ERNiCrMo-3 e ER80S-B2 em aço estrutural ASTM A387 Gr.11. LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). http://www.repositorio.ufc.br/handle/riufc/19007

How many times has this paper been cited?

0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas): sign in and open the full text from this page.

Who wrote this paper?

Nathália Escóssio Cavalcante.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.