Dissertation · 2022 · Open access
Study of the MIG/MAG welding process for coating applications on steels using the AWS ERNiCrMo-3 alloy in the horizontal position
LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) · Published 1 January 2022
In brief
“Study of the MIG/MAG welding process for coating applications on steels using the AWS ERNiCrMo-3 alloy in the horizontal position” is a 2022 dissertation by Felipe Wendrio da Silva Marques, published in LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). OpenAlex counts 0 citations as of 22 November 2026. It is open access: the full text is free to read at LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas).
- Citations
- 0
- Authors
- 1
Abstract
The use of welding coatings has broad applicability in the industry as it provides the substrate with characteristics such as resistance to corrosion and wear. Some steels, such as HSLA (high strength and low alloy) and C-Mn steels, are coated with special alloys, such as nickel alloys, which have excellent corrosion resistance. The demand for increasing the viability of the application and economic attractiveness of the welding overlay technique makes it essential to carry out an in-depth study of welding operational variables to produce coatings without defects, with a low dilution level, which meets the needs imposed by the industry. Thus, this study aims to produce coatings of the AWS ERNiCrMo-3 by the MIG/MAG welding process in the horizontal position through a systematic study, making it possible to evaluate the effect of a series of operational variables on the characteristics of the weld beads. The effects of certain levels of control factors (reference voltage (Ur), wire feed speed (Valim), inverse of the rise inductance (Ks) and inverse of the fall inductance (Kd)) in the qualitative aspects of the passes and some indicators measured through data acquisition. From selecting the best parameters, it was possible to choose the parameters of the controlled short-circuit mode, resulting in passes with better stability and little splash. Furthermore, the torch oscillation parameters were evaluated for the types of triangular weaving, switchback and the linear trajectory of the torch in some geometric variables, especially in the dilution. The Higuchi test was applied to evaluate the deposition of the second layer using a quenched base metal. Single weld beads were also deposited on as-received base metals, aiming to assess the heat-affected zone (HAZ) microhardness and microstructure profiles for applying the double-layer controlled deposition technique (DL-CDT). The parameter with the highest energy to be deposited in the second layer was deposited in pulsed mode, with twice the heat input of the first layer. Through the analyzes it was verified that no condition was approved through the Decision Diagrams. In addition, passes through the quenched base metal produced more extensive and refined heat-affected zones. The coatings made had the HAZ consisting predominantly of bainite, with the presence, in general, of decarburization near the interface with the fusion zone. It was not possible to obtain significant microhardness reductions in the coatings due to the non-fulfillment of all the necessary criteria to guarantee the effectiveness of DL-CDT. In addition, some coatings showed points of discontinuity between the HAZ and the molten zone, showing the need to use a higher arc power…
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Marques, F. W. D. S. (2022). Study of the MIG/MAG welding process for coating applications on steels using the AWS ERNiCrMo-3 alloy in the horizontal position. LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). http://www.repositorio.ufc.br/handle/riufc/72360
MLA 9
Marques, Felipe Wendrio da Silva. “Study of the MIG/MAG welding process for coating applications on steels using the AWS ERNiCrMo-3 alloy in the horizontal position.” LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas), 2022. http://www.repositorio.ufc.br/handle/riufc/72360.
Chicago
Marques, Felipe Wendrio da Silva. 2022. “Study of the MIG/MAG welding process for coating applications on steels using the AWS ERNiCrMo-3 alloy in the horizontal position.” LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). http://www.repositorio.ufc.br/handle/riufc/72360.
Harvard
Marques, F. W. D. S. (2022) ‘Study of the MIG/MAG welding process for coating applications on steels using the AWS ERNiCrMo-3 alloy in the horizontal position’, LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). Available at: http://www.repositorio.ufc.br/handle/riufc/72360.
IEEE
F. W. D. S. Marques, “Study of the MIG/MAG welding process for coating applications on steels using the AWS ERNiCrMo-3 alloy in the horizontal position,” LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas), 2022.
BibTeX
@phdthesis{marques2022study,
title = {{Study of the MIG/MAG welding process for coating applications on steels using the AWS ERNiCrMo-3 alloy in the horizontal position}},
author = {Marques, Felipe Wendrio da Silva},
year = {2022},
url = {http://www.repositorio.ufc.br/handle/riufc/72360}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Welding Techniques and Residual Stresses
- MIG/MAG welding
- welding parameters
- bainite
- decarburization
- dilution
- high-strength low-alloy steel
- C-Mn steel
- corrosion resistance
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Marques, F. W. D. S. (2022). Study of the MIG/MAG welding process for coating applications on steels using the AWS ERNiCrMo-3 alloy in the horizontal position. LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). http://www.repositorio.ufc.br/handle/riufc/72360
How many times has this paper been cited?
0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas): sign in and open the full text from this page.
Who wrote this paper?
Felipe Wendrio da Silva Marques.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.