Paper · 2015 · Open access
Tribological Characteristics of Amorphous Hydrogenated DLC in the Presence of Commercial Lubricating Oil
Key engineering materials, 642, 179–183 · Published 15 April 2015 · DOI 10.4028/www.scientific.net/kem.642.179
In brief
“Tribological Characteristics of Amorphous Hydrogenated DLC in the Presence of Commercial Lubricating Oil” is a 2015 paper by K.A.H. Al Mahmud and 3 co-authors, published in Key engineering materials. OpenAlex counts 2 citations as of 17 November 2026, which puts it in the top 7% of works published in 2015 by citations. It is open access under a CC BY licence: the full text is free to read at Key engineering materials.
- Citations
- 2
- Most cited in
- 2024 (2)
- References
- 19
- Authors
- 4
Abstract
Currently diamond like carbon (DLC) coatings application for automotive components is becoming a favorable strategy to cope with new challenges faced by automotive industries. DLC coating is very effective to lower the coefficient of friction and wear rate, which in turn could improve fuel efficiency and durability of the engine components. Commercially available fully formulated lubricating oils are specially produced to enhance the lubrication of ferrous materials. Therefore, nonferrous coating (DLC) interaction with commercial lubricating oil needs to be investigated. In this current investigation, coefficient of friction and wear rate were investigated by ball on plate tribo testing machine at different temperatures in the presence of SAE 40 lubricating oil. At high test temperature coefficient of friction decreases, however wear rate increases for the a-C:H coated plate, however, steel/steel contact shows opposite trend of coefficient of friction and wear rate change.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Al Mahmud, K., Kalam, M., Masjuki, H. H., & Mobarak, H. (2015). Tribological Characteristics of Amorphous Hydrogenated DLC in the Presence of Commercial Lubricating Oil. Key engineering materials, 642, 179–183. https://doi.org/10.4028/www.scientific.net/kem.642.179
MLA 9
Al Mahmud, K.A.H., et al. “Tribological Characteristics of Amorphous Hydrogenated DLC in the Presence of Commercial Lubricating Oil.” Key engineering materials, vol. 642, 2015, pp. 179–183. https://doi.org/10.4028/www.scientific.net/kem.642.179.
Chicago
Al Mahmud, K.A.H., M.A. Kalam, Haji Hassan Masjuki, and H.M. Mobarak. 2015. “Tribological Characteristics of Amorphous Hydrogenated DLC in the Presence of Commercial Lubricating Oil.” Key engineering materials 642: 179–183. https://doi.org/10.4028/www.scientific.net/kem.642.179.
Harvard
Al Mahmud, K. et al. (2015) ‘Tribological Characteristics of Amorphous Hydrogenated DLC in the Presence of Commercial Lubricating Oil’, Key engineering materials, 642, pp. 179–183. doi:10.4028/www.scientific.net/kem.642.179.
IEEE
K. Al Mahmud, M. Kalam, H. H. Masjuki, and H. Mobarak, “Tribological Characteristics of Amorphous Hydrogenated DLC in the Presence of Commercial Lubricating Oil,” Key engineering materials, vol. 642, pp. 179–183, 2015, doi: 10.4028/www.scientific.net/kem.642.179.
BibTeX
@article{almahmud2015tribological,
title = {{Tribological Characteristics of Amorphous Hydrogenated DLC in the Presence of Commercial Lubricating Oil}},
author = {Al Mahmud, K.A.H. and Kalam, M.A. and Masjuki, Haji Hassan and Mobarak, H.M.},
journal = {Key engineering materials},
year = {2015},
volume = {642},
pages = {179--183},
doi = {10.4028/www.scientific.net/kem.642.179},
url = {https://doi.org/10.4028/www.scientific.net/kem.642.179}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
- diamond-like carbon films
- friction coefficient
- wear rate
- tribology
- temperature effects
- steel-steel contact
- automotive engine components
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Al Mahmud, K., Kalam, M., Masjuki, H. H., & Mobarak, H. (2015). Tribological Characteristics of Amorphous Hydrogenated DLC in the Presence of Commercial Lubricating Oil. Key engineering materials, 642, 179–183. https://doi.org/10.4028/www.scientific.net/kem.642.179
How many times has this paper been cited?
2 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Key engineering materials: sign in and open the full text from this page.
Who wrote this paper?
K.A.H. Al Mahmud, M.A. Kalam, Haji Hassan Masjuki, H.M. Mobarak.
What is the DOI of this paper?
10.4028/www.scientific.net/kem.642.179, permanently at https://doi.org/10.4028/www.scientific.net/kem.642.179. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.