Journal article · 2021 · Open access

Synthesis of TiB2-Ni3B nanocomposite coating by DC magnetron sputtering for corrosion-erosion protection

Jorge Morales Hernández, José Manuel Juárez García, H. Herrera-Hernández, Hector Javier Dorantes-Rosales, Raúl Herrera-Basurto

Materials Research Express, 8(12), 126403 · Published 1 December 2021 · DOI 10.1088/2053-1591/ac3f0c

Open PDFView at the publisherCite this paper

In brief

“Synthesis of TiB2-Ni3B nanocomposite coating by DC magnetron sputtering for corrosion-erosion protection” is a 2021 journal article by Jorge Morales Hernández and 4 co-authors, published in Materials Research Express. OpenAlex counts 3 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Materials Research Express.

Citations
3
Most cited in
2022 (1)
Field-weighted impact
0.22
References
35
Authors
5

Abstract

Significant contribution on corrosion-erosion resistance of Ni3B-TiB2 nanocomposite coating of 1 μm of thickness, deposited by DC magnetron Sputtering on stainless steel 304 substrates was studied. Nickel phase (γ Ni) plus Ni3B-TiB2 phases were synthesized previously by Mechanical Alloying (MA). Solid cathode (76.2 mm of diameter and 3 mm of thickness) used to grow thin films was manufactured with the alloyed powders, applying a uniaxial load of 70 MPa at room temperature and sintered at 900 °C for two hours. Microstructure and mechanical properties of the coatings were characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), nanoindentation, and wear test with a ball-on-disc tribometer. Compact coating of Ni3B-TiB2 with a microstructure of prismatic crystals after annealing treatment, showing a uniform coating with good adherence and low friction coefficient of 0.5, correlated with a low roughness of Ra ≈ 0.0439 ± 0.0069 μm. The average hardness of 537.4 HV (5265.0 MPa) and wear coefficient at room temperature of 2.552E-10 m2N−1 correspond with medium-hard phases with an elastic-plastic behavior suitable for fatigue applications. Geothermal fluid modified was synthesized in the lab with NaCl/Na2SO4 to evaluate the corrosion resistance of the films in a standard three electrodes cell, characterizing a corrosion rate of 0.0008 and 0.001 mm*year−1 at 25 and 80 °C respectively during 86.4 ks (24 h) of exposition; showing a resistive coating without corrosion products and with good response to the geothermal environment.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Hernández, J. M., García, J. M. J., Herrera-Hernández, H., Dorantes-Rosales, H. J., & Herrera-Basurto, R. (2021). Synthesis of TiB2-Ni3B nanocomposite coating by DC magnetron sputtering for corrosion-erosion protection. Materials Research Express, 8(12), 126403. https://doi.org/10.1088/2053-1591/ac3f0c

MLA 9

Hernández, Jorge Morales, et al. “Synthesis of TiB2-Ni3B nanocomposite coating by DC magnetron sputtering for corrosion-erosion protection.” Materials Research Express, vol. 8, no. 12, 2021, p. 126403. https://doi.org/10.1088/2053-1591/ac3f0c.

Chicago

Hernández, Jorge Morales, José Manuel Juárez García, H. Herrera-Hernández, Hector Javier Dorantes-Rosales, and Raúl Herrera-Basurto. 2021. “Synthesis of TiB2-Ni3B nanocomposite coating by DC magnetron sputtering for corrosion-erosion protection.” Materials Research Express 8 (12): 126403. https://doi.org/10.1088/2053-1591/ac3f0c.

Harvard

Hernández, J. M. et al. (2021) ‘Synthesis of TiB2-Ni3B nanocomposite coating by DC magnetron sputtering for corrosion-erosion protection’, Materials Research Express, 8(12), p. 126403. doi:10.1088/2053-1591/ac3f0c.

IEEE

J. M. Hernández, J. M. J. García, H. Herrera-Hernández, H. J. Dorantes-Rosales, and R. Herrera-Basurto, “Synthesis of TiB2-Ni3B nanocomposite coating by DC magnetron sputtering for corrosion-erosion protection,” Materials Research Express, vol. 8, no. 12, p. 126403, 2021, doi: 10.1088/2053-1591/ac3f0c.

BibTeX

@article{hernandez2021synthesis,
  title     = {{Synthesis of TiB2-Ni3B nanocomposite coating by DC magnetron sputtering for corrosion-erosion protection}},
  author    = {Hernández, Jorge Morales and García, José Manuel Juárez and Herrera-Hernández, H. and Dorantes-Rosales, Hector Javier and Herrera-Basurto, Raúl},
  journal   = {Materials Research Express},
  year      = {2021},
  volume    = {8},
  number    = {12},
  pages     = {126403},
  doi       = {10.1088/2053-1591/ac3f0c},
  url       = {https://doi.org/10.1088/2053-1591/ac3f0c}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202211
202311
202511

Its field-weighted citation impact is 0.22: it has been cited 0.22 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • DC magnetron sputtering
  • 304 stainless steel
  • mechanical alloying
  • solid cathode
  • wear coefficient
  • hardness
  • friction coefficient
  • surface roughness

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Hernández, J. M., García, J. M. J., Herrera-Hernández, H., Dorantes-Rosales, H. J., & Herrera-Basurto, R. (2021). Synthesis of TiB2-Ni3B nanocomposite coating by DC magnetron sputtering for corrosion-erosion protection. Materials Research Express, 8(12), 126403. https://doi.org/10.1088/2053-1591/ac3f0c

How many times has this paper been cited?

3 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Materials Research Express: sign in and open the PDF from this page.

Who wrote this paper?

Jorge Morales Hernández, José Manuel Juárez García, H. Herrera-Hernández, Hector Javier Dorantes-Rosales, Raúl Herrera-Basurto.

What is the DOI of this paper?

10.1088/2053-1591/ac3f0c, permanently at https://doi.org/10.1088/2053-1591/ac3f0c. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.