Journal article · 2011 · Open access

Micro- and nanocomposite Ti-Al-N/Ni-Cr-B-Si-Fe-based protective coatings: Structure and properties

Alexander D. Pogrebnjak, A.A. Drobyshevskaya, Vyacheslav M. Beresnev, М. К. Кылышканов, T. V. Kirik, Sergey N Dub, Fadei Fadeevich Komarov, A.P. Shypylenko, Yu. Zh. Tuleushev

Technical Physics, 56(7), 1023–1030 · Published 1 July 2011 · DOI 10.1134/s1063784211070188

Open full textView at the publisherCite this paper

In brief

“Micro- and nanocomposite Ti-Al-N/Ni-Cr-B-Si-Fe-based protective coatings: Structure and properties” is a 2011 journal article by Alexander D. Pogrebnjak and 8 co-authors, published in Technical Physics. OpenAlex counts 18 citations as of 17 November 2026. It is open access: the full text is free to read at BSU Digital Library (Belarusian State University).

Citations
18
Most cited in
2017 (5)
Field-weighted impact
1.59
References
14
Authors
9

Abstract

A new type of nanocomposite Ti-Al-N/Ni-Cr-B-Si-Fe-based coatings 70–90 μm thick produced by combined magnetron sputtering and a plasma detonation technology is created and studied. Phases Ti 3 AlN + Ti 3 Al 2 N 2 and the phases caused by the interaction of plasma with a thick Al 3 Ti + Ni 3 Ti coating are detected in the coatings. The TiAlN phase has a grain size of 18–24 nm, and other phases has a grain size of 35–90 nm. The elastic modulus of the Ti-Al-N coating is E = 342 ± 1 GPa and its average hardness is H = 20.8 ± 1.8 GPa. The corrosion rate of this coating is very low, 4.8 μg/year, which is about three orders of magnitude lower than that of stainless steel (substrate). Wear tests performed according to the cylinder-surface scheme demonstrate high wear resistance and high adhesion between the thick and thin coatings.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Pogrebnjak, A. D., Drobyshevskaya, A., Beresnev, V. M., Кылышканов, М. К., Kirik, T. V., Dub, S. N., Komarov, F. F., Shypylenko, A., & Tuleushev, Y. Z. (2011). Micro- and nanocomposite Ti-Al-N/Ni-Cr-B-Si-Fe-based protective coatings: Structure and properties. Technical Physics, 56(7), 1023–1030. https://doi.org/10.1134/s1063784211070188

MLA 9

Pogrebnjak, Alexander D., et al. “Micro- and nanocomposite Ti-Al-N/Ni-Cr-B-Si-Fe-based protective coatings: Structure and properties.” Technical Physics, vol. 56, no. 7, 2011, pp. 1023–1030. https://doi.org/10.1134/s1063784211070188.

Chicago

Pogrebnjak, Alexander D., A.A. Drobyshevskaya, Vyacheslav M. Beresnev, М. К. Кылышканов, T. V. Kirik, Sergey N Dub, Fadei Fadeevich Komarov, A.P. Shypylenko, and Yu. Zh. Tuleushev. 2011. “Micro- and nanocomposite Ti-Al-N/Ni-Cr-B-Si-Fe-based protective coatings: Structure and properties.” Technical Physics 56 (7): 1023–1030. https://doi.org/10.1134/s1063784211070188.

Harvard

Pogrebnjak, A. D. et al. (2011) ‘Micro- and nanocomposite Ti-Al-N/Ni-Cr-B-Si-Fe-based protective coatings: Structure and properties’, Technical Physics, 56(7), pp. 1023–1030. doi:10.1134/s1063784211070188.

IEEE

A. D. Pogrebnjak et al., “Micro- and nanocomposite Ti-Al-N/Ni-Cr-B-Si-Fe-based protective coatings: Structure and properties,” Technical Physics, vol. 56, no. 7, pp. 1023–1030, 2011, doi: 10.1134/s1063784211070188.

BibTeX

@article{pogrebnjak2011micro,
  title     = {{Micro- and nanocomposite Ti-Al-N/Ni-Cr-B-Si-Fe-based protective coatings: Structure and properties}},
  author    = {Pogrebnjak, Alexander D. and Drobyshevskaya, A.A. and Beresnev, Vyacheslav M. and Кылышканов, М. К. and Kirik, T. V. and Dub, Sergey N and Komarov, Fadei Fadeevich and Shypylenko, A.P. and Tuleushev, Yu. Zh.},
  journal   = {Technical Physics},
  year      = {2011},
  volume    = {56},
  number    = {7},
  pages     = {1023--1030},
  doi       = {10.1134/s1063784211070188},
  url       = {https://doi.org/10.1134/s1063784211070188}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201211
201433
201522
201622
201755
201911
202011
202111
202411
202511

Its field-weighted citation impact is 1.59: it has been cited 1.59 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • TiAlN coating
  • nanocomposite coatings
  • protective coatings
  • magnetron sputtering
  • Al3Ti
  • Ni3Ti
  • grain size
  • elastic modulus

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Pogrebnjak, A. D., Drobyshevskaya, A., Beresnev, V. M., Кылышканов, М. К., Kirik, T. V., Dub, S. N., Komarov, F. F., Shypylenko, A., & Tuleushev, Y. Z. (2011). Micro- and nanocomposite Ti-Al-N/Ni-Cr-B-Si-Fe-based protective coatings: Structure and properties. Technical Physics, 56(7), 1023–1030. https://doi.org/10.1134/s1063784211070188

How many times has this paper been cited?

18 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at BSU Digital Library (Belarusian State University): sign in and open the full text from this page.

Who wrote this paper?

Alexander D. Pogrebnjak, A.A. Drobyshevskaya, Vyacheslav M. Beresnev, М. К. Кылышканов, T. V. Kirik, Sergey N Dub, Fadei Fadeevich Komarov, A.P. Shypylenko, Yu. Zh. Tuleushev.

What is the DOI of this paper?

10.1134/s1063784211070188, permanently at https://doi.org/10.1134/s1063784211070188. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.