Journal article · 2012 · Open access

Research on the Structure and Friction Properties of the SiC Particles Reinforced Copper-Based Self-Lubricating Composites

Suiyuan Chen, Hong Fan, Di An, Jing Liang, Chang Sheng Liu

Advanced materials research, 535-537, 77–80 · Published 14 June 2012 · DOI 10.4028/www.scientific.net/amr.535-537.77

Open full textCite this paper

In brief

“Research on the Structure and Friction Properties of the SiC Particles Reinforced Copper-Based Self-Lubricating Composites” is a 2012 journal article by Suiyuan Chen and 4 co-authors, published in Advanced materials research. OpenAlex counts 2 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Advanced materials research.

Citations
2
Most cited in
2019 (1)
References
11
Authors
5

Abstract

Using atomizing Cu-Ni-Sn-Pb powder as the matrix alloy and adding 2wt% graphite as solid lubricant phase, a Cu-based self-lubricating composite reinforced with SiC ( with 0wt%, 1wt% and 2wt%14µm SiC) was prepared under the optimized powder metallurgy sintering condition. The structure and properties of the samples were analyzed using a scanning electron microscopy, X-ray diffraction, a tensile tester, a hardness tester, and a friction tester. The results indicate that the prepared sample of 1wt%14µm SiC, when sintered at 910°C for 4 hours, possessed a perfect composite structure in alloy strengthening, graphite lubrication and SiC particle reinforcing. The main phases consisted of α-solid solution of copper, CuNi2Sn, Pb, graphite, and SiC. The wear loss was 12.6mg and the friction coefficient was 0.26. SiC particles reinforcement was optimized using fine grain to enhance the anti-wear and self-lubricating properties of the alloy matrix.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Chen, S., Fan, H., An, D., Liang, J., & Liu, C. S. (2012). Research on the Structure and Friction Properties of the SiC Particles Reinforced Copper-Based Self-Lubricating Composites. Advanced materials research, 535-537, 77–80. https://doi.org/10.4028/www.scientific.net/amr.535-537.77

MLA 9

Chen, Suiyuan, et al. “Research on the Structure and Friction Properties of the SiC Particles Reinforced Copper-Based Self-Lubricating Composites.” Advanced materials research, vol. 535-537, 2012, pp. 77–80. https://doi.org/10.4028/www.scientific.net/amr.535-537.77.

Chicago

Chen, Suiyuan, Hong Fan, Di An, Jing Liang, and Chang Sheng Liu. 2012. “Research on the Structure and Friction Properties of the SiC Particles Reinforced Copper-Based Self-Lubricating Composites.” Advanced materials research 535-537: 77–80. https://doi.org/10.4028/www.scientific.net/amr.535-537.77.

Harvard

Chen, S. et al. (2012) ‘Research on the Structure and Friction Properties of the SiC Particles Reinforced Copper-Based Self-Lubricating Composites’, Advanced materials research, 535-537, pp. 77–80. doi:10.4028/www.scientific.net/amr.535-537.77.

IEEE

S. Chen, H. Fan, D. An, J. Liang, and C. S. Liu, “Research on the Structure and Friction Properties of the SiC Particles Reinforced Copper-Based Self-Lubricating Composites,” Advanced materials research, vol. 535-537, pp. 77–80, 2012, doi: 10.4028/www.scientific.net/amr.535-537.77.

BibTeX

@article{chen2012research,
  title     = {{Research on the Structure and Friction Properties of the SiC Particles Reinforced Copper-Based Self-Lubricating Composites}},
  author    = {Chen, Suiyuan and Fan, Hong and An, Di and Liang, Jing and Liu, Chang Sheng},
  journal   = {Advanced materials research},
  year      = {2012},
  volume    = {535-537},
  pages     = {77--80},
  doi       = {10.4028/www.scientific.net/amr.535-537.77},
  url       = {https://doi.org/10.4028/www.scientific.net/amr.535-537.77}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Powder Metallurgy Techniques and Materials

  • self-lubricating composites
  • copper-based composites
  • SiC particle reinforcement
  • friction coefficient
  • wear resistance
  • sintering conditions
  • grain refinement
  • phase composition

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Chen, S., Fan, H., An, D., Liang, J., & Liu, C. S. (2012). Research on the Structure and Friction Properties of the SiC Particles Reinforced Copper-Based Self-Lubricating Composites. Advanced materials research, 535-537, 77–80. https://doi.org/10.4028/www.scientific.net/amr.535-537.77

How many times has this paper been cited?

2 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Advanced materials research: sign in and open the full text from this page.

Who wrote this paper?

Suiyuan Chen, Hong Fan, Di An, Jing Liang, Chang Sheng Liu.

What is the DOI of this paper?

10.4028/www.scientific.net/amr.535-537.77, permanently at https://doi.org/10.4028/www.scientific.net/amr.535-537.77. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.