Journal article · 2014 · Open access

Preparation and Wear Performance of Novel Graphite/Copper Alloy-Matrix Self-Lubricating Composite Materials

Suiyuan Chen, Xin Rong Li, Di An, Jing Liang, Chang Sheng Liu

Advanced materials research, 941-944, 284–287 · Published 1 June 2014 · DOI 10.4028/www.scientific.net/amr.941-944.284

Open full textCite this paper

In brief

“Preparation and Wear Performance of Novel Graphite/Copper Alloy-Matrix Self-Lubricating Composite Materials” is a 2014 journal article by Suiyuan Chen and 4 co-authors, published in Advanced materials research. OpenAlex counts 4 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Advanced materials research.

Citations
4
Most cited in
2015 (1)
Field-weighted impact
0.56
References
8
Authors
5

Abstract

A novel graphite/copper alloy-based self-lubricating composite materials were prepared using the powder metallurgy method by composing 663 bronze, Ni, W, nanoAl2O3, MoS2, Ag, CaF2, Sm2O3 as the basic alloy powder and adding 1wt.%, 1.5wt.%, 2wt.%, 2.5wt.%, 3wt.% graphite and nickel coated graphite powder respectively to the composite powder. The microstructure, mechanical properties and friction properties of the samples were studied. The results show that the samples with nickel coated graphite powder have their wettability and the composite structure between graphite and copper alloy matrix is improved. When the content of graphite is 3wt.%, the properties of samples prepared by Ni-coated graphite are improved compared with those prepared by uncoated graphite. The hardness is increased from 34HV to 38HV, the crushing strength is from 116MPa to 151MPa, the friction coefficient is reduced from 0.28 to 0.21, wear loss is reduced from 20mg to 12mg. The samples prepared by Ni-coated graphite have good self-lubricating performance.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Chen, S., Li, X. R., An, D., Liang, J., & Liu, C. S. (2014). Preparation and Wear Performance of Novel Graphite/Copper Alloy-Matrix Self-Lubricating Composite Materials. Advanced materials research, 941-944, 284–287. https://doi.org/10.4028/www.scientific.net/amr.941-944.284

MLA 9

Chen, Suiyuan, et al. “Preparation and Wear Performance of Novel Graphite/Copper Alloy-Matrix Self-Lubricating Composite Materials.” Advanced materials research, vol. 941-944, 2014, pp. 284–287. https://doi.org/10.4028/www.scientific.net/amr.941-944.284.

Chicago

Chen, Suiyuan, Xin Rong Li, Di An, Jing Liang, and Chang Sheng Liu. 2014. “Preparation and Wear Performance of Novel Graphite/Copper Alloy-Matrix Self-Lubricating Composite Materials.” Advanced materials research 941-944: 284–287. https://doi.org/10.4028/www.scientific.net/amr.941-944.284.

Harvard

Chen, S. et al. (2014) ‘Preparation and Wear Performance of Novel Graphite/Copper Alloy-Matrix Self-Lubricating Composite Materials’, Advanced materials research, 941-944, pp. 284–287. doi:10.4028/www.scientific.net/amr.941-944.284.

IEEE

S. Chen, X. R. Li, D. An, J. Liang, and C. S. Liu, “Preparation and Wear Performance of Novel Graphite/Copper Alloy-Matrix Self-Lubricating Composite Materials,” Advanced materials research, vol. 941-944, pp. 284–287, 2014, doi: 10.4028/www.scientific.net/amr.941-944.284.

BibTeX

@article{chen2014preparation,
  title     = {{Preparation and Wear Performance of Novel Graphite/Copper Alloy-Matrix Self-Lubricating Composite Materials}},
  author    = {Chen, Suiyuan and Li, Xin Rong and An, Di and Liang, Jing and Liu, Chang Sheng},
  journal   = {Advanced materials research},
  year      = {2014},
  volume    = {941-944},
  pages     = {284--287},
  doi       = {10.4028/www.scientific.net/amr.941-944.284},
  url       = {https://doi.org/10.4028/www.scientific.net/amr.941-944.284}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201511
201611
201811
201911

Its field-weighted citation impact is 0.56: it has been cited 0.56 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Tribology and Wear Analysis

  • self-lubricating composites
  • nickel-coated graphite
  • powder metallurgy
  • friction coefficient
  • wear loss
  • hardness
  • compressive strength
  • wettability

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Chen, S., Li, X. R., An, D., Liang, J., & Liu, C. S. (2014). Preparation and Wear Performance of Novel Graphite/Copper Alloy-Matrix Self-Lubricating Composite Materials. Advanced materials research, 941-944, 284–287. https://doi.org/10.4028/www.scientific.net/amr.941-944.284

How many times has this paper been cited?

4 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Advanced materials research: sign in and open the full text from this page.

Who wrote this paper?

Suiyuan Chen, Xin Rong Li, Di An, Jing Liang, Chang Sheng Liu.

What is the DOI of this paper?

10.4028/www.scientific.net/amr.941-944.284, permanently at https://doi.org/10.4028/www.scientific.net/amr.941-944.284. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.