Journal article · 2025 · Open access

Performing Comparative Analysis on Additive Manufactured Hybrid Strut-Based Metamaterials on the Basis of Specific Energy Absorption

Akshansh Mishra, Vijaykumar S. Jatti, Dhruv Abhijeet Sawant, Eyob Messele Sefene, A. Saiyathibrahim, Dhanesh G. Mohan

Advances in Materials Science, 25(2), 52–72 · Published 1 June 2025 · DOI 10.2478/adms-2025-0010

Open full textCite this paper

In brief

“Performing Comparative Analysis on Additive Manufactured Hybrid Strut-Based Metamaterials on the Basis of Specific Energy Absorption” is a 2025 journal article by Akshansh Mishra and 5 co-authors, published in Advances in Materials Science. OpenAlex counts 1 citations as of 22 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at Advances in Materials Science.

Citations
1
Most cited in
2026 (1)
Field-weighted impact
0.23
References
29
Authors
6

Abstract

Architected metamaterials utilize unique geometries to enhance the mechanical and physical properties of structures. This study investigates the energy absorption capabilities of additively manufactured hybrid strut-based metamaterials, produced using Fused Deposition Modeling (FDM) with Polylactic Acid (PLA). Compression tests were conducted on six novel hybrid strut lattice designs to analyze their structure-property relationships. The designs integrated Kelvin cells, edge struts, octagonal shapes, hex trusses, face-centered components, and corner diagonal struts. The combination of “Kelvin Cell + Octagon” achieved excellent energy absorption efficiency, with the highest Specific Energy Absorption (SEA) of 1450 kJ/kg. Through the synergistic effect of octagonal geometry and Kelvin cell structure, controlled deformation and delayed buckling are realized to release the energy fully and maximize stress wave interaction. However, the configuration of the “Edge Struts + Hex Truss” configuration was not far away either, exhibiting an SEA of 1388.89 kJ/kg, owing to the effective load distribution provided by the hexagonal truss structure. Other configurations had much lower SEA values: 275 kJ/kg for “Kelvin Cell + Hex Truss” 185.71 kJ/kg for “Kelvin Cell + Edge Struts” 162.5 kJ/kg for “Edge Struts + Corner Diagonal” and 26.67 kJ/kg for “Edge Struts + Face Centre”. Using microscopy to look at failed samples showed that shapes with hexagonal and octagonal parts increased SEA by making stress distribution more even and limiting deformation during compression. The unit cell geometry is the critical factor for deciding upon the energy absorption capacity of metamaterials. This work provides useful insights to design optimized additively manufactured metamaterials to achieve high energy absorption, which will be useful to applications such as automotive crash protection, aerospace components, personal protective equipment, and vibration damping systems. The “Kelvin Cell + Octagon” and “Edge Struts + Hex Truss” configurations emerge as highly effective designs, balancing strength, ductility, and energy absorption efficiency for advanced engineering applications.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Mishra, A., Jatti, V. S., Sawant, D. A., Sefene, E. M., Saiyathibrahim, A., & Mohan, D. G. (2025). Performing Comparative Analysis on Additive Manufactured Hybrid Strut-Based Metamaterials on the Basis of Specific Energy Absorption. Advances in Materials Science, 25(2), 52–72. https://doi.org/10.2478/adms-2025-0010

MLA 9

Mishra, Akshansh, et al. “Performing Comparative Analysis on Additive Manufactured Hybrid Strut-Based Metamaterials on the Basis of Specific Energy Absorption.” Advances in Materials Science, vol. 25, no. 2, 2025, pp. 52–72. https://doi.org/10.2478/adms-2025-0010.

Chicago

Mishra, Akshansh, Vijaykumar S. Jatti, Dhruv Abhijeet Sawant, Eyob Messele Sefene, A. Saiyathibrahim, and Dhanesh G. Mohan. 2025. “Performing Comparative Analysis on Additive Manufactured Hybrid Strut-Based Metamaterials on the Basis of Specific Energy Absorption.” Advances in Materials Science 25 (2): 52–72. https://doi.org/10.2478/adms-2025-0010.

Harvard

Mishra, A. et al. (2025) ‘Performing Comparative Analysis on Additive Manufactured Hybrid Strut-Based Metamaterials on the Basis of Specific Energy Absorption’, Advances in Materials Science, 25(2), pp. 52–72. doi:10.2478/adms-2025-0010.

IEEE

A. Mishra, V. S. Jatti, D. A. Sawant, E. M. Sefene, A. Saiyathibrahim, and D. G. Mohan, “Performing Comparative Analysis on Additive Manufactured Hybrid Strut-Based Metamaterials on the Basis of Specific Energy Absorption,” Advances in Materials Science, vol. 25, no. 2, pp. 52–72, 2025, doi: 10.2478/adms-2025-0010.

BibTeX

@article{mishra2025performing,
  title     = {{Performing Comparative Analysis on Additive Manufactured Hybrid Strut-Based Metamaterials on the Basis of Specific Energy Absorption}},
  author    = {Mishra, Akshansh and Jatti, Vijaykumar S. and Sawant, Dhruv Abhijeet and Sefene, Eyob Messele and Saiyathibrahim, A. and Mohan, Dhanesh G.},
  journal   = {Advances in Materials Science},
  year      = {2025},
  volume    = {25},
  number    = {2},
  pages     = {52--72},
  doi       = {10.2478/adms-2025-0010},
  url       = {https://doi.org/10.2478/adms-2025-0010}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Cellular and Composite Structures

  • architected metamaterials
  • specific energy absorption
  • energy absorption
  • Kelvin cell
  • octagonal lattice
  • unit cell geometry
  • buckling
  • stress wave interaction

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Mishra, A., Jatti, V. S., Sawant, D. A., Sefene, E. M., Saiyathibrahim, A., & Mohan, D. G. (2025). Performing Comparative Analysis on Additive Manufactured Hybrid Strut-Based Metamaterials on the Basis of Specific Energy Absorption. Advances in Materials Science, 25(2), 52–72. https://doi.org/10.2478/adms-2025-0010

How many times has this paper been cited?

1 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Advances in Materials Science: sign in and open the full text from this page.

Who wrote this paper?

Akshansh Mishra, Vijaykumar S. Jatti, Dhruv Abhijeet Sawant, Eyob Messele Sefene, A. Saiyathibrahim, Dhanesh G. Mohan.

What is the DOI of this paper?

10.2478/adms-2025-0010, permanently at https://doi.org/10.2478/adms-2025-0010. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.