Paper · 2026 · Open access
Optimal Design and Additive Manufacturing of Polymeric Metamaterials for Energy Absorption and Impact Mitigation
Key engineering materials, 1047, 213–221 · Published 13 April 2026 · DOI 10.4028/p-kruyo9
In brief
“Optimal Design and Additive Manufacturing of Polymeric Metamaterials for Energy Absorption and Impact Mitigation” is a 2026 paper by Víctor D. Fachinotti and 2 co-authors, published in Key engineering materials. OpenAlex counts 0 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Key engineering materials.
- Citations
- 0
- References
- 9
- Authors
- 3
Abstract
Architected metamaterials fabricated by additive manufacturing offer deterministic geometries and tunable mechanical properties that can outperform conventional foams in energy absorption and impact mitigation. In this work, origami honeycomb and plate-lattice metamaterial concepts are unified within a common, quantitatively characterised metamaterial. An optimization-based design approach is employed to maximise absorbed energy while keeping the peak stress below a predefined threshold, using metamaterial geometric parameters as design variables. The objective function is evaluated through post-processing of Abaqus compression simulations on automatically generated designs. Owing to the high computational cost, the optimisation is performed using an evolutionary algorithm with a limited number of evaluations, yielding a best-performing design rather than a global optimum. Despite this limitation, the results elucidate the critical roles of buckling in limiting initial peak stress and of contact in enhancing post-peak energy absorption, and they highlight the significant potential for further performance gains through expanded design space exploration.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Fachinotti, V. D., Andreassen, E., & Gouttebroze, S. (2026). Optimal Design and Additive Manufacturing of Polymeric Metamaterials for Energy Absorption and Impact Mitigation. Key engineering materials, 1047, 213–221. https://doi.org/10.4028/p-kruyo9
MLA 9
Fachinotti, Víctor D., et al. “Optimal Design and Additive Manufacturing of Polymeric Metamaterials for Energy Absorption and Impact Mitigation.” Key engineering materials, vol. 1047, 2026, pp. 213–221. https://doi.org/10.4028/p-kruyo9.
Chicago
Fachinotti, Víctor D., Erik Andreassen, and Sylvain Gouttebroze. 2026. “Optimal Design and Additive Manufacturing of Polymeric Metamaterials for Energy Absorption and Impact Mitigation.” Key engineering materials 1047: 213–221. https://doi.org/10.4028/p-kruyo9.
Harvard
Fachinotti, V. D., Andreassen, E. and Gouttebroze, S. (2026) ‘Optimal Design and Additive Manufacturing of Polymeric Metamaterials for Energy Absorption and Impact Mitigation’, Key engineering materials, 1047, pp. 213–221. doi:10.4028/p-kruyo9.
IEEE
V. D. Fachinotti, E. Andreassen, and S. Gouttebroze, “Optimal Design and Additive Manufacturing of Polymeric Metamaterials for Energy Absorption and Impact Mitigation,” Key engineering materials, vol. 1047, pp. 213–221, 2026, doi: 10.4028/p-kruyo9.
BibTeX
@article{fachinotti2026optimal,
title = {{Optimal Design and Additive Manufacturing of Polymeric Metamaterials for Energy Absorption and Impact Mitigation}},
author = {Fachinotti, Víctor D. and Andreassen, Erik and Gouttebroze, Sylvain},
journal = {Key engineering materials},
year = {2026},
volume = {1047},
pages = {213--221},
doi = {10.4028/p-kruyo9},
url = {https://doi.org/10.4028/p-kruyo9}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Cellular and Composite Structures
- architected metamaterials
- energy absorption
- impact mitigation
- plate lattices
- geometry optimization
- buckling
- contact mechanics
- evolutionary algorithms
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Fachinotti, V. D., Andreassen, E., & Gouttebroze, S. (2026). Optimal Design and Additive Manufacturing of Polymeric Metamaterials for Energy Absorption and Impact Mitigation. Key engineering materials, 1047, 213–221. https://doi.org/10.4028/p-kruyo9
How many times has this paper been cited?
0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Key engineering materials: sign in and open the PDF from this page.
Who wrote this paper?
Víctor D. Fachinotti, Erik Andreassen, Sylvain Gouttebroze.
What is the DOI of this paper?
10.4028/p-kruyo9, permanently at https://doi.org/10.4028/p-kruyo9. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.