Journal article · 2025 · Open access

Mutually enhanced mechanical and tribological properties in magnetron sputtered Mo2N/Ag-SiNx self-lubricating multilayered films via epitaxial growth design

Jing Luan, Lei Wang, Songtao Dong, Filipe Fernandes, Andrei Choukourov, Junfeng Yang, Mitjan Kalin, A. Cavaleiro, Hongbo Ju

Ceramics International, 51(25), 43924–43932 · Published 15 July 2025 · DOI 10.1016/j.ceramint.2025.07.123

Open full textCite this paper

In brief

“Mutually enhanced mechanical and tribological properties in magnetron sputtered Mo2N/Ag-SiNx self-lubricating multilayered films via epitaxial growth design” is a 2025 journal article by Jing Luan and 8 co-authors, published in Ceramics International. OpenAlex counts 10 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Ceramics International.

Citations
10
Most cited in
2026 (9)
Field-weighted impact
2.63
References
52
Authors
9

Abstract

: Achieving simultaneous enhancement of both mechanical and self-lubricating properties by incorporating soft lubricants into nitride films has been a longstanding challenge in the development of solid lubricant materials. This paper introduced a novel approach to overcome this challenge by developing coherent-structured Mo 2 N/Ag-SiN x multilayered films using radio frequency (RF) magnetron sputtering. The multilayer films were designed with a fixed modulation period of 30 nm, while the modulation ratio (γ) was varied from 1:9 to 1:1. The Mo 2 N layers exhibited a single fcc-Mo 2 N phase, while the Ag-SiN x layers formed a dual-phase structure comprising fcc-Ag nanoparticles embedded in an amorphous SiN x matrix. At a modulation ratio of 1:9, the Ag-SiN x layer epitaxially grew on the Mo 2 N template, resulting in a coherent structure. This coherent structure significantly enhanced both the hardness and elastic modulus, reaching approximately 36 GPa and 230 GPa, respectively. The improved wear resistance at room temperature can be attributed to the coherent strengthening effect, which not only elevated the film’s hardness but also eliminated sharp interfaces between modulation layers, thereby reducing crack initiation sites. In temperature-cycling tribo-testing from room temperature to 600 °C, the film with a γ of 1:9 maintained a stable coefficient of friction around 0.2, except during the initial room temperature, where it was 0.4. The wear rate could not be accurately calculated due to the adhered tribolayer on the top of the wear track following the initial tribo-test at 600 °C. The excellent tribological properties across temperature cycles were attributed to the synergistic lubricant characteristics of both layers and the formation of self-lubricating tribo-phases. The optimized Mo 2 N/Ag-SiN x multilayered films provide an effective balance of lubrication and mechanical stability under extreme conditions, making them highly promising for high-performance engineering applications.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Luan, J., Wang, L., Dong, S., Fernandes, F., Choukourov, A., Yang, J., Kalin, M., Cavaleiro, A., & Ju, H. (2025). Mutually enhanced mechanical and tribological properties in magnetron sputtered Mo2N/Ag-SiNx self-lubricating multilayered films via epitaxial growth design. Ceramics International, 51(25), 43924–43932. https://doi.org/10.1016/j.ceramint.2025.07.123

MLA 9

Luan, Jing, et al. “Mutually enhanced mechanical and tribological properties in magnetron sputtered Mo2N/Ag-SiNx self-lubricating multilayered films via epitaxial growth design.” Ceramics International, vol. 51, no. 25, 2025, pp. 43924–43932. https://doi.org/10.1016/j.ceramint.2025.07.123.

Chicago

Luan, Jing, Lei Wang, Songtao Dong, Filipe Fernandes, Andrei Choukourov, Junfeng Yang, Mitjan Kalin, A. Cavaleiro, and Hongbo Ju. 2025. “Mutually enhanced mechanical and tribological properties in magnetron sputtered Mo2N/Ag-SiNx self-lubricating multilayered films via epitaxial growth design.” Ceramics International 51 (25): 43924–43932. https://doi.org/10.1016/j.ceramint.2025.07.123.

Harvard

Luan, J. et al. (2025) ‘Mutually enhanced mechanical and tribological properties in magnetron sputtered Mo2N/Ag-SiNx self-lubricating multilayered films via epitaxial growth design’, Ceramics International, 51(25), pp. 43924–43932. doi:10.1016/j.ceramint.2025.07.123.

IEEE

J. Luan et al., “Mutually enhanced mechanical and tribological properties in magnetron sputtered Mo2N/Ag-SiNx self-lubricating multilayered films via epitaxial growth design,” Ceramics International, vol. 51, no. 25, pp. 43924–43932, 2025, doi: 10.1016/j.ceramint.2025.07.123.

BibTeX

@article{luan2025mutually,
  title     = {{Mutually enhanced mechanical and tribological properties in magnetron sputtered Mo2N/Ag-SiNx self-lubricating multilayered films via epitaxial growth design}},
  author    = {Luan, Jing and Wang, Lei and Dong, Songtao and Fernandes, Filipe and Choukourov, Andrei and Yang, Junfeng and Kalin, Mitjan and Cavaleiro, A. and Ju, Hongbo},
  journal   = {Ceramics International},
  year      = {2025},
  volume    = {51},
  number    = {25},
  pages     = {43924--43932},
  doi       = {10.1016/j.ceramint.2025.07.123},
  url       = {https://doi.org/10.1016/j.ceramint.2025.07.123}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • self-lubricating coatings
  • solid lubrication
  • epitaxial growth
  • coherent structures
  • modulation ratio
  • silver nanoparticles
  • hardness and elastic modulus
  • wear resistance

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Luan, J., Wang, L., Dong, S., Fernandes, F., Choukourov, A., Yang, J., Kalin, M., Cavaleiro, A., & Ju, H. (2025). Mutually enhanced mechanical and tribological properties in magnetron sputtered Mo2N/Ag-SiNx self-lubricating multilayered films via epitaxial growth design. Ceramics International, 51(25), 43924–43932. https://doi.org/10.1016/j.ceramint.2025.07.123

How many times has this paper been cited?

10 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Ceramics International: sign in and open the full text from this page.

Who wrote this paper?

Jing Luan, Lei Wang, Songtao Dong, Filipe Fernandes, Andrei Choukourov, Junfeng Yang, Mitjan Kalin, A. Cavaleiro, Hongbo Ju.

What is the DOI of this paper?

10.1016/j.ceramint.2025.07.123, permanently at https://doi.org/10.1016/j.ceramint.2025.07.123. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.