Journal article · 2014 · Open access

Microstructural evaluation on shape recovery in stainless Fe-Mn-Si-Cr-Ni-Co SMA processed by wire drawing

Elaine Cristina Andrade, Heide Heloise Bernardi, Jorge Otubo

Materials Research, 17(3), 583–587 · Published 30 May 2014 · DOI 10.1590/s1516-14392014005000072

Open PDFView at the publisherCite this paper

In brief

“Microstructural evaluation on shape recovery in stainless Fe-Mn-Si-Cr-Ni-Co SMA processed by wire drawing” is a 2014 journal article by Elaine Cristina Andrade and 2 co-authors, published in Materials Research. OpenAlex counts 6 citations as of 22 November 2026. It is open access under a CC BY-NC licence: the full text is free to read at Materials Research.

Citations
6
Most cited in
2018 (3)
Field-weighted impact
0.12
References
12
Authors
3

Abstract

The effect of the microstructure on the shape recovery in stainless Fe-8Mn-5Si-13Cr-6Ni-12Co shape memory steel (SSMS) was evaluated using tensile tests and reversion temperature of 600ºC for a pre-strain of 4%. The tests were performed for a solution treated and annealed conditions at different temperatures after wire drawing of 57% area reduction. The best total shape recovery (TSR) was 83% for a sample deformed and annealed at 850ºC. It was concluded that the elastic (or, superelastic) shape recovery (ESR) is high when the austenitic matrix strength is high surpassing the value of shape recovery due to memory effect (SR) and once the austenitic matrix becomes softer, the contribution of SR increases and that of ESR decreases.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Andrade, E. C., Bernardi, H. H., & Otubo, J. (2014). Microstructural evaluation on shape recovery in stainless Fe-Mn-Si-Cr-Ni-Co SMA processed by wire drawing. Materials Research, 17(3), 583–587. https://doi.org/10.1590/s1516-14392014005000072

MLA 9

Andrade, Elaine Cristina, et al. “Microstructural evaluation on shape recovery in stainless Fe-Mn-Si-Cr-Ni-Co SMA processed by wire drawing.” Materials Research, vol. 17, no. 3, 2014, pp. 583–587. https://doi.org/10.1590/s1516-14392014005000072.

Chicago

Andrade, Elaine Cristina, Heide Heloise Bernardi, and Jorge Otubo. 2014. “Microstructural evaluation on shape recovery in stainless Fe-Mn-Si-Cr-Ni-Co SMA processed by wire drawing.” Materials Research 17 (3): 583–587. https://doi.org/10.1590/s1516-14392014005000072.

Harvard

Andrade, E. C., Bernardi, H. H. and Otubo, J. (2014) ‘Microstructural evaluation on shape recovery in stainless Fe-Mn-Si-Cr-Ni-Co SMA processed by wire drawing’, Materials Research, 17(3), pp. 583–587. doi:10.1590/s1516-14392014005000072.

IEEE

E. C. Andrade, H. H. Bernardi, and J. Otubo, “Microstructural evaluation on shape recovery in stainless Fe-Mn-Si-Cr-Ni-Co SMA processed by wire drawing,” Materials Research, vol. 17, no. 3, pp. 583–587, 2014, doi: 10.1590/s1516-14392014005000072.

BibTeX

@article{andrade2014microstructural,
  title     = {{Microstructural evaluation on shape recovery in stainless Fe-Mn-Si-Cr-Ni-Co SMA processed by wire drawing}},
  author    = {Andrade, Elaine Cristina and Bernardi, Heide Heloise and Otubo, Jorge},
  journal   = {Materials Research},
  year      = {2014},
  volume    = {17},
  number    = {3},
  pages     = {583--587},
  doi       = {10.1590/s1516-14392014005000072},
  url       = {https://doi.org/10.1590/s1516-14392014005000072}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201711
201833
202311
202511

Its field-weighted citation impact is 0.12: it has been cited 0.12 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › Shape Memory Alloy Transformations

  • shape memory alloys
  • shape recovery
  • microstructure
  • wire drawing
  • annealing temperature
  • superelasticity
  • memory effects
  • solution treatment

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Andrade, E. C., Bernardi, H. H., & Otubo, J. (2014). Microstructural evaluation on shape recovery in stainless Fe-Mn-Si-Cr-Ni-Co SMA processed by wire drawing. Materials Research, 17(3), 583–587. https://doi.org/10.1590/s1516-14392014005000072

How many times has this paper been cited?

6 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Materials Research: sign in and open the PDF from this page.

Who wrote this paper?

Elaine Cristina Andrade, Heide Heloise Bernardi, Jorge Otubo.

What is the DOI of this paper?

10.1590/s1516-14392014005000072, permanently at https://doi.org/10.1590/s1516-14392014005000072. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.