Journal article · 2018 · Open access

The Influence of Microstructure and Mechanical Resistance on the Shape Memory of Ecae Processed Stainless Fe-Mn-Si-Cr-Ni-Co Steel

Karine Andrea Käfer, Heide Heloise Bernardi, Osmar de Sousa Santos, Larissa Otubo, Nelson Batista de Lima, Jorge Otubo

Materials Research, 21(5) · Published 9 August 2018 · DOI 10.1590/1980-5373-mr-2017-0958

Open PDFView at the publisherCite this paper

In brief

“The Influence of Microstructure and Mechanical Resistance on the Shape Memory of Ecae Processed Stainless Fe-Mn-Si-Cr-Ni-Co Steel” is a 2018 journal article by Karine Andrea Käfer and 5 co-authors, published in Materials Research. OpenAlex counts 4 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Materials Research.

Citations
4
Most cited in
2023 (3)
Field-weighted impact
0.08
References
27
Authors
6

Abstract

In the current work, XRD, SEM, EBSD and TEM techniques were used to evaluate the microstructure of stainless Fe-Mn-Si-Cr-Ni-Co shape memory steel processed by ECAE and annealed for one hour at temperatures ranging from 650ºC to 950ºC. The results were then correlated with the mechanical and shape-memory properties of the steel. It was observed that the samples containing large grains and a microstructure free of defects or precipitates presented a high volume fraction of multi-variant thermal martensite and stress-induced martensite, resulting in good shape recovery, owing to the memory effect. The grain refinement and precipitation of second-phase particles decreased the volume fraction and number of martensite variants and considerably increased the mechanical resistance, enhancing the elastic shape recovery. It was shown that shape memory properties were essentially related to the mechanical resistance of the matrix, which in turn was related to the microstructure.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Käfer, K. A., Bernardi, H. H., Santos, O. D. S., Otubo, L., de Lima, N. B., & Otubo, J. (2018). The Influence of Microstructure and Mechanical Resistance on the Shape Memory of Ecae Processed Stainless Fe-Mn-Si-Cr-Ni-Co Steel. Materials Research, 21(5). https://doi.org/10.1590/1980-5373-mr-2017-0958

MLA 9

Käfer, Karine Andrea, et al. “The Influence of Microstructure and Mechanical Resistance on the Shape Memory of Ecae Processed Stainless Fe-Mn-Si-Cr-Ni-Co Steel.” Materials Research, vol. 21, no. 5, 2018. https://doi.org/10.1590/1980-5373-mr-2017-0958.

Chicago

Käfer, Karine Andrea, Heide Heloise Bernardi, Osmar de Sousa Santos, Larissa Otubo, Nelson Batista de Lima, and Jorge Otubo. 2018. “The Influence of Microstructure and Mechanical Resistance on the Shape Memory of Ecae Processed Stainless Fe-Mn-Si-Cr-Ni-Co Steel.” Materials Research 21 (5). https://doi.org/10.1590/1980-5373-mr-2017-0958.

Harvard

Käfer, K. A. et al. (2018) ‘The Influence of Microstructure and Mechanical Resistance on the Shape Memory of Ecae Processed Stainless Fe-Mn-Si-Cr-Ni-Co Steel’, Materials Research, 21(5). doi:10.1590/1980-5373-mr-2017-0958.

IEEE

K. A. Käfer, H. H. Bernardi, O. D. S. Santos, L. Otubo, N. B. de Lima, and J. Otubo, “The Influence of Microstructure and Mechanical Resistance on the Shape Memory of Ecae Processed Stainless Fe-Mn-Si-Cr-Ni-Co Steel,” Materials Research, vol. 21, no. 5, 2018, doi: 10.1590/1980-5373-mr-2017-0958.

BibTeX

@article{kafer2018influence,
  title     = {{The Influence of Microstructure and Mechanical Resistance on the Shape Memory of Ecae Processed Stainless Fe-Mn-Si-Cr-Ni-Co Steel}},
  author    = {Käfer, Karine Andrea and Bernardi, Heide Heloise and Santos, Osmar de Sousa and Otubo, Larissa and de Lima, Nelson Batista and Otubo, Jorge},
  journal   = {Materials Research},
  year      = {2018},
  volume    = {21},
  number    = {5},
  doi       = {10.1590/1980-5373-mr-2017-0958},
  url       = {https://doi.org/10.1590/1980-5373-mr-2017-0958}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › Shape Memory Alloy Transformations

  • shape memory effect
  • equal channel angular pressing
  • microstructure
  • mechanical properties
  • stress-induced martensite
  • martensite variants
  • grain refinement
  • secondary phase precipitation

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Käfer, K. A., Bernardi, H. H., Santos, O. D. S., Otubo, L., de Lima, N. B., & Otubo, J. (2018). The Influence of Microstructure and Mechanical Resistance on the Shape Memory of Ecae Processed Stainless Fe-Mn-Si-Cr-Ni-Co Steel. Materials Research, 21(5). https://doi.org/10.1590/1980-5373-mr-2017-0958

How many times has this paper been cited?

4 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Materials Research: sign in and open the PDF from this page.

Who wrote this paper?

Karine Andrea Käfer, Heide Heloise Bernardi, Osmar de Sousa Santos, Larissa Otubo, Nelson Batista de Lima, Jorge Otubo.

What is the DOI of this paper?

10.1590/1980-5373-mr-2017-0958, permanently at https://doi.org/10.1590/1980-5373-mr-2017-0958. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.