Journal article · 2007 · Open access

Friction of Self-Lubricating W-S-C Sputtered Coatings Sliding Under Increasing Load

Tomáš Polcar, Manuel Evaristo, A. Cavaleiro

Plasma Processes and Polymers, 4(S1), S541–S546 · Published 1 April 2007 · DOI 10.1002/ppap.200731402

Open PDFView at the publisherCite this paper

In brief

“Friction of Self-Lubricating W-S-C Sputtered Coatings Sliding Under Increasing Load” is a 2007 journal article by Tomáš Polcar and 2 co-authors, published in Plasma Processes and Polymers. OpenAlex counts 48 citations as of 17 November 2026. It is open access: the full text is free to read at Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT).

Citations
48
Most cited in
2015 (6)
Field-weighted impact
4.15
References
14
Authors
3

Abstract

W-S-C films were deposited by non-reactive magnetron sputtering from a carbon target with several pellets of WS2 incrusted in the zone of the preferential erosion. The number of the pellets was changed to modify the carbon content in the films, which varied from 26 up to 70 at.-%. Alloying W-S films with carbon led to a substantial increase in the hardness in the range of 4–10 GPa; the maximum hardness was obtained for the coatings with carbon contents close to 40 at.-%. XRD diffraction patterns showed that there was a loss of crystallinity with the increase of the carbon content in the film. C-contents in the range (37–66 at.-%) were selected for sliding tests (pin-on-disk, 100Cr6 steel ball as a counterpart) carried out in humid air under increasing contact load. The friction coefficient was observed to decrease continuously with increasing load. The wear tracks and wear debris were also analyzed by Raman spectroscopy to understand the structural transformations induced by the increasing load. The friction results were compared with existing models for pure transition metal dichalcogenides (TMD), and it could be concluded that the friction mechanisms of W-S-C coatings fundamentally differ from those of pure TMD.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Polcar, T., Evaristo, M., & Cavaleiro, A. (2007). Friction of Self-Lubricating W-S-C Sputtered Coatings Sliding Under Increasing Load. Plasma Processes and Polymers, 4(S1), S541–S546. https://doi.org/10.1002/ppap.200731402

MLA 9

Polcar, Tomáš, et al. “Friction of Self-Lubricating W-S-C Sputtered Coatings Sliding Under Increasing Load.” Plasma Processes and Polymers, vol. 4, no. S1, 2007, pp. S541–S546. https://doi.org/10.1002/ppap.200731402.

Chicago

Polcar, Tomáš, Manuel Evaristo, and A. Cavaleiro. 2007. “Friction of Self-Lubricating W-S-C Sputtered Coatings Sliding Under Increasing Load.” Plasma Processes and Polymers 4 (S1): S541–S546. https://doi.org/10.1002/ppap.200731402.

Harvard

Polcar, T., Evaristo, M. and Cavaleiro, A. (2007) ‘Friction of Self-Lubricating W-S-C Sputtered Coatings Sliding Under Increasing Load’, Plasma Processes and Polymers, 4(S1), pp. S541–S546. doi:10.1002/ppap.200731402.

IEEE

T. Polcar, M. Evaristo, and A. Cavaleiro, “Friction of Self-Lubricating W-S-C Sputtered Coatings Sliding Under Increasing Load,” Plasma Processes and Polymers, vol. 4, no. S1, pp. S541–S546, 2007, doi: 10.1002/ppap.200731402.

BibTeX

@article{polcar2007friction,
  title     = {{Friction of Self-Lubricating W-S-C Sputtered Coatings Sliding Under Increasing Load}},
  author    = {Polcar, Tomáš and Evaristo, Manuel and Cavaleiro, A.},
  journal   = {Plasma Processes and Polymers},
  year      = {2007},
  volume    = {4},
  number    = {S1},
  pages     = {S541--S546},
  doi       = {10.1002/ppap.200731402},
  url       = {https://doi.org/10.1002/ppap.200731402}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201433
201566
201622
201822
201944
202055
202155
202422
202522
202611

Its field-weighted citation impact is 4.15: it has been cited 4.15 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • tungsten disulfide
  • self-lubricating coatings
  • friction coefficient
  • load-dependent friction
  • carbon content
  • hardness
  • crystallinity loss
  • wear tracks

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Polcar, T., Evaristo, M., & Cavaleiro, A. (2007). Friction of Self-Lubricating W-S-C Sputtered Coatings Sliding Under Increasing Load. Plasma Processes and Polymers, 4(S1), S541–S546. https://doi.org/10.1002/ppap.200731402

How many times has this paper been cited?

48 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT): sign in and open the PDF from this page.

Who wrote this paper?

Tomáš Polcar, Manuel Evaristo, A. Cavaleiro.

What is the DOI of this paper?

10.1002/ppap.200731402, permanently at https://doi.org/10.1002/ppap.200731402. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.