Journal article · 2020 · Open access

Synthesis, Microstructural, and Mechano-Tribological Properties of Self-Lubricating W-S-C(H) Thin Films Deposited by Different RF Magnetron Sputtering Procedures

Todor Vuchkov, Talha Bin Yaqub, Manuel Evaristo, A. Cavaleiro

Coatings, 10(3), 272 · Published 14 March 2020 · DOI 10.3390/coatings10030272

Free PDFView at the publisherCite this paper

In brief

“Synthesis, Microstructural, and Mechano-Tribological Properties of Self-Lubricating W-S-C(H) Thin Films Deposited by Different RF Magnetron Sputtering Procedures” is a 2020 journal article by Todor Vuchkov and 3 co-authors, published in Coatings. OpenAlex counts 16 citations as of 16 November 2026. It is open access under a CC BY licence: the full text is free to read at Coatings.

Citations
16
Most cited in
2022 (6)
Field-weighted impact
1.42
References
40
Authors
4

Abstract

Carbon-alloyed transition metal dichalcogenide (TMD) coatings have great potential for providing a good tribological response in diverse operating environments. There are different ways to synthesize these coatings by magnetron sputtering, with no clear indication of the best possible route for potential upscaling. In this study, tungsten-sulfur-carbon (W-S-C) coatings were deposited by radio frequency (RF) magnetron sputtering via four different methods. All coatings were sub-stoichiometric in terms of the S/W ratio, with the bombardment of the growing film with backscattered Ar neutrals being the main mechanism governing the S/W ratio. The crystallinity of the films was dependent on the C and S contents. X-ray photoelectron spectroscopy (XPS) revealed W-S and W-C bonding in all coatings. Raman spectroscopy showed the presence of an a-C phase with predominant sp2 bonding. The hardness of the coatings may be related to the C content and the S/W ratio. A friction coefficient of 0.06–0.08 was achieved during sliding in ambient air by the coatings deposited in non-reactive mode with optimal C contents. The results indicate that sputtering in non-reactive mode should be the method of choice for synthesis of these coatings.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Vuchkov, T., Bin Yaqub, T., Evaristo, M., & Cavaleiro, A. (2020). Synthesis, Microstructural, and Mechano-Tribological Properties of Self-Lubricating W-S-C(H) Thin Films Deposited by Different RF Magnetron Sputtering Procedures. Coatings, 10(3), 272. https://doi.org/10.3390/coatings10030272

MLA 9

Vuchkov, Todor, et al. “Synthesis, Microstructural, and Mechano-Tribological Properties of Self-Lubricating W-S-C(H) Thin Films Deposited by Different RF Magnetron Sputtering Procedures.” Coatings, vol. 10, no. 3, 2020, p. 272. https://doi.org/10.3390/coatings10030272.

Chicago

Vuchkov, Todor, Talha Bin Yaqub, Manuel Evaristo, and A. Cavaleiro. 2020. “Synthesis, Microstructural, and Mechano-Tribological Properties of Self-Lubricating W-S-C(H) Thin Films Deposited by Different RF Magnetron Sputtering Procedures.” Coatings 10 (3): 272. https://doi.org/10.3390/coatings10030272.

Harvard

Vuchkov, T. et al. (2020) ‘Synthesis, Microstructural, and Mechano-Tribological Properties of Self-Lubricating W-S-C(H) Thin Films Deposited by Different RF Magnetron Sputtering Procedures’, Coatings, 10(3), p. 272. doi:10.3390/coatings10030272.

IEEE

T. Vuchkov, T. Bin Yaqub, M. Evaristo, and A. Cavaleiro, “Synthesis, Microstructural, and Mechano-Tribological Properties of Self-Lubricating W-S-C(H) Thin Films Deposited by Different RF Magnetron Sputtering Procedures,” Coatings, vol. 10, no. 3, p. 272, 2020, doi: 10.3390/coatings10030272.

BibTeX

@article{vuchkov2020synthesis,
  title     = {{Synthesis, Microstructural, and Mechano-Tribological Properties of Self-Lubricating W-S-C(H) Thin Films Deposited by Different RF Magnetron Sputtering Procedures}},
  author    = {Vuchkov, Todor and Bin Yaqub, Talha and Evaristo, Manuel and Cavaleiro, A.},
  journal   = {Coatings},
  year      = {2020},
  volume    = {10},
  number    = {3},
  pages     = {272},
  doi       = {10.3390/coatings10030272},
  url       = {https://doi.org/10.3390/coatings10030272}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202033
202111
202266
202322
202511
202633

Its field-weighted citation impact is 1.42: it has been cited 1.42 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • transition metal dichalcogenides
  • RF magnetron sputtering
  • sp2 bonding
  • hardness
  • friction coefficient
  • tribological properties
  • microstructure
  • carbon content

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Vuchkov, T., Bin Yaqub, T., Evaristo, M., & Cavaleiro, A. (2020). Synthesis, Microstructural, and Mechano-Tribological Properties of Self-Lubricating W-S-C(H) Thin Films Deposited by Different RF Magnetron Sputtering Procedures. Coatings, 10(3), 272. https://doi.org/10.3390/coatings10030272

How many times has this paper been cited?

16 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at Coatings.

Who wrote this paper?

Todor Vuchkov, Talha Bin Yaqub, Manuel Evaristo, A. Cavaleiro.

What is the DOI of this paper?

10.3390/coatings10030272. The permanent link is https://doi.org/10.3390/coatings10030272.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.