Journal article · 2025 · Open access
Evaluation of sigma and laves phases in a niobium modified austenitic-ferritic stainless steel using FactSage software
Matéria (Rio de Janeiro), 30, e20250241 · Published 1 January 2025 · DOI 10.1590/1517-7076-rmat-2025-0241
In brief
“Evaluation of sigma and laves phases in a niobium modified austenitic-ferritic stainless steel using FactSage software” is a 2025 journal article by André Itman Filho and 3 co-authors, published in Matéria (Rio de Janeiro). OpenAlex counts 0 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Matéria (Rio de Janeiro).
- Citations
- 0
- References
- 18
- Authors
- 4
Abstract
In austenitic-ferritic or duplex stainless steels, the microstructure is basically determined by the chromium and nickel contents, which are ferritic or austenitic phases stabilizers. Currently, duplex stainless steels are used to replace austenitic stainless steels in industrial applications, where requirements for corrosion resistance and mechanical strength are greater. In these steels, solidification starts at about 1450 oC with the formation of ferrite (α), which gives origin to austenite (γ) near 1300 oC. The σ phase nucleates preferentially in austenite/ferrite interface incoherent with the matrix in the range of 600 to 950 oC and compromises the cast steels toughness. Laves phase (Fe2Nb) is favored in stainless steels containing niobium. In this context, the objective of this research was to evaluate the effect of niobium on the formation of sigma and Laves phase in conventional austenitic-ferritic stainless steel and modified with 0.2, 0.5 and 1.5% niobium. The steels were heated at 1050 ºC for one hour and subsequently at 650 °C too, with cooling in water. The chemical compositions of sigma and Laves were determined semi-quantitative by energy dispersive X-rays (EDS). The amounts of Laves and sigma were obtained by computational thermodynamic simulation with the FactSage software. The results show that the thermodynamic simulation predicts Laves in the four steels, although in conventional stainless steel the microstructure is free from this phase. Regarding microstructural analyses by SEM, it is possible to observe the sigma phase in all steels, only after aging, while Laves appears in those modified with niobium in both heat treatment conditions. Whit regard to niobium, it favors the formation of sigma and Laves phase, however, the thermodynamic simulation results are different from the experimental ones.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Filho, A. I., Cirilo, K. F., Amaral, T. B. D. S., & Faria, T. K. (2025). Evaluation of sigma and laves phases in a niobium modified austenitic-ferritic stainless steel using FactSage software. Matéria (Rio de Janeiro), 30, e20250241. https://doi.org/10.1590/1517-7076-rmat-2025-0241
MLA 9
Filho, André Itman, et al. “Evaluation of sigma and laves phases in a niobium modified austenitic-ferritic stainless steel using FactSage software.” Matéria (Rio de Janeiro), vol. 30, 2025, p. e20250241. https://doi.org/10.1590/1517-7076-rmat-2025-0241.
Chicago
Filho, André Itman, Karen Farias Cirilo, Thiago Barreto da Silva Amaral, and Thiago Knust Faria. 2025. “Evaluation of sigma and laves phases in a niobium modified austenitic-ferritic stainless steel using FactSage software.” Matéria (Rio de Janeiro) 30: e20250241. https://doi.org/10.1590/1517-7076-rmat-2025-0241.
Harvard
Filho, A. I. et al. (2025) ‘Evaluation of sigma and laves phases in a niobium modified austenitic-ferritic stainless steel using FactSage software’, Matéria (Rio de Janeiro), 30, p. e20250241. doi:10.1590/1517-7076-rmat-2025-0241.
IEEE
A. I. Filho, K. F. Cirilo, T. B. D. S. Amaral, and T. K. Faria, “Evaluation of sigma and laves phases in a niobium modified austenitic-ferritic stainless steel using FactSage software,” Matéria (Rio de Janeiro), vol. 30, p. e20250241, 2025, doi: 10.1590/1517-7076-rmat-2025-0241.
BibTeX
@article{filho2025evaluation,
title = {{Evaluation of sigma and laves phases in a niobium modified austenitic-ferritic stainless steel using FactSage software}},
author = {Filho, André Itman and Cirilo, Karen Farias and Amaral, Thiago Barreto da Silva and Faria, Thiago Knust},
journal = {Matéria (Rio de Janeiro)},
year = {2025},
volume = {30},
pages = {e20250241},
doi = {10.1590/1517-7076-rmat-2025-0241},
url = {https://doi.org/10.1590/1517-7076-rmat-2025-0241}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Microstructure and Mechanical Properties of Steels
- sigma phase
- Laves phase
- Fe2Nb
- niobium
- duplex stainless steel
- phase formation
- thermodynamic modeling
- FactSage
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Filho, A. I., Cirilo, K. F., Amaral, T. B. D. S., & Faria, T. K. (2025). Evaluation of sigma and laves phases in a niobium modified austenitic-ferritic stainless steel using FactSage software. Matéria (Rio de Janeiro), 30, e20250241. https://doi.org/10.1590/1517-7076-rmat-2025-0241
How many times has this paper been cited?
0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Matéria (Rio de Janeiro): sign in and open the full text from this page.
Who wrote this paper?
André Itman Filho, Karen Farias Cirilo, Thiago Barreto da Silva Amaral, Thiago Knust Faria.
What is the DOI of this paper?
10.1590/1517-7076-rmat-2025-0241, permanently at https://doi.org/10.1590/1517-7076-rmat-2025-0241. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.