Paper · 2014 · Open access
Kinetics of Sigma Phase Precipitation in Niobium-Stabilized Austenitic Stainless Steel and Effect on the Mechanical Properties
Materials science forum, 783-786, 848–853 · Published 23 May 2014 · DOI 10.4028/www.scientific.net/msf.783-786.848
In brief
“Kinetics of Sigma Phase Precipitation in Niobium-Stabilized Austenitic Stainless Steel and Effect on the Mechanical Properties” is a 2014 paper by Xavier Ledoux and 11 co-authors, published in Materials science forum. OpenAlex counts 11 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Materials science forum.
- Citations
- 11
- Most cited in
- 2018 (2)
- Field-weighted impact
- 1.07
- References
- 8
- Authors
- 12
Abstract
Stabilized austenitic stainless steels are widely used in nuclear and oil industries. The 316 Nb steel grade presented in this study holds a small amount of delta ferrite in the austenitic matrix which tends to transform into sigma phase during prolonged exposures in the temperature range of 600-1000°C. Sigma phase is promoted by ferritic elements such as chromium, molybdenum, niobium and silicon. Time-Temperature-Transformation (TTT) diagram of the δ-ferrite evolution is established thanks to DSC experiments and quantitative metallographic analysis. It is observed that the highest sigma phase formation rate occurs between 800 and 900°C, and that the transformation of ferrite begins after a few minutes of exposure in this temperature range. The microstructure of transformed δ-ferrite is mostly dominated by the eutectoid mixture σ + γ2. Tensile tests were performed for three different cooling conditions: a significant embrittlement attributed to the δ-ferrite transformation is measured by a ductility loss for the lowest cooling rate.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Ledoux, X., Buy, F., Perron, A. P., Suzon, E., Farré, J., Marini, B., Guilbert, T., Wident, P., Texier, G., Vignal, V., Cortial, F., & Petit, P. (2014). Kinetics of Sigma Phase Precipitation in Niobium-Stabilized Austenitic Stainless Steel and Effect on the Mechanical Properties. Materials science forum, 783-786, 848–853. https://doi.org/10.4028/www.scientific.net/msf.783-786.848
MLA 9
Ledoux, Xavier, et al. “Kinetics of Sigma Phase Precipitation in Niobium-Stabilized Austenitic Stainless Steel and Effect on the Mechanical Properties.” Materials science forum, vol. 783-786, 2014, pp. 848–853. https://doi.org/10.4028/www.scientific.net/msf.783-786.848.
Chicago
Ledoux, Xavier, François Buy, Aurélien P. Perron, E. Suzon, J. Farré, Bernard Marini, Thomas Guilbert, et al. 2014. “Kinetics of Sigma Phase Precipitation in Niobium-Stabilized Austenitic Stainless Steel and Effect on the Mechanical Properties.” Materials science forum 783-786: 848–853. https://doi.org/10.4028/www.scientific.net/msf.783-786.848.
Harvard
Ledoux, X. et al. (2014) ‘Kinetics of Sigma Phase Precipitation in Niobium-Stabilized Austenitic Stainless Steel and Effect on the Mechanical Properties’, Materials science forum, 783-786, pp. 848–853. doi:10.4028/www.scientific.net/msf.783-786.848.
IEEE
X. Ledoux et al., “Kinetics of Sigma Phase Precipitation in Niobium-Stabilized Austenitic Stainless Steel and Effect on the Mechanical Properties,” Materials science forum, vol. 783-786, pp. 848–853, 2014, doi: 10.4028/www.scientific.net/msf.783-786.848.
BibTeX
@article{ledoux2014kinetics,
title = {{Kinetics of Sigma Phase Precipitation in Niobium-Stabilized Austenitic Stainless Steel and Effect on the Mechanical Properties}},
author = {Ledoux, Xavier and Buy, François and Perron, Aurélien P. and Suzon, E. and Farré, J. and Marini, Bernard and Guilbert, Thomas and Wident, P. and Texier, G. and Vignal, Vincent and Cortial, F. and Petit, Philippe},
journal = {Materials science forum},
year = {2014},
volume = {783-786},
pages = {848--853},
doi = {10.4028/www.scientific.net/msf.783-786.848},
url = {https://doi.org/10.4028/www.scientific.net/msf.783-786.848}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2014 | 1 | |
| 2016 | 1 | |
| 2017 | 1 | |
| 2018 | 2 | |
| 2019 | 1 | |
| 2023 | 1 | |
| 2024 | 2 | |
| 2025 | 1 | |
| 2026 | 1 |
Its field-weighted citation impact is 1.07: it has been cited 1.07 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Microstructure and Mechanical Properties of Steels
- sigma phase precipitation
- time-temperature-transformation diagram
- ductility loss
- cooling rate
- mechanical properties
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Ledoux, X., Buy, F., Perron, A. P., Suzon, E., Farré, J., Marini, B., Guilbert, T., Wident, P., Texier, G., Vignal, V., Cortial, F., & Petit, P. (2014). Kinetics of Sigma Phase Precipitation in Niobium-Stabilized Austenitic Stainless Steel and Effect on the Mechanical Properties. Materials science forum, 783-786, 848–853. https://doi.org/10.4028/www.scientific.net/msf.783-786.848
How many times has this paper been cited?
11 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Materials science forum: sign in and open the full text from this page.
Who wrote this paper?
Xavier Ledoux, François Buy, Aurélien P. Perron, E. Suzon, J. Farré, Bernard Marini, Thomas Guilbert, P. Wident, G. Texier, Vincent Vignal, F. Cortial, Philippe Petit.
What is the DOI of this paper?
10.4028/www.scientific.net/msf.783-786.848, permanently at https://doi.org/10.4028/www.scientific.net/msf.783-786.848. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.