Journal article · 2004 · Open access

Development of Commercially Viable Compliant Mechanisms Using the Pseudo-Rigid-Body Model: Case Studies of Parallel Mechanisms

Christopher A. Mattson, Larry L. Howell, Spencer P. Magleby

Journal of Intelligent Material Systems and Structures, 15(3), 195–202 · Published 1 March 2004 · DOI 10.1177/1045389x04033256

Open PDFView at the publisherCite this paper

In brief

“Development of Commercially Viable Compliant Mechanisms Using the Pseudo-Rigid-Body Model: Case Studies of Parallel Mechanisms” is a 2004 journal article by Christopher A. Mattson and 2 co-authors, published in Journal of Intelligent Material Systems and Structures. OpenAlex counts 60 citations as of 22 November 2026. It is open access: the full text is free to read at ScholarsArchive (Brigham Young University).

Citations
60
Most cited in
2024 (7)
Field-weighted impact
1.38
References
9
Authors
3

Abstract

Analysis and synthesis of compliant mechanisms has recently been the subject of significant study in the research community. This focus has led to a number of design approaches for developing compliant mechanisms. This paper describes the value of using the Pseudo-Rigid-Body Model (PRBM) to design compliant mechanisms for commercial products. Application of the PRBM is illustrated through the development of two parallel mechanisms: a bicycle derailleur and parallel-motion bicycle brakes. The PRBM allows compliant mechanisms to be modeled and analyzed as rigid-body mechanisms and significantly reduces the complexity of analysis. Mechanisms with straightforward properties are used to demonstrate the use of the PRBM to design commercially viable compliant mechanisms for required motion and force-deflection characteristics.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Mattson, C. A., Howell, L. L., & Magleby, S. P. (2004). Development of Commercially Viable Compliant Mechanisms Using the Pseudo-Rigid-Body Model: Case Studies of Parallel Mechanisms. Journal of Intelligent Material Systems and Structures, 15(3), 195–202. https://doi.org/10.1177/1045389x04033256

MLA 9

Mattson, Christopher A., et al. “Development of Commercially Viable Compliant Mechanisms Using the Pseudo-Rigid-Body Model: Case Studies of Parallel Mechanisms.” Journal of Intelligent Material Systems and Structures, vol. 15, no. 3, 2004, pp. 195–202. https://doi.org/10.1177/1045389x04033256.

Chicago

Mattson, Christopher A., Larry L. Howell, and Spencer P. Magleby. 2004. “Development of Commercially Viable Compliant Mechanisms Using the Pseudo-Rigid-Body Model: Case Studies of Parallel Mechanisms.” Journal of Intelligent Material Systems and Structures 15 (3): 195–202. https://doi.org/10.1177/1045389x04033256.

Harvard

Mattson, C. A., Howell, L. L. and Magleby, S. P. (2004) ‘Development of Commercially Viable Compliant Mechanisms Using the Pseudo-Rigid-Body Model: Case Studies of Parallel Mechanisms’, Journal of Intelligent Material Systems and Structures, 15(3), pp. 195–202. doi:10.1177/1045389x04033256.

IEEE

C. A. Mattson, L. L. Howell, and S. P. Magleby, “Development of Commercially Viable Compliant Mechanisms Using the Pseudo-Rigid-Body Model: Case Studies of Parallel Mechanisms,” Journal of Intelligent Material Systems and Structures, vol. 15, no. 3, pp. 195–202, 2004, doi: 10.1177/1045389x04033256.

BibTeX

@article{mattson2004development,
  title     = {{Development of Commercially Viable Compliant Mechanisms Using the Pseudo-Rigid-Body Model: Case Studies of Parallel Mechanisms}},
  author    = {Mattson, Christopher A. and Howell, Larry L. and Magleby, Spencer P.},
  journal   = {Journal of Intelligent Material Systems and Structures},
  year      = {2004},
  volume    = {15},
  number    = {3},
  pages     = {195--202},
  doi       = {10.1177/1045389x04033256},
  url       = {https://doi.org/10.1177/1045389x04033256}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201622
201711
201822
202055
202133
202244
202333
202477
202522
202655

Its field-weighted citation impact is 1.38: it has been cited 1.38 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Civil and Structural Engineering › Topology Optimization in Engineering

  • compliant mechanisms
  • pseudo-rigid-body model
  • parallel mechanism
  • bicycle brakes
  • mechanism synthesis
  • force-deflection characteristics

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Mattson, C. A., Howell, L. L., & Magleby, S. P. (2004). Development of Commercially Viable Compliant Mechanisms Using the Pseudo-Rigid-Body Model: Case Studies of Parallel Mechanisms. Journal of Intelligent Material Systems and Structures, 15(3), 195–202. https://doi.org/10.1177/1045389x04033256

How many times has this paper been cited?

60 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at ScholarsArchive (Brigham Young University): sign in and open the PDF from this page.

Who wrote this paper?

Christopher A. Mattson, Larry L. Howell, Spencer P. Magleby.

What is the DOI of this paper?

10.1177/1045389x04033256, permanently at https://doi.org/10.1177/1045389x04033256. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.