Journal article · 2014 · Open access

Development of a Four Bar Compliant Mechanism using Pseudo Rigid Body Model (PRBM)

Bhagyesh B. Deshmukh, Sujit Suresh Pardeshi, Roohshad Mistry, Sachin R. Kandharkar, Santosh Wagh

Procedia Materials Science, 6, 1034–1039 · Published 1 January 2014 · DOI 10.1016/j.mspro.2014.07.174

Open PDFView at the publisherCite this paper

In brief

“Development of a Four Bar Compliant Mechanism using Pseudo Rigid Body Model (PRBM)” is a 2014 journal article by Bhagyesh B. Deshmukh and 4 co-authors, published in Procedia Materials Science. OpenAlex counts 17 citations as of 22 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at Procedia Materials Science.

Citations
17
Most cited in
2017 (4)
Field-weighted impact
1.28
References
15
Authors
5

Abstract

A flexure based compliant parallel (4-bar) mechanism for linear translational motion actuated via a precision slide has been proposed. Due to the flexures a miniaturised mechanism is possible overcoming the limitations of rigid link mechanisms. In addition since a compliant mechanism has a monolithic structure no assembly is required. The compliant mechanism is designed using Pseudo Rigid Body Model (PRBM) approach and results obtained are compared with finite element analysis. An experimental setup is developed incorporating a microslide as an actuator for 4-bar compliant mechanism and displacement is measured using 3D optical profilometer. The performance of the compliant parallel mechanism demonstrated by experiments validates the simulation results and hence PRBM results. The effect of point of motion actuation on performance of mechanism is also investigated.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Deshmukh, B. B., Pardeshi, S. S., Mistry, R., Kandharkar, S. R., & Wagh, S. (2014). Development of a Four Bar Compliant Mechanism using Pseudo Rigid Body Model (PRBM). Procedia Materials Science, 6, 1034–1039. https://doi.org/10.1016/j.mspro.2014.07.174

MLA 9

Deshmukh, Bhagyesh B., et al. “Development of a Four Bar Compliant Mechanism using Pseudo Rigid Body Model (PRBM).” Procedia Materials Science, vol. 6, 2014, pp. 1034–1039. https://doi.org/10.1016/j.mspro.2014.07.174.

Chicago

Deshmukh, Bhagyesh B., Sujit Suresh Pardeshi, Roohshad Mistry, Sachin R. Kandharkar, and Santosh Wagh. 2014. “Development of a Four Bar Compliant Mechanism using Pseudo Rigid Body Model (PRBM).” Procedia Materials Science 6: 1034–1039. https://doi.org/10.1016/j.mspro.2014.07.174.

Harvard

Deshmukh, B. B. et al. (2014) ‘Development of a Four Bar Compliant Mechanism using Pseudo Rigid Body Model (PRBM)’, Procedia Materials Science, 6, pp. 1034–1039. doi:10.1016/j.mspro.2014.07.174.

IEEE

B. B. Deshmukh, S. S. Pardeshi, R. Mistry, S. R. Kandharkar, and S. Wagh, “Development of a Four Bar Compliant Mechanism using Pseudo Rigid Body Model (PRBM),” Procedia Materials Science, vol. 6, pp. 1034–1039, 2014, doi: 10.1016/j.mspro.2014.07.174.

BibTeX

@article{deshmukh2014development,
  title     = {{Development of a Four Bar Compliant Mechanism using Pseudo Rigid Body Model (PRBM)}},
  author    = {Deshmukh, Bhagyesh B. and Pardeshi, Sujit Suresh and Mistry, Roohshad and Kandharkar, Sachin R. and Wagh, Santosh},
  journal   = {Procedia Materials Science},
  year      = {2014},
  volume    = {6},
  pages     = {1034--1039},
  doi       = {10.1016/j.mspro.2014.07.174},
  url       = {https://doi.org/10.1016/j.mspro.2014.07.174}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201744
201833
201911
202011
202111
202211
202322
202411
202511
202611

Its field-weighted citation impact is 1.28: it has been cited 1.28 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Control and Systems Engineering › Piezoelectric Actuators and Control

  • compliant mechanisms
  • four-bar linkage
  • pseudo-rigid-body model
  • flexure hinges
  • parallel mechanism
  • miniaturization

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Deshmukh, B. B., Pardeshi, S. S., Mistry, R., Kandharkar, S. R., & Wagh, S. (2014). Development of a Four Bar Compliant Mechanism using Pseudo Rigid Body Model (PRBM). Procedia Materials Science, 6, 1034–1039. https://doi.org/10.1016/j.mspro.2014.07.174

How many times has this paper been cited?

17 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Procedia Materials Science: sign in and open the PDF from this page.

Who wrote this paper?

Bhagyesh B. Deshmukh, Sujit Suresh Pardeshi, Roohshad Mistry, Sachin R. Kandharkar, Santosh Wagh.

What is the DOI of this paper?

10.1016/j.mspro.2014.07.174, permanently at https://doi.org/10.1016/j.mspro.2014.07.174. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.