Preprint · 2024 · Open access

Cross-sectional Topology Optimization of Slender Soft Pneumatic Actuators using Genetic Algorithms and Geometrically Exact Beam Models

Leon Schindler, Kristin M. de Payrebrune

arXiv (Cornell University) · Published 20 December 2024 · DOI 10.48550/arxiv.2412.16138

Open PDFView at the publisherCite this paper

In brief

“Cross-sectional Topology Optimization of Slender Soft Pneumatic Actuators using Genetic Algorithms and Geometrically Exact Beam Models” is a 2024 preprint by Leon Schindler and Kristin M. de Payrebrune, published in arXiv (Cornell University). OpenAlex counts 1 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at arXiv (Cornell University).

Citations
1
Most cited in
2026 (1)
References
30
Authors
2

Abstract

The design of soft robots is still commonly driven by manual trial-and-error approaches, requiring the manufacturing of multiple physical prototypes, which in the end, is time-consuming and requires significant expertise. To reduce the number of manual interventions in this process, topology optimization can be used to assist the design process. The design is then guided by simulations and numerous prototypes can be tested in simulation rather than being evaluated through laborious experiments. To implement this simulation-driven design process, the possible design space of a slender soft pneumatic actuator is generalized to the design of the circular cross-section. We perform a black-box topology optimization using genetic algorithms to obtain a cross-sectional design of a soft pneumatic actuator that is capable of reaching a target workspace defined by the end-effector positions at different pressure values. This design method is evaluated for three different case studies and target workspaces, which were either randomly generated or specified by the operator of the design assistant. The black-box topology optimization based on genetic algorithms proves to be capable of finding good designs under given plausible target workspaces. We considered a simplified simulation model to verify the efficacy of the employed method. An experimental validation has not yet been performed. It can be concluded that the employed black-box topology optimization can assist in the design process for slender soft pneumatic actuators. It supports at searching for possible design prototypes that reach points specified by corresponding actuation pressures. This helps reduce the trial-and-error driven iterative manual design process and enables the operator to focus on prototypes that already offer a good viable solution.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Schindler, L., & de Payrebrune, K. M. (2024). Cross-sectional Topology Optimization of Slender Soft Pneumatic Actuators using Genetic Algorithms and Geometrically Exact Beam Models. arXiv (Cornell University). https://doi.org/10.48550/arxiv.2412.16138

MLA 9

Schindler, Leon, and Kristin M. de Payrebrune. “Cross-sectional Topology Optimization of Slender Soft Pneumatic Actuators using Genetic Algorithms and Geometrically Exact Beam Models.” arXiv (Cornell University), 2024. https://doi.org/10.48550/arxiv.2412.16138.

Chicago

Schindler, Leon and Kristin M. de Payrebrune. 2024. “Cross-sectional Topology Optimization of Slender Soft Pneumatic Actuators using Genetic Algorithms and Geometrically Exact Beam Models.” arXiv (Cornell University). https://doi.org/10.48550/arxiv.2412.16138.

Harvard

Schindler, L. and de Payrebrune, K. M. (2024) ‘Cross-sectional Topology Optimization of Slender Soft Pneumatic Actuators using Genetic Algorithms and Geometrically Exact Beam Models’, arXiv (Cornell University). doi:10.48550/arxiv.2412.16138.

IEEE

L. Schindler and K. M. de Payrebrune, “Cross-sectional Topology Optimization of Slender Soft Pneumatic Actuators using Genetic Algorithms and Geometrically Exact Beam Models,” arXiv (Cornell University), 2024, doi: 10.48550/arxiv.2412.16138.

BibTeX

@misc{schindler2024cross,
  title     = {{Cross-sectional Topology Optimization of Slender Soft Pneumatic Actuators using Genetic Algorithms and Geometrically Exact Beam Models}},
  author    = {Schindler, Leon and de Payrebrune, Kristin M.},
  howpublished = {arXiv (Cornell University)},
  year      = {2024},
  doi       = {10.48550/arxiv.2412.16138},
  url       = {https://doi.org/10.48550/arxiv.2412.16138}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • topology optimization
  • soft pneumatic actuators
  • soft robotics
  • genetic algorithm
  • geometrically exact beam model
  • black-box optimization
  • workplace design
  • actuation pressure

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Schindler, L., & de Payrebrune, K. M. (2024). Cross-sectional Topology Optimization of Slender Soft Pneumatic Actuators using Genetic Algorithms and Geometrically Exact Beam Models. arXiv (Cornell University). https://doi.org/10.48550/arxiv.2412.16138

How many times has this paper been cited?

1 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at arXiv (Cornell University): sign in and open the PDF from this page.

Who wrote this paper?

Leon Schindler, Kristin M. de Payrebrune.

What is the DOI of this paper?

10.48550/arxiv.2412.16138, permanently at https://doi.org/10.48550/arxiv.2412.16138. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.