Journal article · 2022
Optimal design and experimental validation of 3D printed soft pneumatic actuators
Smart Materials and Structures, 31(11), 115010 · Published 12 October 2022 · DOI 10.1088/1361-665x/ac95e3
In brief
“Optimal design and experimental validation of 3D printed soft pneumatic actuators” is a 2022 journal article by Yifu Lu and Liyong Tong, published in Smart Materials and Structures. OpenAlex counts 11 citations as of 22 November 2026, which puts it in the top 8% of works published in 2022 by citations. The publisher's version is not open access, and OpenAlex records no free legal copy.
- Citations
- 11
- Most cited in
- 2024 (3)
- Field-weighted impact
- 0.49
- References
- 52
- Authors
- 2
Abstract
This study develops a novel design of a unit cell-based bending-type soft pneumatic actuator, and formulates the design problem as compliant mechanisms under design-dependent pressure loadings. The proposed design is first optimized by using a topology optimization algorithm, in which the design-dependent loads and fluid-structure interface are tracked and formulated via finite element based approaches.… Read the full abstract at the publisher.
Excerpt. This paper is not open access.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Lu, Y., & Tong, L. (2022). Optimal design and experimental validation of 3D printed soft pneumatic actuators. Smart Materials and Structures, 31(11), 115010. https://doi.org/10.1088/1361-665x/ac95e3
MLA 9
Lu, Yifu, and Liyong Tong. “Optimal design and experimental validation of 3D printed soft pneumatic actuators.” Smart Materials and Structures, vol. 31, no. 11, 2022, p. 115010. https://doi.org/10.1088/1361-665x/ac95e3.
Chicago
Lu, Yifu and Liyong Tong. 2022. “Optimal design and experimental validation of 3D printed soft pneumatic actuators.” Smart Materials and Structures 31 (11): 115010. https://doi.org/10.1088/1361-665x/ac95e3.
Harvard
Lu, Y. and Tong, L. (2022) ‘Optimal design and experimental validation of 3D printed soft pneumatic actuators’, Smart Materials and Structures, 31(11), p. 115010. doi:10.1088/1361-665x/ac95e3.
IEEE
Y. Lu and L. Tong, “Optimal design and experimental validation of 3D printed soft pneumatic actuators,” Smart Materials and Structures, vol. 31, no. 11, p. 115010, 2022, doi: 10.1088/1361-665x/ac95e3.
BibTeX
@article{lu2022optimal,
title = {{Optimal design and experimental validation of 3D printed soft pneumatic actuators}},
author = {Lu, Yifu and Tong, Liyong},
journal = {Smart Materials and Structures},
year = {2022},
volume = {31},
number = {11},
pages = {115010},
doi = {10.1088/1361-665x/ac95e3},
url = {https://doi.org/10.1088/1361-665x/ac95e3}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2023 | 2 | |
| 2024 | 3 | |
| 2025 | 3 | |
| 2026 | 3 |
Its field-weighted citation impact is 0.49: it has been cited 0.49 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications
- soft pneumatic actuators
- topology optimization
- compliant mechanisms
- design-dependent loads
- fluid-structure interface
- 3D printing
- soft gripper
- unit cell design
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Lu, Y., & Tong, L. (2022). Optimal design and experimental validation of 3D printed soft pneumatic actuators. Smart Materials and Structures, 31(11), 115010. https://doi.org/10.1088/1361-665x/ac95e3
How many times has this paper been cited?
11 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
OpenAlex records no free legal copy. Check your library's access, the authors' pages or a repository, or ask the corresponding author for a copy.
Who wrote this paper?
Yifu Lu, Liyong Tong.
What is the DOI of this paper?
10.1088/1361-665x/ac95e3, permanently at https://doi.org/10.1088/1361-665x/ac95e3. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.