Journal article · 2015 · Open access
Characterization of Siloxane-poly(methyl methacrylate) Hybrid Films Obtained on a Tinplate Substrate Modified by the Addition of Organic and Inorganic Acids
Materials Research, 18(1), 151–163 · Published 1 February 2015 · DOI 10.1590/1516-1439.299514
In brief
“Characterization of Siloxane-poly(methyl methacrylate) Hybrid Films Obtained on a Tinplate Substrate Modified by the Addition of Organic and Inorganic Acids” is a 2015 journal article by Sandra Raquel Kunst and 6 co-authors, published in Materials Research. OpenAlex counts 44 citations as of 22 November 2026. It is open access under a CC BY-NC licence: the full text is free to read at Materials Research.
- Citations
- 44
- Most cited in
- 2023 (7)
- Field-weighted impact
- 1.44
- References
- 41
- Authors
- 7
Abstract
Tinplate is used to food packaging and other types of packages. The corrosion resistance of the tinplate has been study due the necessity of an alternative to high environmental impact of chromatization process. Therefore protective coatings as hybrid films base elaborations with different acids are studied to improve the barrier effect against corrosion. The objective of this work is characterize hybrid films deposited on a tinplate from a sol made up of the alkoxide precursors 3-(trimethoxysilylpropyl)methacrylate (TMSM), tetraethoxysilane (TEOS) and poly(methyl methacrylate) (PMMA) together with one of three acids (acetic, hydrochloric or nitric acid) and to verify their action against the corrosion of the substrate. The films were obtained by a dip-coating process and cured for 3 hours at 160 °C. The film hydrophobicity was determined by contact angle measurements, and the morphology was evaluated by SEM. FTIR measurements were performed to characterize the chemical structures of the films. The electrochemical behavior of the coatings was evaluated by techniques open circuit potential monitoring (OCP), potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The results demonstrate that the siloxane-PMMA films improve the protective properties of the tinplate, with the films obtained by acetic acid addition exhibiting the greatest improvement.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Kunst, S. R., Beltrami, L. V. R., Cardoso, H. R. P., Santana, J. A., Sarmento, V. H. V., Müller, I. L., & Malfatti, C. D. F. (2015). Characterization of Siloxane-poly(methyl methacrylate) Hybrid Films Obtained on a Tinplate Substrate Modified by the Addition of Organic and Inorganic Acids. Materials Research, 18(1), 151–163. https://doi.org/10.1590/1516-1439.299514
MLA 9
Kunst, Sandra Raquel, et al. “Characterization of Siloxane-poly(methyl methacrylate) Hybrid Films Obtained on a Tinplate Substrate Modified by the Addition of Organic and Inorganic Acids.” Materials Research, vol. 18, no. 1, 2015, pp. 151–163. https://doi.org/10.1590/1516-1439.299514.
Chicago
Kunst, Sandra Raquel, Lílian Vanessa Rossa Beltrami, Henrique Ribeiro Piaggio Cardoso, Josiane Andrade Santana, Víctor Hugo Vitorino Sarmento, Iduvirges Lourdes Müller, and Célia de Fraga Malfatti. 2015. “Characterization of Siloxane-poly(methyl methacrylate) Hybrid Films Obtained on a Tinplate Substrate Modified by the Addition of Organic and Inorganic Acids.” Materials Research 18 (1): 151–163. https://doi.org/10.1590/1516-1439.299514.
Harvard
Kunst, S. R. et al. (2015) ‘Characterization of Siloxane-poly(methyl methacrylate) Hybrid Films Obtained on a Tinplate Substrate Modified by the Addition of Organic and Inorganic Acids’, Materials Research, 18(1), pp. 151–163. doi:10.1590/1516-1439.299514.
IEEE
S. R. Kunst et al., “Characterization of Siloxane-poly(methyl methacrylate) Hybrid Films Obtained on a Tinplate Substrate Modified by the Addition of Organic and Inorganic Acids,” Materials Research, vol. 18, no. 1, pp. 151–163, 2015, doi: 10.1590/1516-1439.299514.
BibTeX
@article{kunst2015characterization,
title = {{Characterization of Siloxane-poly(methyl methacrylate) Hybrid Films Obtained on a Tinplate Substrate Modified by the Addition of Organic and Inorganic Acids}},
author = {Kunst, Sandra Raquel and Beltrami, Lílian Vanessa Rossa and Cardoso, Henrique Ribeiro Piaggio and Santana, Josiane Andrade and Sarmento, Víctor Hugo Vitorino and Müller, Iduvirges Lourdes and Malfatti, Célia de Fraga},
journal = {Materials Research},
year = {2015},
volume = {18},
number = {1},
pages = {151--163},
doi = {10.1590/1516-1439.299514},
url = {https://doi.org/10.1590/1516-1439.299514}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2017 | 6 | |
| 2018 | 4 | |
| 2019 | 5 | |
| 2020 | 3 | |
| 2021 | 2 | |
| 2022 | 6 | |
| 2023 | 7 | |
| 2024 | 3 | |
| 2025 | 3 | |
| 2026 | 1 |
Its field-weighted citation impact is 1.44: it has been cited 1.44 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Materials Science › Materials Chemistry › Corrosion Behavior and Inhibition
- tinplate
- corrosion protection
- 3-(trimethoxysilyl)propyl methacrylate
- tetraethoxysilane
- dip coating
- acetic acid
- hydrochloric acid
- nitric acid
Work with this paper
Most-cited papers in Materials Science
- Electric Field Effect in Atomically Thin Carbon FilmsKostya S. Novoselov, Andre K. Geim, Sergey V. Morozov and 5 more · Science · 2004 · 67,474 citations
- Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenidesROBERT D. SHANNON · Acta Crystallographica Section A · 1976 · 66,944 citations
- Ab initio molecular dynamics for liquid metalsGeorg Kresse, J. Häfner · Physical review. B, Condensed matter · 1993 · 46,320 citations
- Helical microtubules of graphitic carbonSumio Iijima · Nature · 1991 · 43,639 citations
- The rise of grapheneAndre K. Geim, Kostya S. Novoselov · Nature Materials · 2007 · 40,328 citations
Questions about this paper
How do I cite this paper in APA style?
Kunst, S. R., Beltrami, L. V. R., Cardoso, H. R. P., Santana, J. A., Sarmento, V. H. V., Müller, I. L., & Malfatti, C. D. F. (2015). Characterization of Siloxane-poly(methyl methacrylate) Hybrid Films Obtained on a Tinplate Substrate Modified by the Addition of Organic and Inorganic Acids. Materials Research, 18(1), 151–163. https://doi.org/10.1590/1516-1439.299514
How many times has this paper been cited?
44 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Materials Research: sign in and open the PDF from this page.
Who wrote this paper?
Sandra Raquel Kunst, Lílian Vanessa Rossa Beltrami, Henrique Ribeiro Piaggio Cardoso, Josiane Andrade Santana, Víctor Hugo Vitorino Sarmento, Iduvirges Lourdes Müller, Célia de Fraga Malfatti.
What is the DOI of this paper?
10.1590/1516-1439.299514, permanently at https://doi.org/10.1590/1516-1439.299514. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.