Journal article · 2014 · Open access

Hybrid films with (trimethoxysilylpropyl) methacrylate (TMSM), poly (methyl methacrylate) PMMA and tetraethoxysilane (TEOS) applied on tinplate

Sandra Raquel Kunst, Gustavo Alberto Ludwig, Henrique Ribeiro Piaggio Cardoso, Joseane Andrade Santana, Víctor Hugo Vitorino Sarmento, Célia de Fraga Malfatti

Materials Research, 17(suppl 1), 75–81 · Published 27 May 2014 · DOI 10.1590/s1516-14392014005000069

Open PDFView at the publisherCite this paper

In brief

“Hybrid films with (trimethoxysilylpropyl) methacrylate (TMSM), poly (methyl methacrylate) PMMA and tetraethoxysilane (TEOS) applied on tinplate” is a 2014 journal article by Sandra Raquel Kunst and 5 co-authors, published in Materials Research. OpenAlex counts 19 citations as of 22 November 2026. It is open access under a CC BY-NC licence: the full text is free to read at Materials Research.

Citations
19
Most cited in
2020 (4)
Field-weighted impact
0.72
References
18
Authors
6

Abstract

The tetraethoxysilane (TEOS) influences morphological and electrochemical properties of hybrid films by function of concentration. Moreover, the use of acetic acid as a catalyst in the sol enables a more complete hydrolysis of the silane precursors due to the fact that the acetic acid goes through a more complete ionization when in aqueous solution. The aim of this paper is to study the effect of the concentration of tetraethoxysilane (TEOS) on the protective properties of the film on tinplate substrate. The tinplate was coated with a hybrid film obtained from a sol-gel method constituted of the following alkoxide precursors: 3 - (trimetoxisililpropil) methacrylate (TMSM) and poly(methyl methacrylate) PMMA. The effect of tetraethoxysilane (TEOS) concentration has also been evaluated. The films hydrolysis was performed at a pH value of 3. 0 using acetic acid as a catalyst. The films were obtained by dip-coating process, cured for 3 hours at 160 ºC. The film morphology was evaluated by SEM and profilometry. The electrochemical behavior of the films was evaluated by open circuit potential monitoring, potentiodynamic polarization and electrochemical impedance spectroscopy. The film hydrophobicity was determined by contact angle measurements. The studied films have shown good performance as to corrosion resistance on tinplate. The hybrid film which was obtained through the addition of an excessive amount of TEOS (T3A3) showed increased thickness. Nevertheless, due to an intense densification of the film, promoted by the addition of TEOS, a formation of cracks was registered, thereby compromising the corrosion resistance.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Kunst, S. R., Ludwig, G. A., Cardoso, H. R. P., Santana, J. A., Sarmento, V. H. V., & Malfatti, C. D. F. (2014). Hybrid films with (trimethoxysilylpropyl) methacrylate (TMSM), poly (methyl methacrylate) PMMA and tetraethoxysilane (TEOS) applied on tinplate. Materials Research, 17(suppl 1), 75–81. https://doi.org/10.1590/s1516-14392014005000069

MLA 9

Kunst, Sandra Raquel, et al. “Hybrid films with (trimethoxysilylpropyl) methacrylate (TMSM), poly (methyl methacrylate) PMMA and tetraethoxysilane (TEOS) applied on tinplate.” Materials Research, vol. 17, no. suppl 1, 2014, pp. 75–81. https://doi.org/10.1590/s1516-14392014005000069.

Chicago

Kunst, Sandra Raquel, Gustavo Alberto Ludwig, Henrique Ribeiro Piaggio Cardoso, Joseane Andrade Santana, Víctor Hugo Vitorino Sarmento, and Célia de Fraga Malfatti. 2014. “Hybrid films with (trimethoxysilylpropyl) methacrylate (TMSM), poly (methyl methacrylate) PMMA and tetraethoxysilane (TEOS) applied on tinplate.” Materials Research 17 (suppl 1): 75–81. https://doi.org/10.1590/s1516-14392014005000069.

Harvard

Kunst, S. R. et al. (2014) ‘Hybrid films with (trimethoxysilylpropyl) methacrylate (TMSM), poly (methyl methacrylate) PMMA and tetraethoxysilane (TEOS) applied on tinplate’, Materials Research, 17(suppl 1), pp. 75–81. doi:10.1590/s1516-14392014005000069.

IEEE

S. R. Kunst, G. A. Ludwig, H. R. P. Cardoso, J. A. Santana, V. H. V. Sarmento, and C. D. F. Malfatti, “Hybrid films with (trimethoxysilylpropyl) methacrylate (TMSM), poly (methyl methacrylate) PMMA and tetraethoxysilane (TEOS) applied on tinplate,” Materials Research, vol. 17, no. suppl 1, pp. 75–81, 2014, doi: 10.1590/s1516-14392014005000069.

BibTeX

@article{kunst2014hybrid,
  title     = {{Hybrid films with (trimethoxysilylpropyl) methacrylate (TMSM), poly (methyl methacrylate) PMMA and tetraethoxysilane (TEOS) applied on tinplate}},
  author    = {Kunst, Sandra Raquel and Ludwig, Gustavo Alberto and Cardoso, Henrique Ribeiro Piaggio and Santana, Joseane Andrade and Sarmento, Víctor Hugo Vitorino and Malfatti, Célia de Fraga},
  journal   = {Materials Research},
  year      = {2014},
  volume    = {17},
  number    = {suppl 1},
  pages     = {75--81},
  doi       = {10.1590/s1516-14392014005000069},
  url       = {https://doi.org/10.1590/s1516-14392014005000069}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201522
201622
201722
201811
202044
202111
202211
202333
202422
202611

Its field-weighted citation impact is 0.72: it has been cited 0.72 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › Corrosion Behavior and Inhibition

  • hybrid films
  • poly(methyl methacrylate)
  • tetraethoxysilane
  • tinplate
  • corrosion protection
  • sol-gel coatings
  • acetic acid catalyst
  • film morphology

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Kunst, S. R., Ludwig, G. A., Cardoso, H. R. P., Santana, J. A., Sarmento, V. H. V., & Malfatti, C. D. F. (2014). Hybrid films with (trimethoxysilylpropyl) methacrylate (TMSM), poly (methyl methacrylate) PMMA and tetraethoxysilane (TEOS) applied on tinplate. Materials Research, 17(suppl 1), 75–81. https://doi.org/10.1590/s1516-14392014005000069

How many times has this paper been cited?

19 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Materials Research: sign in and open the PDF from this page.

Who wrote this paper?

Sandra Raquel Kunst, Gustavo Alberto Ludwig, Henrique Ribeiro Piaggio Cardoso, Joseane Andrade Santana, Víctor Hugo Vitorino Sarmento, Célia de Fraga Malfatti.

What is the DOI of this paper?

10.1590/s1516-14392014005000069, permanently at https://doi.org/10.1590/s1516-14392014005000069. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.