Conference paper · 2019 · Open access

Characterising 3D-printed Soft Fin Ray Robotic Fingers with Layer Jamming Capability for Delicate Grasping

Khaled Elgeneidy, Peter Lightbody, Simon Pearson, Gerhard M. Neumann

IEEE International Conference on Soft Robotics (RoboSoft), 143–148 · Published 1 April 2019 · DOI 10.1109/robosoft.2019.8722715

Open full textView at the publisherCite this paper

In brief

“Characterising 3D-printed Soft Fin Ray Robotic Fingers with Layer Jamming Capability for Delicate Grasping” is a 2019 conference paper by Khaled Elgeneidy and 3 co-authors, published in IEEE International Conference on Soft Robotics (RoboSoft). OpenAlex counts 63 citations as of 22 November 2026, which puts it in the top 3% of works published in 2019 by citations. It is open access under a CC BY licence: the full text is free to read at Figshare.

Citations
63
Most cited in
2022 (15)
Field-weighted impact
9.63
References
22
Authors
4

Abstract

Motivated by the growing need within the agri-food industry to automate the handling of delicate produce, this paper presents soft robotic fingers utilising the Fin Ray®effect to passively and gently adapt to delicate targets. The proposed Soft Fin Ray fingers feature thin ribs and are entirely 3D printed from a flexible material (NinjaFlex) to enhance their shape adaptation, compared to the original Fin Ray fingers. To overcome their reduced force generation, the effects of the angle and spacing of the flexible ribs were experimentally characterised. The results showed that at large displacements, layer jamming between tilted flexible ribs can significantly enhance the force generation, while minimal contact forces can be still maintained at small displacements for delicate grasping.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Elgeneidy, K., Lightbody, P., Pearson, S., & Neumann, G. M. (2019). Characterising 3D-printed Soft Fin Ray Robotic Fingers with Layer Jamming Capability for Delicate Grasping. IEEE International Conference on Soft Robotics (RoboSoft), 143–148. https://doi.org/10.1109/robosoft.2019.8722715

MLA 9

Elgeneidy, Khaled, et al. “Characterising 3D-printed Soft Fin Ray Robotic Fingers with Layer Jamming Capability for Delicate Grasping.” IEEE International Conference on Soft Robotics (RoboSoft), 2019, pp. 143–148. https://doi.org/10.1109/robosoft.2019.8722715.

Chicago

Elgeneidy, Khaled, Peter Lightbody, Simon Pearson, and Gerhard M. Neumann. 2019. “Characterising 3D-printed Soft Fin Ray Robotic Fingers with Layer Jamming Capability for Delicate Grasping.” IEEE International Conference on Soft Robotics (RoboSoft): 143–148. https://doi.org/10.1109/robosoft.2019.8722715.

Harvard

Elgeneidy, K. et al. (2019) ‘Characterising 3D-printed Soft Fin Ray Robotic Fingers with Layer Jamming Capability for Delicate Grasping’, IEEE International Conference on Soft Robotics (RoboSoft), pp. 143–148. doi:10.1109/robosoft.2019.8722715.

IEEE

K. Elgeneidy, P. Lightbody, S. Pearson, and G. M. Neumann, “Characterising 3D-printed Soft Fin Ray Robotic Fingers with Layer Jamming Capability for Delicate Grasping,” IEEE International Conference on Soft Robotics (RoboSoft), pp. 143–148, 2019, doi: 10.1109/robosoft.2019.8722715.

BibTeX

@inproceedings{elgeneidy2019characterising,
  title     = {{Characterising 3D-printed Soft Fin Ray Robotic Fingers with Layer Jamming Capability for Delicate Grasping}},
  author    = {Elgeneidy, Khaled and Lightbody, Peter and Pearson, Simon and Neumann, Gerhard M.},
  booktitle = {IEEE International Conference on Soft Robotics (RoboSoft)},
  year      = {2019},
  pages     = {143--148},
  doi       = {10.1109/robosoft.2019.8722715},
  url       = {https://doi.org/10.1109/robosoft.2019.8722715}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202066
202144
20221515
20231010
20241010
20251010
202688

Its field-weighted citation impact is 9.63: it has been cited 9.63 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • soft fingers
  • layer jamming
  • contact force

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Elgeneidy, K., Lightbody, P., Pearson, S., & Neumann, G. M. (2019). Characterising 3D-printed Soft Fin Ray Robotic Fingers with Layer Jamming Capability for Delicate Grasping. IEEE International Conference on Soft Robotics (RoboSoft), 143–148. https://doi.org/10.1109/robosoft.2019.8722715

How many times has this paper been cited?

63 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Figshare: sign in and open the full text from this page.

Who wrote this paper?

Khaled Elgeneidy, Peter Lightbody, Simon Pearson, Gerhard M. Neumann.

What is the DOI of this paper?

10.1109/robosoft.2019.8722715, permanently at https://doi.org/10.1109/robosoft.2019.8722715. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.