Journal article · 2021 · Open access
A 3D-Printed Fin Ray Effect Inspired Soft Robotic Gripper with Force Feedback
Micromachines, 12(10), 1141 · Published 23 September 2021 · DOI 10.3390/mi12101141
In brief
“A 3D-Printed Fin Ray Effect Inspired Soft Robotic Gripper with Force Feedback” is a 2021 journal article by Yang Yang and 5 co-authors, published in Micromachines. OpenAlex counts 70 citations as of 22 November 2026, which puts it in the top 2% of works published in 2021 by citations. It is open access under a CC BY licence: the full text is free to read at Micromachines.
- Citations
- 70
- Most cited in
- 2026 (18)
- Field-weighted impact
- 2.23
- References
- 25
- Authors
- 6
Abstract
Soft robotic grippers are able to carry out many tasks that traditional rigid-bodied grippers cannot perform but often have many limitations in terms of control and feedback. In this study, a Fin Ray effect inspired soft robotic gripper is proposed with its whole body directly 3D printed using soft material without the need of assembly. As a result, the soft gripper has a light weight, simple structure, is enabled with high compliance and conformability, and is able to grasp objects with arbitrary geometry. A force sensor is embedded in the inner side of the gripper, which allows the contact force required to grip the object to be measured in order to guarantee successful grasping and to provide the most suitable gripping force. In addition, it enables control and data monitoring of the gripper's operating state at all times. Characterization and grasping demonstration of the gripper are given in the Experiment section. Results show that the gripper can be used in a wide range of scenarios and applications, such as the service robot and food industry.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Yang, Y., Jin, K., Zhu, H., Song, G., Lu, H., & Kang, L. (2021). A 3D-Printed Fin Ray Effect Inspired Soft Robotic Gripper with Force Feedback. Micromachines, 12(10), 1141. https://doi.org/10.3390/mi12101141
MLA 9
Yang, Yang, et al. “A 3D-Printed Fin Ray Effect Inspired Soft Robotic Gripper with Force Feedback.” Micromachines, vol. 12, no. 10, 2021, p. 1141. https://doi.org/10.3390/mi12101141.
Chicago
Yang, Yang, Kaixiang Jin, Honghui Zhu, Gongfei Song, Haojian Lu, and Long Kang. 2021. “A 3D-Printed Fin Ray Effect Inspired Soft Robotic Gripper with Force Feedback.” Micromachines 12 (10): 1141. https://doi.org/10.3390/mi12101141.
Harvard
Yang, Y. et al. (2021) ‘A 3D-Printed Fin Ray Effect Inspired Soft Robotic Gripper with Force Feedback’, Micromachines, 12(10), p. 1141. doi:10.3390/mi12101141.
IEEE
Y. Yang, K. Jin, H. Zhu, G. Song, H. Lu, and L. Kang, “A 3D-Printed Fin Ray Effect Inspired Soft Robotic Gripper with Force Feedback,” Micromachines, vol. 12, no. 10, p. 1141, 2021, doi: 10.3390/mi12101141.
BibTeX
@article{yang2021printed,
title = {{A 3D-Printed Fin Ray Effect Inspired Soft Robotic Gripper with Force Feedback}},
author = {Yang, Yang and Jin, Kaixiang and Zhu, Honghui and Song, Gongfei and Lu, Haojian and Kang, Long},
journal = {Micromachines},
year = {2021},
volume = {12},
number = {10},
pages = {1141},
doi = {10.3390/mi12101141},
url = {https://doi.org/10.3390/mi12101141}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2022 | 7 | |
| 2023 | 12 | |
| 2024 | 16 | |
| 2025 | 17 | |
| 2026 | 18 |
Its field-weighted citation impact is 2.23: it has been cited 2.23 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications
- soft gripper
- 3D printing
- force feedback
- compliance
- conformability
- service robots
- food industry applications
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Yang, Y., Jin, K., Zhu, H., Song, G., Lu, H., & Kang, L. (2021). A 3D-Printed Fin Ray Effect Inspired Soft Robotic Gripper with Force Feedback. Micromachines, 12(10), 1141. https://doi.org/10.3390/mi12101141
How many times has this paper been cited?
70 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Micromachines: sign in and open the PDF from this page.
Who wrote this paper?
Yang Yang, Kaixiang Jin, Honghui Zhu, Gongfei Song, Haojian Lu, Long Kang.
What is the DOI of this paper?
10.3390/mi12101141, permanently at https://doi.org/10.3390/mi12101141. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.